WEG W21 182T 3HP 2-Pole TEFC Motor 460V/60Hz

The WEG W21 182T 3HP 2-Pole TEFC Motor is a premium NEMA-frame induction motor engineered specifically for fractional and small industrial applications requiring 460V/60Hz or 380V/50Hz power supply. Manufactured to NEMA MG-1 standards and carrying UL/CSA certifications, this motor is the preferred choice for US EPC contractors and Saudi Aramco NEMA-specification projects across the GCC region.

The W21 motor line was designed by WEG to meet the demanding requirements of utility and auxiliary systems in North American and dual-specification markets. With a 3HP (2.24kW) output at 3600 RPM and NEMA 182T frame, this motor delivers reliable, efficient performance in the TEFC (Totally Enclosed Fan Cooled) configuration required by Saudi Aramco SAES-P-100 and SAES-E-017 specifications for outdoor and industrial installations.

Saudi Aramco Compliance and NEMA Specifications: Saudi Aramco operates both IEC and NEMA specification equipment across its vast network of oil fields, gas processing plants, refineries, and export terminals. Many of Aramco''s US-designed facilities and those constructed by US EPC contractors such as Bechtel, Fluor, Foster Wheeler, and KBR are specified to NEMA MG-1 standards. The W21 182T motor is used for instrument air compressors, lube oil pumps, and cooling water circulation pumps in smaller Aramco facilities and remote wellhead sites. The motor''s 3HP rating, NEMA 182T frame dimensions, and 460V/60Hz primary voltage align perfectly with Aramco''s North American-specification electrical systems.

460V/60Hz Dual Voltage Design: The W21 182T 3HP motor is wound for 460V/60Hz as standard (consistent with Saudi Aramco''s 460V 60Hz distribution in NEMA-specified facilities) with 380V/50Hz capability for Saudi Electricity Company (SEC) grid installations and standard GCC industrial applications. Full load current is 11.0A at 460V/60Hz and 13.3A at 380V/50Hz. This dual-voltage capability eliminates the need to stock separate motor variants for different facility specifications—a significant inventory advantage for industrial distributors and plant maintenance teams.

TEFC Enclosure for Gulf Industrial Conditions: The Totally Enclosed Fan Cooled (TEFC) enclosure provides IP55 protection as standard, with IP65 available on request. TEFC construction is mandatory under Saudi Aramco SAES-E-017 for motors installed in areas subject to dust, moisture, or corrosive atmospheres—conditions prevalent throughout Aramco''s facilities in the Eastern Province, Rub'' al-Khali desert operations, and coastal installations near the Arabian Gulf. The W21 frame features reinforced shaft seals and a drip cover on the external cooling fan to prevent ingress of windblown sand—a critical requirement for reliable operation during Saudi Arabia''s frequent shamal dust storms.

Premium Efficiency and Energy Performance: The W21 182T 3HP motor achieves a nominal efficiency of 87.5% at full load, meeting or exceeding NEMA Premium Efficiency (NEMA MG-1 Table 12-12) requirements. At Saudi industrial electricity tariffs, this efficiency rating translates to substantial lifetime energy cost savings versus standard efficiency motors. For continuous-duty applications running 8,000 hours per year, upgrading to NEMA Premium efficiency provides ROI within 12–24 months in most Saudi industrial scenarios.

The power factor of 0.82 at full load reduces reactive power demand, helping industrial facilities avoid the reactive power charges imposed by Saudi Electricity Company for facilities with power factor below 0.85. Many large Saudi industrial plants operate capacitor bank correction systems, and the W21''s favorable power factor characteristic reduces the capacitor bank rating required.

Mechanical Design and Construction: The NEMA 182T frame dimensions conform precisely to NEMA MG-1 Part 4 mounting standards, ensuring direct drop-in replacement capability for existing NEMA-frame installations. The cast iron frame construction provides superior vibration damping compared to aluminum frames, critical for pump and compressor drive applications where base resonance can accelerate bearing wear. The shaft is machined from carbon steel to NEMA dimensions with a keyed shaft extension, compatible with standard NEMA couplings, sheaves, and sprockets used throughout Gulf industrial installations.

Bearings are selected from premium manufacturers (SKF or FAG) with L10 rated life exceeding 30,000 hours under normal operating conditions. The grease-lubricated bearings include grease fittings and relief plugs for in-service relubrication without motor shutdown—a critical feature for continuous-process facilities. Bearing temperature and vibration can be monitored through optional PT100 RTD sensors and accelerometer mounting pads available as factory-fitted options.

Insulation and Thermal Performance: Class F insulation (155°C thermal rating) with Class B temperature rise (80°C above 40°C ambient) provides a substantial thermal safety margin for Saudi Arabia''s high ambient temperatures. The W21''s winding uses corona-resistant magnet wire with vacuum pressure impregnation (VPI) to achieve superior moisture and chemical resistance—essential for coastal facilities near the Arabian Gulf and petrochemical environments where aggressive vapors are present.

The motor is rated for continuous duty (S1) at 40°C ambient as standard, with high-ambient options available for 50°C and 55°C ambient installations. Altitude derating begins above 1000m ASL; for installations at Saudi Arabia''s elevated inland sites, the motor can be selected with appropriate service factor.

VFD Compatibility and Inverter-Ready Design: The W21 182T motor is fully inverter-rated and compatible with all major variable frequency drive brands including WEG CFW500, CFW700, CFW11, ABB ACS880, Siemens SINAMICS G120, and Allen-Bradley PowerFlex series—all of which are commonly deployed in Saudi Aramco and SABIC facilities. The enhanced insulation system withstands the voltage spikes and dV/dt stresses produced by modern PWM inverters, eliminating the need for output line reactors in most installation configurations.

Supply and Support from Razz Middle East: Razz Middle East maintains stock of WEG W21 NEMA-frame motors in Riyadh and Dammam, with rapid delivery capability to any location in Saudi Arabia. Our technical team provides application engineering support, motor sizing calculations, VFD compatibility verification, and Aramco documentation package preparation including material test reports, dimensional drawings, and ITP (Inspection and Test Plan) compliance documentation. Contact our sales team for competitive pricing, lead time confirmation, and project-specific technical support.