siemens
Siemens SICAM A8000 Substation RTU & Energy Management
Model: 6MF2101-0BA50-1CA1
4-hour response · Pricing in SAR · Delivery across all KSA regions
6MF2101-0BA50-1CA1 — Siemens SICAM A8000 Substation RTU & Energy Management
The Siemens SICAM A8000 is the modular remote terminal unit (RTU) and substation automation controller for Saudi Arabia's electrical distribution network substations, industrial substations, and renewable energy facilities — the intelligent multi-protocol communications gateway and data concentrator that connects substation primary data (from SIPROTEC IEDs, power meters, and protection relays) to control centre SCADA systems over all standard utility communication protocols. The SICAM A8000 supports IEC 60870-5-101/104, IEC 61850 MMS/GOOSE, DNP3, Modbus RTU/TCP, and ICCP, enabling seamless data transfer from IEC 61850 digital substations to SEC's legacy and modern energy management systems.
For Saudi Energy Management System (EMS) and SCADA modernisation projects, the SICAM A8000's built-in IEC 61850 server and client capabilities provide the protocol translation layer between new SIPROTEC 5 IEDs communicating in IEC 61850 and older SCADA systems communicating in IEC 60870-5-101/104. This protocol gateway function enables SEC's ongoing substation automation modernisation programme to upgrade field protection IEDs to modern IEC 61850 devices while retaining existing SCADA infrastructure — a cost-effective phased modernisation approach. The SICAM A8000's redundant CPU and power supply modules, along with a mean time between failures (MTBF) exceeding 100,000 hours, satisfy SEC's reliability requirements for SCADA gateway equipment at critical 380/220 kV primary substation nodes.
In Saudi Arabia, SICAM A8000 units are deployed at SEC transmission and distribution substations as the primary SCADA RTU, at ARAMCO industrial substations for demand management integration, and at utility-scale solar and wind installations for metering, protection IED data concentration, and SCADA reporting to the grid operator. The SICAM A8000's IEC 62443 cybersecurity compliance satisfies the NCA (National Cybersecurity Authority) requirements for operational technology cybersecurity in Saudi critical infrastructure facilities.
Razz Middle East supplies SICAM A8000 with protocol configuration, IEC 61850 ICD/SCD engineering, and SIPROTEC 5 integration support for Saudi substation automation projects.
Technical Specifications
Full specifications for the 6MF2101-0BA50-1CA1
- Protocols
- IEC 60870-5-101/104, IEC 61850 MMS/GOOSE, DNP3, Modbus RTU/TCP, ICCP
- Redundancy
- Redundant CPU and power supply modules
- MTBF
- >100,000 hours
- I/O Modules
- Binary, analogue, counter, transformer inputs
- Communication
- Ethernet, serial, optical fibre
- Cybersecurity
- IEC 62443-3-3 compliant
- Time Sync
- IEEE 1588 PTP, GPS, IRIG-B
- Housing
- 19" rack or DIN rail
Key Features & Benefits
- Multi-protocol gateway supporting IEC 60870-5-101/104, IEC 61850, DNP3, and Modbus simultaneously provides the protocol translation layer for Saudi SCADA modernisation projects bridging IEC 61850 IEDs with legacy EMS systems.
- IEC 61850 server and client capabilities enable bidirectional IEC 61850 communication with SIPROTEC 5 and third-party IEDs, providing full process data access without additional IEC 61850 middleware.
- Redundant CPU and power supply modules with MTBF exceeding 100,000 hours satisfy SEC reliability requirements for SCADA RTU equipment at critical transmission substation nodes.
- IEC 62443 cybersecurity compliance meets NCA (National Cybersecurity Authority) operational technology security requirements for Saudi critical electrical infrastructure SCADA systems.
- IEEE 1588 PTP, GPS, and IRIG-B time synchronisation options provide sub-microsecond timestamping accuracy for fault recording and sequence-of-events data in SEC and ARAMCO substation applications.
- Modular I/O architecture with binary, analogue, counter, and transformer input modules covers all substation I/O types in a scalable chassis from small distribution substations to large 380 kV primary substation nodes.
- IEC 61968/61970 CIM data model support enables direct integration with SEC's Energy Management System (EMS) and Asset Management System (AMS) platforms without additional data mapping middleware.
Industrial Applications in Saudi Arabia
- SEC 380/220/110/33 kV primary substation SCADA RTU, providing IEC 60870-5-104 communication to SEC's Energy Management Centre and IEC 61850 gateway to SIPROTEC 5 protection IEDs.
- ARAMCO industrial substation demand management RTU, providing real-time power data to ARAMCO's energy management system for demand response and load shedding coordination.
- Utility-scale solar PV plant SCADA and protection data concentrator, providing IEC 60870-5-104 reporting to the grid operator with Modbus collection from string inverters and protection IEDs.
- SEC substation automation modernisation gateway, translating new IEC 61850 SIPROTEC 5 IEDs to SEC's legacy IEC 60870-5-101 telecontrol infrastructure during phased SCADA modernisation.
- SWCC desalination plant substation RTU for power management system integration, providing real-time electrical data from 115 kV and 13.8 kV switchgear to the plant DCS.
- NEOM grid management system substation controller, providing the IEC 61850 and IEC 61968 data gateway from substation protection layer to NEOM's smart grid energy management platform.
- Independent power producer (IPP) substation SCADA RTU for grid operator reporting, satisfying SEC's mandatory protection relay data and energy metering telemetry requirements for IPP grid connection.
Industrial Supplier in Saudi Arabia
Get a Quote for the Siemens SICAM A8000 Substation RTU & Energy Management
We respond within 4 business hours. Send model 6MF2101-0BA50-1CA1 for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — 6MF2101-0BA50-1CA1
Common questions from buyers in Saudi Arabia and the GCC