Grundfos logo
CM3-5 A-R-I-E-AQQE

الصورة قادمة قريباً

Grundfos

مضخة غروندفوس CM3-5 أفقية متعددة المراحل

رقم الموديل: CM3-5 A-R-I-E-AQQE

Flow Rate: 0.5–4.5 m³/hHead: Up to 68 m (5 stages)Working Pressure: 10 bar maxMotor Power: 0.37–0.55 kW
متوفر — يُشحن داخل المملكة العربية السعودية
WhatsApp

نرد خلال 4 ساعات عمل · الأسعار بالريال السعودي · توصيل لجميع مدن المملكة

منتجات أصلية 100%
رد خلال 4 ساعات
توصيل لجميع أنحاء المملكة
دعم فني متكامل

مضخة غروندفوس CM3-5 أفقية متعددة المراحل — نظرة عامة

تُعدّ مضخة غروندفوس CM3-5 مضخة طرد مركزي متعددة المراحل أفقية مدمجة مصممة لتطبيقات إمداد المياه الخفيفة ورفع الضغط ونقل السوائل حيث تكون مساحة التركيب محدودة. يغطي طراز CM3-5 A-R-I-E-AQQE تدفقاً اسمياً قدره 3 م³/ساعة عند حوالي 68 متر ارتفاع ضغط عبر خمس مراحل من الفولاذ المقاوم للصدأ، مع مجموعة مواد ختم مناسبة تماماً للمياه قليلة الملوحة أو المعالجة كيميائياً.

في المملكة العربية السعودية، تُستخدم سلسلة CM من غروندفوس على نطاق واسع في أعباء ضغط المباني السكنية الأسرية وصغيرة الحجم التجارية، إذ تخدم السوق الكبيرة للفلل الخاصة والمجمعات في الرياض وجدة والدمام والمدن الثانوية حيث يكون ضغط المياه البلدي غير كافٍ للطوابق العليا. كما تُنشر CM3-5 على نطاق واسع في أعباء ضغط نظام مياه الشرب بالتناضح العكسي لوحدات RO الصناعية الصغيرة والمتوسطة وموزعات مياه RO التجارية — سوق ينمو بسرعة في المملكة.

في التطبيقات الزراعية، تتولى CM3-5 أعباء ضغط الري بالتنقيط الموضعي في البيوت المحمية والأنفاق البلاستيكية المغلقة، حيث تجعلها بصمتها المدمجة وصوتها المنخفض وتوفر التيار الأحادي مناسبةً للتركيب في مباني الدعم الزراعي.

تحتفظ راز الشرق الأوسط بمخزون من مضخات CM3-5 من غروندفوس وسلسلة CM الأوسع عبر شبكة التوزيع السعودية، مع توافر في اليوم ذاته في الرياض وجدة والدمام، إضافةً إلى مجموعة كاملة من قطع غيار CM لضمان إصلاح سريع وفعال من حيث التكلفة.

المواصفات الفنية

المواصفات الكاملة لـ CM3-5 A-R-I-E-AQQE

Flow Rate
0.5–4.5 m³/h
Head
Up to 68 m (5 stages)
Working Pressure
10 bar max
Motor Power
0.37–0.55 kW
Shaft Seal
AQQE (ceramic/EPDM)
Casing Material
AISI 304 stainless steel
Power Supply
1×220 V or 3×380–415 V, 50 Hz
Max Liquid Temperature
60°C

المميزات والفوائد

  • Five-stage AISI 304 stainless steel construction in a compact horizontal footprint delivers up to 68 m head at 3 m³/h, covering residential building pressurisation, RO system duty, and small agricultural irrigation in a single pump platform.
  • AQQE ceramic/EPDM mechanical seal handles residual chlorine and pH-adjusted water in RO product water distribution systems, resisting chemical degradation that causes premature seal failure in conventional rubber-faced seals.
  • Standardised base plate mounting pattern enables direct in-kind replacement of single-stage booster pumps in existing Saudi residential compound and commercial building pump rooms without structural modification.
  • Three replaceable service components — mechanical seal, impeller set, and bearing — are accessible without special tools, reducing planned maintenance time to under 45 minutes and eliminating the need for specialist pump technicians.
  • Single-phase 220 V and three-phase 380–415 V motor options provide flexibility for installation in residential applications (single phase) and industrial/commercial settings (three phase) from the same hydraulic pump body.
  • Maximum liquid temperature of 60°C supports both cold potable water and low-temperature hot water circulation duties, covering heating system make-up and solar water heater circulation applications in Saudi residential buildings.

التطبيقات الصناعية

  • Private villa and residential compound pressurisation in Riyadh, Jeddah, Dammam, and secondary Saudi cities, where CM3-5's compact horizontal format fits in tight pump room spaces and delivers adequate head for 2–4 storey residential buildings.
  • Small-to-medium industrial and commercial reverse osmosis drinking water system pressure duty, pressurising RO membranes at 6–8 bar feed pressure for on-site water purification in Saudi factories, offices, and commercial buildings.
  • Drip irrigation pressurisation in enclosed agricultural greenhouses and polytunnels across Saudi Arabia, where single-phase availability and low noise emissions allow installation in occupied agricultural support structures.
  • Light chemical transfer and dosing system feed duties in water treatment and industrial cleaning applications, where the AISI 304 stainless steel wetted construction and ceramic/EPDM seal handle mildly corrosive liquids safely.
  • Solar water heater and heat pump circulation duties in residential and small commercial buildings, where the pump's 60°C temperature rating and compact horizontal orientation suit the constrained plant spaces of Saudi rooftop solar installations.

مورد معتمد في المملكة العربية السعودية

احصل على عرض سعر لـ مضخة غروندفوس CM3-5 أفقية متعددة المراحل

نرد خلال 4 ساعات. أرسل رقم الموديل CM3-5 A-R-I-E-AQQE للحصول على سعر تنافسي مع التسليم في أنحاء المملكة العربية السعودية والخليج.

WhatsApp

أسئلة شائعة حول مضخة غروندفوس CM3-5 أفقية متعددة المراحل

أكثر الأسئلة شيوعاً من العملاء في المملكة العربية السعودية