abb
ABB ACS880-17 Regenerative Drive
Model: ACS880-17-0060A-5
4-hour response · Pricing in SAR · Delivery across all KSA regions
ACS880-17-0060A-5 — ABB ACS880-17 Regenerative Drive
The ABB ACS880-17 Regenerative Drive is a four-quadrant active front-end (AFE) unit that returns braking energy from decelerating loads back to the AC supply network, instead of burning it as heat in resistor banks. Used as the supply-side module in an ACS880 multidrive system, the ACS880-17 replaces the standard diode rectifier with a fully controlled IGBT active infeed, producing sinusoidal input current with total harmonic distortion below 5% THDi and an input power factor of approximately unity (cos φ ≥ 0.99). Available in power ratings from 11 kW to 5.6 MW on 380–690 V AC, the ACS880-17 is the solution of choice when energy recovery, harmonic compliance, and generator-friendly operation are all required from a single hardware module.
The technical differentiation of the ACS880-17 rests on its active harmonic filtering capability. On large industrial sites with multiple drive systems, harmonic distortion from standard diode-front-end drives can violate IEEE 519 and IEC 61000-3-12 limits, creating power quality problems that damage sensitive instrumentation, cause metering errors, and trigger utility penalties under Saudi Electricity Company (SEC) reactive and harmonic tariff provisions. The ACS880-17 injects compensating current to maintain <5% THDi regardless of load level, eliminating the need for passive harmonic filters that are expensive, heavy, and frequency-sensitive. In generator-fed installations — common in Saudi Arabia's remote facilities and during ARAMCO turnarounds — the unity power factor input prevents generator oversizing, typically reducing generator capacity requirements by 15–20%.
In Saudi Arabia's industrial and port infrastructure, the ACS880-17 regenerative drive is specified for overhead crane and gantry crane drives at King Abdulaziz Port (Dammam), King Abdullah Port (Rabigh), and Yanbu Industrial Port, where frequent heavy-load lowering cycles make energy recovery financially significant. Automated storage and retrieval systems (AS/RS) at ARAMCO warehouse facilities and SABIC logistics centres use ACS880-17 for vertical lift module drives. Heavy-duty test rigs and dynamometer systems at Saudi Aramco's Research and Development Centre and KACST facilities specify the ACS880-17 for its ability to absorb full regenerative power continuously. The drive's IEC 61800-5-1 compliance and SIL 3-rated safety functions satisfy the functional safety requirements of Saudi Aramco's SAES-B-058 and related electrical safety standards.
Razz Middle East provides full technical consultation for ACS880-17 multidrive system design, covering AFE sizing, common DC bus architecture, harmonic compliance calculations to IEEE 519, and commissioning services across Saudi Arabia. We quote in SAR with delivery to Riyadh, Jeddah, Dammam, Al Khobar, Jubail, and Yanbu, and our drive engineers provide IQ/OQ/PQ validation documentation for pharmaceutical and critical infrastructure clients.
Technical Specifications
Full specifications for the ACS880-17-0060A-5
- Power Range
- 11–5600 kW
- Voltage
- 380–690 V AC
- Front End
- Active IGBT rectifier (regenerative)
- Input THDi
- <5% at rated load
- Input Power Factor
- cos φ ≥ 0.99
- Control
- Direct Torque Control (DTC)
- Communication
- PROFIBUS, EtherNet/IP, Modbus RTU/TCP
- Safety
- SIL 3 / PLe (STO)
- Enclosure
- IP21 / IP42 (cabinet version)
- Certification
- CE, IEC 61800-5-1
Key Features & Benefits
- Active IGBT front end returns braking energy to the AC supply network during deceleration, reducing net energy consumption by 20–40% in applications with frequent high-inertia braking cycles such as cranes, hoists, and test rigs.
- Sinusoidal input current with THDi below 5% at all load levels satisfies IEEE 519, IEC 61000-3-12, and SEC power quality requirements without additional passive harmonic filter hardware, which is expensive and frequency-dependent.
- Unity input power factor (cos φ ≥ 0.99) eliminates reactive power import from the supply, preventing reactive tariff penalties under Saudi Electricity Company billing provisions and reducing generator sizing requirements by 15–20% in isolated power systems.
- Four-quadrant operation enables motoring and full regenerative braking in a single module, with smooth torque reversal controlled by DTC at response times under 2 ms — essential for crane lowering speed control and dynamometer load absorption.
- Generator-friendly operation with low harmonic injection and unity power factor allows direct connection to diesel or gas generator sets at remote Saudi Arabian sites without derating the generator for harmonic and reactive loading.
- SIL 3 / PLe certified Safe Torque Off (STO) and Safe Stop 1 (SS1) functions, combined with the ACS880 output inverter module, satisfy IEC 62061 functional safety requirements for crane and hoist safety circuits.
- Compatible with ABB Ability Condition Monitoring and common DC bus multidrive architecture, where regenerative energy from one drive axis is directly consumed by a motoring axis, maximizing internal energy reuse before grid return.
Industrial Applications in Saudi Arabia
- Overhead crane and gantry crane drives at King Abdulaziz Port Dammam, King Abdullah Port Rabigh, and Yanbu Industrial Port, where heavy container lowering cycles generate significant regenerative energy that is returned to the port power network.
- Automated storage and retrieval (AS/RS) vertical lift module drives at ARAMCO warehouse facilities and SABIC logistics distribution centres, where high-frequency vertical cycles make energy recovery from deceleration economically significant.
- Dynamometer and engine test rig drives at Saudi Aramco R&D Centre and KACST research facilities, where the ACS880-17 absorbs full rated regenerative power continuously as the device under test drives the dynamometer.
- Multi-motor hoisting and lowering machinery at Hadeed and Ma'aden mineral processing facilities, where coordinated four-quadrant operation across multiple drive axes reduces peak demand on the facility supply transformer.
- Elevator machine room drives in high-rise commercial and residential towers across Riyadh and Jeddah, where regenerative operation during cabin descent reduces overall building energy consumption and supports LEED energy credits.
- Water treatment centrifuge drives where motor regeneration during centrifuge spin-down recovers kinetic energy stored in the rotating drum, reducing net energy cost per treatment cycle.
- Large fan and compressor test stand drives at ARAMCO's Dhahran engineering centre, where the variable load absorption profile of the ACS880-17 simulates real compressor performance curves for equipment qualification testing.
Industrial Supplier in Saudi Arabia
Get a Quote for the ABB ACS880-17 Regenerative Drive
We respond within 4 business hours. Send model ACS880-17-0060A-5 for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — ACS880-17-0060A-5
Common questions from buyers in Saudi Arabia and the GCC