
abb
مشغل المحرك المُغلَّف ABB K60 IEC
رقم الموديل: K60-200
نرد خلال 4 ساعات عمل · الأسعار بالريال السعودي · توصيل لجميع مدن المملكة
مشغل المحرك المُغلَّف ABB K60 IEC — نظرة عامة
مشغل ABB K60 المُغلَّف هو مشغل محرك مُجمَّع في المصنع يجمع بين كونتاكتور معيار IEC وريلاي الحمل الزائد الحراري والحامي اليدوي للمحرك والحاوية المقاومة للعوامل الجوية في وحدة واحدة للتثبيت الجداري بجانب المحرك. يتيح تركيب المشغل عند المحرك بدلاً من مركز التحكم بالمحرك MCC البعيد التخلص من الحاجة إلى مد كابلات القدرة الرئيسية، مما يقلل تكلفة الكابلات وانخفاض الجهد في الدوائر الطويلة. يوفر الحامي اليدوي المدمج حماية قصر الدائرة منسقة وفق النوع 2 (IEC 60947-4-1). راز الشرق الأوسط يتوفر لديه مخزون من مشغلات K60 لتطبيقات المضخات والمراوح في المملكة.
المواصفات الفنية
المواصفات الكاملة لـ K60-200
- Motor Power Range
- 0.37 kW–45 kW at 400 V AC (3-phase)
- Contactor Rating
- AC3 duty (IEC 60947-4-1)
- Overload Relay
- Adjustable thermal, manual/auto reset
- Short-Circuit Protection
- Type 2 coordination (IEC 60947-4-1)
- Enclosure Protection
- IP55 standard; IP65 option
- Enclosure Material
- GRP (glass-reinforced polyester) or steel
- Mounting
- Wall-mount (surface or bracket)
- Starting Method
- DOL standard; reversing / star-delta options
- Control Voltage
- 230 V AC / 110 V AC / 24 V DC
- Cable Entry
- 3× bottom/top knockouts for power + control
- Ambient Temperature
- −25 to +55°C
- Standard
- IEC 60947-4-1 Type 2 / SASO
المميزات والفوائد
- IEC 60947-4-1 Type 2 short-circuit coordination certified between manual motor protector, contactor, and overload relay, confirming both contactor and overload relay remain serviceable after a prospective fault — reducing maintenance cost on remote pump and fan installations where replacing failed starters requires a site visit.
- IP65-rated GRP enclosure option provides superior corrosion resistance in the salt-laden coastal industrial environments of Jubail, Yanbu, Dammam, and Jeddah, outperforming painted steel enclosures which require repainting within 2–3 years in direct coastal exposure.
- Factory-assembled and function-tested before shipment reduces on-site installation to enclosure mounting and cable termination — typically under two hours per starter — minimising installation labour cost for large pump station projects with dozens of remote motor starters.
- Integral manual motor protector provides motor branch circuit protection complying with IEC 60364-4-43, eliminating the need for a separate fuse or MCB in the motor branch circuit and reducing the number of protective devices required for each motor circuit.
- Adjustable thermal overload relay with 10:1 setting range and separate phase-loss trip ensures motor protection from overload, phase loss, and prolonged stall conditions, meeting ARAMCO SAES-B-068 motor protection requirements for pump motors at flow rates below minimum continuous flow.
- Available in reversing and star-delta configurations factory-wired and tested, enabling star-delta reduced-voltage starting for motors above 11 kW where direct-on-line starting current would cause voltage dip on the supply bus — a common requirement for NWC pump stations with limited supply transformer capacity.
- Removable gland plate with multiple cable entry knockouts accommodates standard conduit and cable gland sizes for Saudi Arabia's HDPE conduit and SWA armoured cable standards, simplifying field installation without custom drilling.
التطبيقات الصناعية
- Remote pump motor starters at NWC and MEWA municipal water pump stations in Saudi cities, where individual enclosed starters at each pump motor are more cost-effective than running power cables to a central MCC when the pump house footprint is large and pump motors are spread across the site.
- Cooling tower fan motor starters at HVAC installations for commercial buildings, hotels, and hospitals in Riyadh and Jeddah, where the outdoor IP65 GRP enclosure withstands direct sun exposure, sandstorms, and seasonal humidity cycling without corrosion or enclosure failure.
- Brine and seawater pump starters at SWCC and MARAFIQ desalination plant intake and outfall structures, where continuous salt spray and 100% humidity require IP65 GRP enclosures with non-ferrous internal components to achieve the 15-year service life specified in desalination plant maintenance contracts.
- Agricultural irrigation pump starters at Saudi farms under the Ministry of Environment, Water and Agriculture (MEWA) irrigation efficiency programme, where enclosed starters at remote field pumping locations with no weather protection require IP65 outdoor-rated enclosures.
- Sewage lift station pump starters for municipal wastewater infrastructure at Aramco residential communities and SABIC industrial housing complexes, where enclosed starters at the lift station wet well eliminate the need for a separate starter panel room, reducing civil construction cost.
- HVAC AHU fan motor starters at industrial facility air handling units, where a wall-mounted K60 at the fan motor eliminates the long power cable run back to the MCC while providing Type 2 coordination protection certified to IEC 60947-4-1 for ARAMCO and SABIC contractor project quality documentation.
- Process cooling pump starters at food and beverage manufacturing facilities in MODON industrial estates, where the enclosed starter design prevents contamination of the motor branch circuit wiring with process fluids and meets HACCP facility hygiene requirements for electrical equipment in food production areas.
مورد معتمد في المملكة العربية السعودية
احصل على عرض سعر لـ مشغل المحرك المُغلَّف ABB K60 IEC
نرد خلال 4 ساعات. أرسل رقم الموديل K60-200 للحصول على سعر تنافسي مع التسليم في أنحاء المملكة العربية السعودية والخليج.
أسئلة شائعة حول مشغل المحرك المُغلَّف ABB K60 IEC
أكثر الأسئلة شيوعاً من العملاء في المملكة العربية السعودية