Aventics 0822334505 Aventics Pneumatic Valves and Actuators

Razz Middle East supplies Aventics pneumatic components in Saudi Arabia. Aventics is the former Rexroth Pneumatics business, now part of Emerson, and its solenoid valves, valve manifolds, cylinders and air preparation units remain fitted across machinery built in Europe. Orders are placed against the ten-digit Aventics order number, sourced to order and delivered duty-paid to your site, normally within about three weeks.

Aventics 0822334505

This page covers Aventics part number 0822334505 — Aventics Pneumatic Valves and Actuators. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Aventics Pneumatic Valves and Actuators

Aventics covers the compressed-air side of a machine. Directional control valves are the core: 3/2, 5/2 and 5/3 solenoid and pilot-operated spool valves supplied as single valves or built onto manifold bases, with electrical connection by individual plug, multipole cable or a fieldbus valve island. Actuators run from small round-body and short-stroke cylinders through ISO 15552 profile and tie-rod cylinders to rodless, guided and rotary units, with magnetic pistons for reed and electronic position sensors. Air preparation is the AS series of filters, regulators, lubricators, soft-start and dump valves and shut-off valves, sized by port and flow. Around these sit fittings, tubing, silencers, pressure switches and seal kits. The naming is the awkward part. Aventics carries plain ten-digit numeric order numbers such as 0820023026, 0822010501 and 8941000302, inherited from Rexroth Pneumatics, that read as nothing at all. The digits are catalogue keys rather than a description, so only the full number identifies the valve function, port size, coil voltage and connector, and two numbers that differ in the last two digits can be different coil variants of the same body.

Aventics Pneumatic Valves and Actuators in Saudi Arabia

Aventics valves and cylinders come into the Kingdom fitted to imported machinery. Bottling, filling and secondary packaging lines in food and beverage plants use them heavily, as do plastics and converting machinery, printing and label lines, and bagging and palletising equipment at cement and fertiliser plants. Skid-mounted packages delivered into Jubail and Yanbu petrochemical units often carry Aventics air preparation and valve islands in their control cabinets. Two things shorten component life here. High ambient temperature raises the dew point of the compressed air, so water carry-over into valves and cylinders is a common failure mode unless dryer and filtration are kept up. Fine dust reaches rod seals and filter elements on outdoor and semi-enclosed plant. Solenoid coils on Saudi sites are usually 24 V DC from the machine panel, with 110 V and 230 V AC variants also in service, and mains supply is 380/400 V at 60 Hz. Imported items are subject to SASO conformity requirements.

Ordering and lead time

Send the ten-digit order number. Nothing else identifies an Aventics part reliably, because the label often shows only that number and a bar code, and valves that are physically identical differ by coil voltage, electrical connector and pilot arrangement. If the label is gone, photograph the valve on the manifold including the coil and connector, the port markings and the manifold end plates, and tell us the control voltage and the machine make and model. For a manifold, count the stations and note which are blanked. For cylinders, give the bore, the stroke and the mounting, and say whether magnetic position sensing is fitted. Where an original number has been superseded under Emerson we will confirm the current equivalent before quoting. Items are sourced to order and no stock is held in Saudi Arabia; the usual lead time is about three weeks, delivered duty-paid.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.