weg
محرك WEG W22 NEMA High Efficiency 15 حصان 4 أقطاب إطار 254T
رقم الموديل: 01518ET3H254T-W22P/N: WEG.01518ET3H254TW22
نرد خلال 4 ساعات عمل · الأسعار بالريال السعودي · توصيل لجميع مدن المملكة
محرك WEG W22 NEMA High Efficiency 15 حصان 4 أقطاب إطار 254T — نظرة عامة
محرك WEG W22 NEMA High Efficiency ثلاثي الأطوار 15 حصان (11 كيلوواط)، 4 أقطاب، إطار 254T، سرعة 1770 دورة/دقيقة عند 60 هرتز، جهد 230/460 فولت، كفاءة 92.4% مع عزل من الفئة F وحماية IP55. رقم الكتالوج 01518ET3H254T-W22. مصمم للخدمة الصناعية المتواصلة في ظروف المملكة العربية السعودية القاسية. متوفر لدى راز الشرق الأوسط من المخزون المحلي لمشاريع أرامكو وسابك وأمعدن ونيوم بأسعار بالريال السعودي وعروض أسعار خلال 4 ساعات وتوصيل إلى الرياض والدمام وجدة والجبيل.
المواصفات الفنية
المواصفات الكاملة لـ 01518ET3H254T-W22
- Power
- 15HP (11kW)
- Voltage
- 230/460V (60Hz)
- Full Load Current
- 38.0/19.0A (230/460V)
- Efficiency
- High Efficiency (92.4% at full load)
- Power Factor
- 0.84
- Service Factor
- 1.15
- Frame
- 254T (NEMA T-frame)
- Speed
- 1770 RPM (4-pole, 60Hz)
- Synchronous Speed
- 1800 RPM
- Mounting
- F-1 foot (B3); C-face/D-flange optional
- Enclosure
- IP55 (TEFC (IC411))
- Insulation
- Class F / Class B rise (80K)
- Frame Material
- Cast iron
- Bearings
- Sealed, pre-lubricated (regreasable on larger frames)
- Standard
- NEMA MG-1, IEC 60034
- Design
- NEMA Design B
- Duty
- Continuous S1
- Ambient
- -20°C to +40°C, 1000 m.a.s.l.
- Certifications
- CE, INMETRO, UL
- Catalog Number
- 01518ET3H254T-W22
ELECTRICAL
MECHANICAL
STANDARDS
المميزات والفوائد
- WEG High Efficiency efficiency of 92.4% exceeds the Saudi Energy Efficiency Center (SEEC) minimum standards for motors above 0.75kW, cutting energy use versus an IE2 baseline and saving roughly 195 SAR per year on a 11kW unit running 8,000 hours annually at 0.10 SAR/kWh in Saudi industrial tariffs.
- Heavy one-piece cast-iron 254T frame with WEG's optimised W22 cooling resists the sand, heat and vibration of Saudi outdoor installations, holding a low Class B (80K) temperature rise on Class F insulation so the motor runs cool and lasts longer in 50°C ambient pump houses.
- IP55 TEFC (IC411) enclosure with V-ring shaft sealing keeps dust, humidity and washdown out of the windings, making the 01518ET3H254T-W22 suitable for coastal, desert and process-plant duty across the Eastern Province, Jubail and the Red Sea coast without enclosure upgrades.
- NEMA Design B torque characteristic delivers high locked-rotor and breakdown torque for reliable direct-on-line starting of pumps, fans, compressors and conveyors, while a 1.15 service factor gives a continuous overload margin for process load swings.
- Fully NEMA 254T interchangeable to NEMA MG-1 and IEC 60034, the 01518ET3H254T-W22 is a drop-in replacement for legacy motors of the same frame, simplifying maintenance, spares standardisation and procurement for Saudi EPC contractors and plant operators.
- Inverter-ready Class F insulation system tolerates PWM voltage stress from WEG CFW-series and other variable-speed drives, enabling energy-saving speed control on variable-torque pump and fan loads in line with Saudi Vision 2030 industrial-efficiency targets.
التطبيقات الصناعية
- Centrifugal pump motor drives at Saudi Aramco water-injection plants and National Water Company pumping stations across the Eastern Province, where the IP55 enclosure withstands sand, humidity and 50°C ambient temperatures of outdoor pump houses without derating.
- Cooling-tower fans, process pumps and extruder drives at SABIC and affiliated petrochemical complexes in Jubail and Al-Jubail Industrial City, running continuous S1 duty with the 1.15 service-factor overload margin for fluctuating process loads.
- Crusher, ball-mill and overland-conveyor drives at MAADEN mining and minerals operations in Ras Al-Khair and Al-Jalamid, where the cast-iron 254T frame and high breakdown torque handle the shock loads of bulk-materials handling.
- Kiln induced-draft fans, raw mills and packing-line drives at Saudi cement plants near Riyadh, Yanbu and Al-Ahsa, where the W22's low temperature rise extends winding life in high-temperature, dust-laden cement environments.
- High-lift and transmission pumping at SWCC desalination and water-transmission stations serving Riyadh, Jeddah and Dammam, providing the 1770 RPM, 15HP duty point required for large municipal water networks.
- HVAC air-handling, chilled-water and infrastructure pumping across the NEOM, Red Sea and Qiddiya giga-projects, where premium efficiency lowers life-cycle energy cost in line with the developments' sustainability and net-zero commitments.
مورد معتمد في المملكة العربية السعودية
احصل على عرض سعر لـ محرك WEG W22 NEMA High Efficiency 15 حصان 4 أقطاب إطار 254T
نرد خلال 4 ساعات. أرسل رقم الموديل 01518ET3H254T-W22 للحصول على سعر تنافسي مع التسليم في أنحاء المملكة العربية السعودية والخليج.
أسئلة شائعة حول محرك WEG W22 NEMA High Efficiency 15 حصان 4 أقطاب إطار 254T
أكثر الأسئلة شيوعاً من العملاء في المملكة العربية السعودية
منتجات weg الأخرى
WEG AHF Active Harmonic Filter
AHF-100A
WEG AHF-030 Active Harmonic Filter 30A 400 V
AHF-030 400 V
WEG AHF-030 Active Harmonic Filter 30A 480 V
AHF-030 480 V
WEG AHF-050 Active Harmonic Filter 50A 400 V
AHF-050 400 V
WEG AHF-050 Active Harmonic Filter 50A 480 V
AHF-050 480 V
WEG AHF-075 Active Harmonic Filter 75A 400 V
AHF-075 400 V