Phoenix Contact CLIPLINE UK 10N Power Terminal Block

The Phoenix Contact CLIPLINE UK 10N is a 10 mm² screw-clamp power terminal block rated at 76 A / 1000 V AC to IEC 60947-7-1, accepting conductors from 1.5 mm² to 16 mm² and designed for the power-wiring tier of industrial panel builds — motor power feeds, transformer secondary terminals, bus-tie connections, and large-gauge control-power distribution in Saudi low-voltage switchgear assemblies. The UK 10N occupies the mid-power segment between instrument-grade 2.5 mm² terminals and heavy-bus 35 mm² power terminals, making it the standard choice for 3-phase 16 A–63 A motor starter power feed termination, 16 mm² incoming supply cable marshalling, and high-current 24 V DC bus rails in Saudi MCC and LCP (Local Control Panel) assemblies. Phoenix Contact's recessed screw-clamp design prevents accidental finger contact with the live screw when the conductor is absent — satisfying IEC 61439 IP2X finger-safe requirements for accessible live parts in assembled low-voltage switchgear.

The UK 10N uses Phoenix Contact's proven UK-N screw clamp body, which maintains consistent clamping force between 1.5 mm² and 16 mm² conductors through a large-area pressure plate rather than a single-point contact screw. This design prevents conductor strand damage under the full 16 mm² clamping force — a common failure mode in single-screw designs when 16 mm² stranded conductors are torqued against a pointed screw tip. The large pressure plate distributes the clamping force across the full width of the conductor cross-section, ensuring that the IEC 60947-7-1 pull-out force requirements are met without strand damage for the useful service life of the panel, typically 25–30 years in Saudi industrial applications. The UK 10N's 10 mm pitch is DIN-standard and allows free intermixing with UK 35N, UK 70N, and UK 6N terminals on the same rail section, providing a graded power terminal family from 6 mm² to 70 mm² without a rail-change requirement.

In Saudi panel fabrication, the UK 10N is the standard power terminal for motor control centre (MCC) panel internal wiring, substation auxiliary distribution boards, and building electrical main distribution boards across the Kingdom. Aramco operating facilities use UK 10N power terminals in their switchroom LV distribution boards and transformer secondary LV room panels throughout the Eastern Province — Dhahran, Abqaiq, Ras Tanura, and Juaymah — where they terminate the 16 mm² and 25 mm² secondary cables from dry-type transformers supplying auxiliary power at 380 V/220 V. SABIC Jubail power distribution centre expansion panels use UK 10N for the power infeed and outgoing feeder termination in their LV main distribution boards. Vision 2030 large commercial projects — Diriyah Gate Development Authority (DGDA) infrastructure panels, King Abdullah Economic City (KAEC) power distribution centres, and Amaala resort MEP panels — specify the CLIPLINE UK series for power-distribution board termination.

Razz Middle East maintains UK 10N stock in Riyadh and Jeddah for direct supply to panel builders, electrical contractors, and EPC procurement teams across the Kingdom. Our team provides UK-N series sizing guides covering UK 6N, UK 10N, UK 35N, and UK 70N for Saudi panel applications, torque specification sheets for ARAMCO panel-inspection compliance, and full CLIPLINE power-terminal cross-reference to ABB ENTRELEC, Weidmüller WDU, and Siemens equivalents. All UK 10N supplies carry Phoenix Contact CE declarations, IEC 60947-7-1 test reports, and SASO customs conformity documentation.