weg
محرك WEG W22 NEMA High Efficiency 7.5 حصان قطبان إطار 213T
رقم الموديل: 007536ET3H213T-W22P/N: WEG.007536ET3H213TW22
نرد خلال 4 ساعات عمل · الأسعار بالريال السعودي · توصيل لجميع مدن المملكة
محرك WEG W22 NEMA High Efficiency 7.5 حصان قطبان إطار 213T — نظرة عامة
محرك WEG W22 NEMA High Efficiency ثلاثي الأطوار 7.5 حصان (5.5 كيلوواط)، قطبان، إطار 213T، سرعة 3540 دورة/دقيقة عند 60 هرتز، جهد 230/460 فولت، كفاءة 91.7% مع عزل من الفئة F وحماية IP55. رقم الكتالوج 007536ET3H213T-W22. مصمم للخدمة الصناعية المتواصلة في ظروف المملكة العربية السعودية القاسية. متوفر لدى راز الشرق الأوسط من المخزون المحلي لمشاريع أرامكو وسابك وأمعدن ونيوم بأسعار بالريال السعودي وعروض أسعار خلال 4 ساعات وتوصيل إلى الرياض والدمام وجدة والجبيل.
المواصفات الفنية
المواصفات الكاملة لـ 007536ET3H213T-W22
- Power
- 7.5HP (5.5kW)
- Voltage
- 230/460V (60Hz)
- Full Load Current
- 19.7/9.8A (230/460V)
- Efficiency
- High Efficiency (91.7% at full load)
- Power Factor
- 0.89
- Service Factor
- 1.15
- Frame
- 213T (NEMA T-frame)
- Speed
- 3540 RPM (2-pole, 60Hz)
- Synchronous Speed
- 3600 RPM
- Mounting
- F-1 foot (B3); C-face/D-flange optional
- Enclosure
- IP55 (TEFC (IC411))
- Insulation
- Class F / Class B rise (80K)
- Frame Material
- Cast iron
- Bearings
- Sealed, pre-lubricated (regreasable on larger frames)
- Standard
- NEMA MG-1, IEC 60034
- Design
- NEMA Design B
- Duty
- Continuous S1
- Ambient
- -20°C to +40°C, 1000 m.a.s.l.
- Certifications
- CE, INMETRO, UL
- Catalog Number
- 007536ET3H213T-W22
ELECTRICAL
MECHANICAL
STANDARDS
المميزات والفوائد
- WEG High Efficiency efficiency of 91.7% exceeds the Saudi Energy Efficiency Center (SEEC) minimum standards for motors above 0.75kW, cutting energy use versus an IE2 baseline and saving roughly 97 SAR per year on a 5.5kW unit running 8,000 hours annually at 0.10 SAR/kWh in Saudi industrial tariffs.
- Heavy one-piece cast-iron 213T frame with WEG's optimised W22 cooling resists the sand, heat and vibration of Saudi outdoor installations, holding a low Class B (80K) temperature rise on Class F insulation so the motor runs cool and lasts longer in 50°C ambient pump houses.
- IP55 TEFC (IC411) enclosure with V-ring shaft sealing keeps dust, humidity and washdown out of the windings, making the 007536ET3H213T-W22 suitable for coastal, desert and process-plant duty across the Eastern Province, Jubail and the Red Sea coast without enclosure upgrades.
- NEMA Design B torque characteristic delivers high locked-rotor and breakdown torque for reliable direct-on-line starting of pumps, fans, compressors and conveyors, while a 1.15 service factor gives a continuous overload margin for process load swings.
- Fully NEMA 213T interchangeable to NEMA MG-1 and IEC 60034, the 007536ET3H213T-W22 is a drop-in replacement for legacy motors of the same frame, simplifying maintenance, spares standardisation and procurement for Saudi EPC contractors and plant operators.
- Inverter-ready Class F insulation system tolerates PWM voltage stress from WEG CFW-series and other variable-speed drives, enabling energy-saving speed control on variable-torque pump and fan loads in line with Saudi Vision 2030 industrial-efficiency targets.
التطبيقات الصناعية
- Centrifugal pump motor drives at Saudi Aramco water-injection plants and National Water Company pumping stations across the Eastern Province, where the IP55 enclosure withstands sand, humidity and 50°C ambient temperatures of outdoor pump houses without derating.
- Cooling-tower fans, process pumps and extruder drives at SABIC and affiliated petrochemical complexes in Jubail and Al-Jubail Industrial City, running continuous S1 duty with the 1.15 service-factor overload margin for fluctuating process loads.
- Crusher, ball-mill and overland-conveyor drives at MAADEN mining and minerals operations in Ras Al-Khair and Al-Jalamid, where the cast-iron 213T frame and high breakdown torque handle the shock loads of bulk-materials handling.
- Kiln induced-draft fans, raw mills and packing-line drives at Saudi cement plants near Riyadh, Yanbu and Al-Ahsa, where the W22's low temperature rise extends winding life in high-temperature, dust-laden cement environments.
- High-lift and transmission pumping at SWCC desalination and water-transmission stations serving Riyadh, Jeddah and Dammam, providing the 3540 RPM, 7.5HP duty point required for large municipal water networks.
- HVAC air-handling, chilled-water and infrastructure pumping across the NEOM, Red Sea and Qiddiya giga-projects, where premium efficiency lowers life-cycle energy cost in line with the developments' sustainability and net-zero commitments.
مورد معتمد في المملكة العربية السعودية
احصل على عرض سعر لـ محرك WEG W22 NEMA High Efficiency 7.5 حصان قطبان إطار 213T
نرد خلال 4 ساعات. أرسل رقم الموديل 007536ET3H213T-W22 للحصول على سعر تنافسي مع التسليم في أنحاء المملكة العربية السعودية والخليج.
أسئلة شائعة حول محرك WEG W22 NEMA High Efficiency 7.5 حصان قطبان إطار 213T
أكثر الأسئلة شيوعاً من العملاء في المملكة العربية السعودية
منتجات weg الأخرى
WEG AHF Active Harmonic Filter
AHF-100A
WEG AHF-030 Active Harmonic Filter 30A 400 V
AHF-030 400 V
WEG AHF-030 Active Harmonic Filter 30A 480 V
AHF-030 480 V
WEG AHF-050 Active Harmonic Filter 50A 400 V
AHF-050 400 V
WEG AHF-050 Active Harmonic Filter 50A 480 V
AHF-050 480 V
WEG AHF-075 Active Harmonic Filter 75A 400 V
AHF-075 400 V