Parker Hannifin
وصلة باركر لطرف الخرطوم 10-8FPB-S مقاس 1/2"
رقم الموديل: 10-8FPB-SP/N: PRKR-10-8FPB-S
نرد خلال 4 ساعات عمل · الأسعار بالريال السعودي · توصيل لجميع مدن المملكة
وصلة باركر لطرف الخرطوم 10-8FPB-S مقاس 1/2" — نظرة عامة
يوفر راز الشرق الأوسط وصلة باركر الأصلية لطرف الخرطوم 10-8FPB-S من سلسلة 10 في المملكة العربية السعودية. هذه الوصلة BSP Straight لخرطوم مقاس 1/2" (12.7 mm) تشكل وصلة محكمة من نوع BSP 60-degree cone / bonded seal ضمن نظام Parkrimp بدون كشط، وتتحمل ضغط تشغيل حتى 350 بار (5,076 رطل/بوصة²) بمعامل أمان 4:1. الجسم من الفولاذ الكربوني مطلي بالزنك مقاوم للتآكل. مثالية لتجميعات الخراطيم في مشاريع أرامكو السعودية وسابك ومعادن ونيوم. يقدم راز الشرق الأوسط خدمة الكبس Parkrimp داخلياً وفق كتالوج باركر 4400 مع تتبع كامل ومخزون في الدمام والرياض وجدة وتوصيل سريع لدول الخليج واستجابة لطلبات الأسعار خلال 4 ساعات.
المواصفات الفنية
المواصفات الكاملة لـ 10-8FPB-S
- Series
- 10
- Type
- BSP Straight
- Hose Size
- 1/2" (12.7 mm)
- Configuration
- straight
- Sealing
- BSP 60-degree cone / bonded seal
- Working Pressure
- up to 350 bar (5,076 PSI)
- Burst Pressure
- 1400 bar (20,305 PSI)
- Body
- Carbon steel
- Plating
- Zinc / zinc-nickel, corrosion-resistant
- Crimp System
- Parker Parkrimp no-skive
- Thread Standard
- ISO 8434-6 / BS 5200 BSP
- Catalogue
- Parker 4400
- Parker Series
- 10
FITTING SPECIFICATIONS
MATERIALS & SYSTEM
STANDARDS
المميزات والفوائد
- Genuine Parker 10-8FPB-S bsp straight crimp fitting for 1/2" hose, forming a leak-tight BSP 60-degree cone / bonded seal connection rated to 350 bar (5,076 PSI) with a 4:1 safety factor. This specification advantage shortens technical evaluation for Saudi EPC contractors and helps standardise spares across multi-site installations in the Kingdom.
- No-skive Parkrimp design crimps directly over the hose cover, eliminating the skiving step and the assembly errors that cause most premature hydraulic failures on Saudi equipment. Razz Middle East backs every supply with documented lead times and competitor cross-referencing so procurement teams in the Eastern Province can specify with full confidence.
- Machined carbon-steel body with corrosion-resistant zinc/zinc-nickel plating for extended salt-spray life in the humid, salt-laden Eastern Province and Red Sea coastal environments. The result is fewer unplanned shutdowns and a longer maintenance interval on critical hydraulic equipment operating in demanding Saudi industrial conditions.
- The BSP 60-degree cone / bonded seal sealing method provides a vibration-resistant, re-sealable connection that keeps high-pressure ARAMCO and SABIC circuits leak-free through repeated service and reassembly. These engineered characteristics directly support the reliability and approved-vendor documentation requirements demanded on ARAMCO, SABIC and Vision 2030 contracts.
- The straight configuration provides the lowest-restriction inline connection, protecting the assembly from sharp bends at the fitting and easing installation in tight machinery envelopes. Genuine factory traceability protects the warranty status of the complete assembly and removes the counterfeit risk that grey-market hydraulic parts carry across the Kingdom's safety-critical hydraulic systems and process plant.
- Supplied by Razz Middle East with in-house Parkrimp crimping to Catalogue 4400 data, full traceability, four-hour RFQ response and stock in Dammam, Riyadh and Jeddah for fast GCC delivery. Local stock keeps replacement and project quantities available for fast Kingdom-wide despatch and onward GCC delivery to every major industrial city.
التطبيقات الصناعية
- Termination of Saudi Aramco hydraulic tool, skid and rig hose assemblies during turnarounds at Abqaiq, Khurais and Shaybah, where the BSP threaded connection stays leak-free under vibration and high pressure. Razz Middle East supplies finished, pressure-ready assemblies with full traceability and a four-hour RFQ response to keep these operations on schedule.
- Mobile-plant and crane hose-assembly terminations on NEOM, The Line and Red Sea Project sites, with the straight geometry easing routing in tight excavator and crane envelopes. Genuine Parker product and local Eastern Province stock minimise downtime and meet the approved-vendor and documentation requirements of the Kingdom's major operators across Vision 2030 developments.
- SABIC, SADAF and PETROKEMYA process-actuation and machine-hydraulic assemblies in the Jubail and Yanbu industrial cities, supporting leak-free, low-emission housekeeping in continuous-process plant. Our team supports selection, cross-referencing and documented lead times so maintenance and project planners can specify the correct part with confidence.
- Aramco drilling and workover contractor hose assemblies for power packs and test skids, terminated with traceable Parker fittings to meet approved-vendor documentation requirements. Kingdom-wide delivery from Dammam, Riyadh and Jeddah, plus onward GCC despatch, ensures the right hydraulic components reach site when they are needed.
- MAADEN mining and SWCC/NWC water-plant hydraulic assemblies requiring durable, corrosion-resistant terminations, supported by Razz Middle East's local Dammam and Riyadh stock. Cut-to-length and in-house Parkrimp assembly capability mean customers receive type-validated, ready-to-install components rather than loose parts requiring field rework.
- General Saudi manufacturing, steel and material-handling hydraulic assemblies requiring finished, pressure-tested Parkrimp terminations, supplied ready-to-install by Razz Middle East with GCC delivery. This combination of genuine product and local technical support underpins reliable, leak-free hydraulic operation across Saudi Arabia's most demanding industries.
مورد معتمد في المملكة العربية السعودية
احصل على عرض سعر لـ وصلة باركر لطرف الخرطوم 10-8FPB-S مقاس 1/2"
نرد خلال 4 ساعات. أرسل رقم الموديل 10-8FPB-S للحصول على سعر تنافسي مع التسليم في أنحاء المملكة العربية السعودية والخليج.
أسئلة شائعة حول وصلة باركر لطرف الخرطوم 10-8FPB-S مقاس 1/2"
أكثر الأسئلة شيوعاً من العملاء في المملكة العربية السعودية
منتجات Parker Hannifin الأخرى
Parker 10-10FPB-S BSP Straight Hose-End Fitting 5/8"
10-10FPB-S
Parker 10-12FPB-S BSP Straight Hose-End Fitting 3/4"
10-12FPB-S
Parker 10-16FPB-S BSP Straight Hose-End Fitting 1"
10-16FPB-S
Parker 10-4FPB-E90 BSP 90 Elbow Hose-End Fitting 1/4"
10-4FPB-E90
Parker 10-4FPB-S BSP Straight Hose-End Fitting 1/4"
10-4FPB-S
Parker 10-6FPB-E90 BSP 90 Elbow Hose-End Fitting 3/8"
10-6FPB-E90