Camozzi A3311C2 Camozzi Pneumatic Components

Razz Middle East supplies Camozzi pneumatic components across Saudi Arabia. The range covers pneumatic cylinders in ISO and compact formats, solenoid and manual valves and valve islands, air preparation units combining filters, regulators and lubricators, push-in fittings and tubing, and proportional and flow control devices. Items are sourced to order against the exact Camozzi code and delivered duty-paid to site.

Camozzi A3311C2

This page covers Camozzi part number A3311C2 — Camozzi Pneumatic Components. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Camozzi Pneumatic Components

A pneumatic cylinder is specified by bore and stroke first, because bore sets the force available at a given pressure and stroke sets the movement, but the mounting style, rod thread, cushioning and magnetic piston option decide whether the replacement actually fits the machine. Cylinders built to the ISO interface standards can be exchanged between makers on the mounting dimensions, while compact and round-body types often cannot. A magnetic piston is required if position sensors are clamped to the barrel, and a cylinder ordered without it will leave those sensors dead. Valves are ordered by function as two-, three- or five-port with two or three positions, by port size, by actuation as solenoid, pilot or manual, and by coil voltage; five-port valves with different centre conditions behave differently when power is removed. Air preparation units are assembled from a filter, a regulator and optionally a lubricator with mounting brackets and gauges, and filter bowls and elements are consumable items ordered separately.

Camozzi Pneumatic Components in Saudi Arabia

Compressed air drives machine motion in nearly every Saudi production facility. Food and beverage, dairy and bottling plants around Riyadh, Jeddah and Al Kharj use cylinders and valve islands on filling, capping, labelling and case packing stations. Plastics processing uses them on mould gates, part ejection and material handling. Packaging, printing, woodworking and metal fabrication machines use the same components, and cement, mining and bulk handling installations use air on chute gates, dust valves and pneumatic conveying. Two local conditions determine how long these parts last. Compressed air quality is the recurring problem: high ambient temperature and coastal humidity load the dryer, and water or compressor oil carried through to a valve seat or cylinder seal is the usual cause of early failure. Ambient heat and ultraviolet exposure also degrade unprotected polyurethane tubing on outdoor runs, so tube material and routing should be reviewed on any external circuit.

Ordering and lead time

Quote the Camozzi code as printed on the component, for example MC202-D00 or A3311C2. For a cylinder, state bore, stroke, mounting style, rod thread, whether cushioning is required and whether a magnetic piston is needed for position sensing, since a replacement without the magnet will not trigger the existing sensors. For valves, give the port function and number of positions, the port thread size, the actuation type, the coil voltage and, for a manifold-mounted valve, the valve island or sub-base reference. For air preparation, state the port size, the required flow, the filtration grade and whether a lubricator is wanted, and order bowls and elements as separate consumable lines. Fittings need tube outside diameter, thread size and thread form. Items are sourced to order with a typical lead time of three weeks and delivered duty-paid to site.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.