3M 8100-YS 3M Electrical and Industrial Consumables

Razz Middle East supplies 3M electrical and industrial consumables in Saudi Arabia. The catalogue covers insulating and splicing tapes, cable jointing and termination materials, connectors and lugs, abrasives, adhesives and personal protective equipment. Items are ordered by the 3M product code printed on the box and are sourced to order, delivered duty-paid to site.

3M 8100-YS

This page covers 3M part number 8100-YS — 3M Electrical and Industrial Consumables. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About 3M Electrical and Industrial Consumables

This is a consumables catalogue rather than a single family, and it is bought by the box for a job. The electrical side is the part most plants order: vinyl insulating tapes in several thicknesses and temperature grades, self-amalgamating rubber and mastic tapes that build a moisture seal on a joint, glass cloth and friction tapes, and cold-shrink and heat-shrink tubes, joints and terminations for low- and medium-voltage cable ends. Alongside them sit insulation putties and sealants, cable markers, compression connectors and the tools that crimp them. The industrial side covers abrasive discs, belts and non-woven pads for surface preparation and weld dressing, adhesives, and masking and packaging tapes. Safety products include respirators, filters, hearing protection and eyewear. Each product code identifies a specific size, width, length and grade, and codes differing by a suffix are usually different pack sizes of the same material.

3M Electrical and Industrial Consumables in Saudi Arabia

Saudi conditions decide which grade of these consumables actually survives. Cable joints and terminations made outdoors in Jubail, Yanbu or on a Red Sea coastal site face heat, ultraviolet exposure, salt and blown sand, so tape and jointing systems must be selected for operating temperature and outdoor use, not picked off the shelf. Cable pulling and jointing on SEC distribution networks, in substations inside Aramco, SABIC and Ma'aden plants, and on construction at NEOM and the Red Sea coast consumes these materials in volume. Abrasives and adhesives go to fabrication and maintenance workshops, and respiratory and hearing protection to cement, mining and petrochemical sites. Materials imported into the Kingdom are subject to SASO conformity requirements, and shelf life should be checked on adhesives and tapes stored in a hot warehouse.

Ordering and lead time

Quote the 3M product code as printed on the carton, and state the pack size you want: the same material is sold in different widths, lengths and case quantities under related codes, and the difference between one roll and a case of thirty-six is a suffix. For tapes, confirm the width, the thickness or grade and the temperature rating the application needs. For a cable joint or termination kit, state the cable voltage class, the conductor cross-section and whether the cable is armoured, since kits are sized to a conductor range. For abrasives, state the disc or belt size, the grit and the backing. For respiratory protection, state the filter class. Items are sourced to order, normally about three weeks from confirmation, delivered duty-paid to site.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.