ABB 3KXG758003U0400 ABB Switch-Disconnector Accessories

Razz Middle East supplies ABB switch-disconnector accessories in Saudi Arabia, sourced to order against the catalogue reference. These are the parts that complete an isolator rather than replace it: operating handles, extension shafts, auxiliary contacts, terminal shrouds and padlocking kits. They are ordered separately from the switch itself, quoted per part number and delivered duty-paid, with a typical lead time of three weeks.

ABB 3KXG758003U0400

This page covers ABB part number 3KXG758003U0400 — ABB Switch-Disconnector Accessories. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About ABB Switch-Disconnector Accessories

A switch-disconnector is usually sold as a bare switch body, and the accessories decide how it is actually installed. The operating handle is the most visible of them: black handles are used for general switching duty, while red handles on a yellow plate are used where the device serves as an emergency switching or main isolating device, so the colour is a functional statement rather than a finish option. Handles are supplied either for direct mounting on the switch or for door mounting, in which case an extension shaft transmits the movement from the door to the switch body inside the panel and has to be selected to the panel depth.

The remaining accessories serve the circuit around the switch. Auxiliary contacts report the open or closed position to a control system or interlock. Terminal shrouds and phase barriers restore the degree of protection against direct contact once cable lugs are fitted. Padlocking kits allow the handle to be locked in the open position, which is what makes the device usable under a lock-out procedure.

ABB Switch-Disconnector Accessories in Saudi Arabia

Accessories are what make an isolator acceptable under a Saudi plant's permit-to-work system. Aramco, SABIC and Ma'aden maintenance procedures depend on a lockable isolating point in sight of the machine, so padlocking kits and correctly coloured handles are specified rather than assumed. Door-mounted handles with extension shafts are standard on motor control centre cubicles and pump-house panels in Jubail, Yanbu and at desalination sites, where the switch has to be operated without opening a live panel. Auxiliary contacts feed the interlocks that stop a remote PLC from starting a pump whose local isolator is open, a common arrangement on well fields and lift stations. Outdoors, terminal shrouds also keep blown sand off exposed connections. Panels here run on a 380/400 V, 60 Hz supply, and assemblies imported for regulated projects are subject to SASO conformity.

Ordering and lead time

Quote the accessory reference in full — 3KXG758003U0400 and 3KXG801026U0100 are separate items — and tell us which switch-disconnector it has to fit. Accessories are frame-specific: a handle or shaft made for one frame size will not engage the mechanism of another, and an auxiliary contact block is matched to the switch family rather than being universal. For a door-mounted arrangement, give the depth from the door to the mounting plate so the extension shaft length can be confirmed. For a padlocking kit, say how many padlocks the site procedure requires. If you are retrofitting to an installed switch, send the switch's own 1SCA reference together with a photograph of the operating mechanism. Sourced to order, typical lead time three weeks, delivered duty-paid.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.