abb
قاطع ABB Emax 2 الهوائي المنسحب
رقم الموديل: E2.2B-1600-W
Rated Current: 800 A / 1000 A / 1250 A / 1600 A / 2000 A / 2500 A / 3200 A / 4000 A / 5000 A / 6300 ABreaking Capacity: Up to 150 kA at 415 V AC (IEC 60947-2)Mounting: Withdrawable (Connected / Test / Disconnected)Trip Unit: Ekip Hi-Touch LSIG (standard); Ekip Touch, Ekip G options
متوفر — يُشحن داخل المملكة العربية السعودية
نرد خلال 4 ساعات عمل · الأسعار بالريال السعودي · توصيل لجميع مدن المملكة
منتجات أصلية 100%
رد خلال 4 ساعات
توصيل لجميع أنحاء المملكة
دعم فني متكامل
قاطع ABB Emax 2 الهوائي المنسحب — نظرة عامة
قاطع ABB Emax 2 الهوائي المنسحب هو معيار الصناعة لحماية التيارات العالية في التوزيع الكهربائي الحيوي، يغطي تيارات مقدرة من 800 حتى 6300 أمبير مع قدرة قطع تصل إلى 150 كيلوأمبير. آلية الانسحاب تتيح صيانة القاطع بينما تظل العوارض الكهربائية متوترة، مما يلغي الحاجة إلى إيقاف تشغيل الدوائر الصحية أثناء أعمال الصيانة. وحدة الرحلة الإلكترونية Ekip توفر قياس الطاقة والاتصالات عبر IEC 61850 وModbus. راز الشرق الأوسط يوفر قواطع Emax 2 المنسحبة مع خدمات التركيب والتشغيل في المملكة العربية السعودية.
المواصفات الفنية
المواصفات الكاملة لـ E2.2B-1600-W
- Rated Current
- 800 A / 1000 A / 1250 A / 1600 A / 2000 A / 2500 A / 3200 A / 4000 A / 5000 A / 6300 A
- Breaking Capacity
- Up to 150 kA at 415 V AC (IEC 60947-2)
- Mounting
- Withdrawable (Connected / Test / Disconnected)
- Trip Unit
- Ekip Hi-Touch LSIG (standard); Ekip Touch, Ekip G options
- Protection Functions
- Long-time (L), Short-time (S), Instantaneous (I), Ground fault (G), RCD (optional)
- Energy Meter
- Class 1 IEC 62053-21 integrated
- Communication
- Ekip Link — Modbus RTU, PROFIBUS DP, IEC 61850
- Zone Selectivity
- ZSI hardware input/output
- Voltage Rating
- Up to 1000 V AC
- Standard
- IEC 60947-2 / SASO
- Auxiliary Supply
- 100–240 V AC / 48–220 V DC
المميزات والفوائد
- Withdrawable cradle with three padlockable positions (Connected, Test, Disconnected) enabling full LOTO compliance for live-panel maintenance required on Saudi Aramco, SABIC, and SEC sites — eliminating the need to de-energise healthy circuits during ACB maintenance or replacement.
- Ekip Hi-Touch electronic trip unit with LSIG+G protection functions, including selective ground fault detection, adjustable short-time delay (STD) up to 500 ms with I²t limiting, and instantaneous override — all configurable via the integral graphical display without secondary injection equipment.
- Integrated Class 1 energy meter (IEC 62053-21) measuring V, A, kW, kVAR, kVA, kWh, power factor, and THD, eliminating the need for a separate multifunction meter at the main incomer position and reducing switchboard cost and complexity.
- Ekip Link communication module supporting Modbus RTU, PROFIBUS DP, CANopen, and IEC 61850 GOOSE messaging for native integration with ABB Ability digital substation SCADA and with Saudi Electricity Company (SEC) SCADA over standard protocols.
- Zone Selective Interlocking (ZSI) between Emax 2 breakers reduces fault clearance time from the full STD setting to instantaneous when downstream ZSI signals confirm a fault is local — providing both fast fault clearance and full selectivity for a multi-tier LV distribution scheme.
- Breaking capacity certified to 150 kA at 415 V under IEC 60947-2 with full Type Test documentation available for Saudi Electricity Company (SEC) switchgear approval submissions and Aramco SAES-P-100 contractor qualification packages.
- Compatible with full Emax 2 accessory range including motor operators, shunt trips, undervoltage releases, auxiliary contact blocks, and anti-pumping relays, allowing complete functional specification from a single manufacturer with single-source traceability.
التطبيقات الصناعية
- Main LV incomer switchboards in Saudi Electricity Company (SEC) approved primary and secondary substations, where withdrawable ACBs are mandated for all incomer positions rated above 800 A to enable live maintenance without customer supply interruption.
- Data centre main distribution frames (MDF) at hyperscale and co-location facilities being built at NEOM and Riyadh, where Uptime Institute Tier III concurrently maintainable requirements prohibit fixed-mount ACBs at any position in the critical power path.
- Hospital and healthcare facility main and emergency switchboards at Ministry of Health (MoH) and private hospital projects, where JCI accreditation and NFPA 99 healthcare facilities standards require withdrawal-capable ACBs on all generator-bus-tie incomer positions.
- Industrial main distribution boards at SABIC petrochemical complexes in Jubail Industrial City and Yanbu Industrial City, where SABIC SESG electrical engineering standards specify withdrawable ACBs rated to the prospective fault level of the 11 kV supply transformer.
- Offshore oil and gas platform main switchboards at Saudi Aramco offshore field developments, where SAES-P-100 specifies IEC 60947-2 ACBs with withdrawable mounting and integrated protection for all main and bus-tie positions in safety-critical areas.
- Uptime-critical telecom exchange and BTS hub power distribution at STC, Zain, and Mobily network infrastructure sites, where withdrawable ACBs are specified for 24/7 operations centres that cannot tolerate planned maintenance shutdowns.
- SEC grid connection switchgear at large solar and wind renewable energy plants under REPDO's National Renewable Energy Programme, where the main incomer ACB must be withdrawable to facilitate commissioning testing with the grid connection de-energised from the generation side only.
مورد معتمد في المملكة العربية السعودية
احصل على عرض سعر لـ قاطع ABB Emax 2 الهوائي المنسحب
نرد خلال 4 ساعات. أرسل رقم الموديل E2.2B-1600-W للحصول على سعر تنافسي مع التسليم في أنحاء المملكة العربية السعودية والخليج.
أسئلة شائعة حول قاطع ABB Emax 2 الهوائي المنسحب
أكثر الأسئلة شيوعاً من العملاء في المملكة العربية السعودية