abb
ABB ACS880-07 Cabinet-Mounted Drive
Model: ACS880-07-0145A-3
4-hour response · Pricing in SAR · Delivery across all KSA regions
ACS880-07-0145A-3 — ABB ACS880-07 Cabinet-Mounted Drive
The ABB ACS880-07 Cabinet-Mounted Drive is a factory-assembled, ready-to-install variable speed drive enclosure that brings together all the components an engineer would otherwise source and wire separately — main switch-disconnector, semiconductor fuses, du/dt output filter, output reactor, and the ACS880 drive module itself — in a single IP42 or IP54 rated steel cabinet. Available in power ratings from 11 kW to 5.6 MW on 380–690 V AC, the ACS880-07 is built on the same Direct Torque Control (DTC) platform as the standalone ACS880-01, delivering the same sub-2 ms torque response and ±1% torque accuracy that heavy process applications demand. The factory build means all component sizing, wiring, and protection coordination are handled under ABB's engineering responsibility, with a single CE declaration covering the entire assembly — a critical compliance advantage on Saudi Aramco and SABIC projects that require IEC 61800-5-1 drive system certification.
The engineering advantages of a cabinet-mounted drive extend well beyond compliance. The integrated du/dt output filter limits the motor terminal voltage rate of rise to below 500 V/μs even on long cable runs — essential when motors are 50 to 200 metres from the drive as is common in Saudi Arabia's large pump stations and compressor buildings. The IP54 enclosure option allows installation in electrical rooms that are not strictly climate-controlled, handling ambient temperatures up to 40°C without derating and accepting brief excursions to 50°C. Cabinet widths start at 600 mm and extend to multi-bay configurations for high-power frames, all designed for 2.2 m standard electrical room clearance. The complete unit ships on a skid, undergoes ABB factory acceptance testing (FAT) before dispatch, and arrives with an indexed wiring diagram set reducing commissioning time by 30–50% compared to field-assembled drive panels.
In Saudi Arabia's oil and gas sector, the ACS880-07 Saudi Arabia cabinet drive is the standard specification for motor control rooms (MCRs) at ARAMCO upstream facilities, NGL fractionation trains, and SABIC ethylene plant compressor trains in Jubail Industrial City. Its ability to drive centrifugal pumps in the 200–3000 kW range, where close-coupled variable speed control reduces energy consumption by 40–60% versus throttle control, aligns directly with Saudi Aramco's Energy Conservation Standard (SAES-K-001). SWCC desalination stations use the ACS880-07 for high-pressure seawater reverse osmosis (SWRO) pump drives where reliability under 24/7 continuous operation is non-negotiable. Vision 2030 giga-projects including NEOM's utility infrastructure and the Red Sea Project cooling systems specify the ACS880-07 for its combination of smart grid communications (IEC 61850 option) and ABB Ability cloud condition monitoring.
Razz Middle East holds engineering stock of the ACS880-07 in the most common process industry ratings (75 kW, 110 kW, 160 kW, 250 kW, 315 kW) for immediate dispatch to project sites across Saudi Arabia. We provide full FAT documentation review, SAR-quoted supply, site delivery to Riyadh, Jeddah, Dammam, Al Khobar, Jubail, and Yanbu, and in-kingdom commissioning and startup services by our certified ABB drive engineers.
Technical Specifications
Full specifications for the ACS880-07-0145A-3
- Power Range
- 11 kW–5.6 MW
- Voltage
- 380–690 V AC
- Enclosure
- IP42 / IP54
- Control
- Direct Torque Control (DTC)
- Includes
- Main switch-disconnector, semiconductor fuses, du/dt filter, output reactor
- Ambient Temperature
- -15 to +40°C (IP54: to +50°C with derating)
- Communication
- PROFIBUS, EtherNet/IP, Modbus RTU/TCP, PROFINET
- Cooling
- Forced air
- Certification
- CE, IEC 61800-5-1
- Cabinet Width
- 600 mm standard (multi-bay for high power)
Key Features & Benefits
- Factory-assembled with ABB-coordinated components — main switch, fuses, du/dt filter, and output reactor — shipped as a single CE-marked unit with full IEC 61800-5-1 compliance documentation, eliminating field wiring responsibility for panel builders.
- Direct Torque Control (DTC) algorithm computes motor flux and torque 40,000 times per second, delivering torque response under 2 ms and ±1% torque accuracy without encoder feedback — essential for precise compressor and pump control in petrochemical applications.
- Integrated du/dt output filter limits motor terminal dV/dt to below 500 V/μs, protecting motor winding insulation on cable runs up to 300 m — a critical feature in Saudi Arabia's large pump stations where motor rooms are far from the electrical building.
- IP54 enclosure option operates at ambient temperatures up to 40°C continuous without derating, accepting short-term peaks to 50°C, covering the harsh conditions of electrical rooms across Saudi Arabia's industrial facilities.
- ABB factory acceptance testing (FAT) performed on every cabinet before dispatch, with witnessed FAT option for ARAMCO and SABIC projects, delivering a complete indexed wiring documentation set that reduces site commissioning time by 30–50%.
- 150% overload capacity for 60 seconds and 180% for 2 seconds protects against load spikes on conveyor startups, crusher inrush, and pump cavitation events without nuisance tripping in continuous process operation.
- Compatible with ABB Ability Condition Monitoring platform via built-in PROFINET/EtherNet/IP, enabling real-time drive health data reporting to plant DCS and cloud analytics dashboards for predictive maintenance scheduling.
Industrial Applications in Saudi Arabia
- High-pressure seawater reverse osmosis (SWRO) pump drives at SWCC and MARAFIQ desalination plants, where the ACS880-07's reliability under 24/7 continuous operation and resistance to coastal humidity meet the stringent uptime requirements of Saudi Arabia's water security infrastructure.
- Centrifugal compressor variable speed drives at SABIC and SADAF petrochemical plants in Jubail Industrial City, where DTC torque accuracy eliminates compressor surge risk during load transients and start-up sequences.
- Crude oil transfer and injection pump drives at Saudi Aramco upstream facilities in the Eastern Province, where the cabinet drive's integrated FAT documentation satisfies SAES-E-036 and ARAMCO project specification requirements.
- District cooling chilled water pump drives for large mixed-use developments and giga-projects, where energy efficiency under variable load conditions reduces cooling plant operating costs by 35–50% versus fixed-speed alternatives.
- Utility air compressor and blower drives at industrial cities (Jubail, Yanbu, Sudair), where the ACS880-07's SIL 3-capable safety functions meet the process safety requirements of IEC 61511 functional safety programs.
- Main drive systems for cement mill fans and kiln ID fans at Saudi Cement and YACCO plants across the Kingdom, where the high overload capacity handles the wide load swings characteristic of grinding circuit operation.
- Multi-pump booster station drives for Vision 2030 infrastructure projects including NEOM's water distribution network, where ABB Ability cloud monitoring enables remote diagnostics and planned maintenance across geographically distributed pump sites.
Industrial Supplier in Saudi Arabia
Get a Quote for the ABB ACS880-07 Cabinet-Mounted Drive
We respond within 4 business hours. Send model ACS880-07-0145A-3 for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — ACS880-07-0145A-3
Common questions from buyers in Saudi Arabia and the GCC