Autonics MT4W-AA-41 Autonics Sensors and Control Devices

Razz Middle East supplies Autonics sensors and control devices across Saudi Arabia. The range covers incremental and absolute rotary encoders, photoelectric and inductive proximity sensors, temperature controllers and sensors, counters and timers, panel meters, and DIN-rail switch-mode power supplies. Items are sourced to order against the exact Autonics model code and delivered duty-paid to site.

Autonics MT4W-AA-41

This page covers Autonics part number MT4W-AA-41 — Autonics Sensors and Control Devices. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Autonics Sensors and Control Devices

The model codes here are positional and dense. An encoder reference such as E50S8-500-3-T-24 reads as the body diameter, the shaft diameter, the pulses per revolution, the output phase arrangement, the output circuit type and the supply voltage, and every one of those must match the machine: the pulse count sets the resolution the controller expects, the output type must suit the controller input as totem pole, open collector, line driver or voltage output, and the shaft and flange must fit the mechanical mounting. A totem pole output driven into an input expecting a line driver will work over a short cable and fail over a long one. Temperature controllers are ordered by panel cut-out size, input type as thermocouple or resistance temperature detector, output type as relay, voltage pulse for a solid state relay or analogue current, and the number of alarm outputs. Counters and timers are specified by cut-out, supply voltage, input speed and output arrangement. Power supplies are specified by output voltage and current.

Autonics Sensors and Control Devices in Saudi Arabia

These devices are fitted on production machinery and in control panels across the Kingdom. Rotary encoders provide length, position and speed feedback on cutting and slitting machines, packaging and printing lines, conveyors and winders in plastics, paper and food plants around Riyadh, Jeddah and the industrial cities. Temperature controllers run extruder barrel zones, heat sealing jaws, ovens, dryers and small process heating in food, plastics and general manufacturing. Counters and panel meters appear on batching and production count applications. Proximity and photoelectric sensors are consumed as routine machine spares. DIN-rail power supplies feed control circuits inside panels. Two local conditions matter: panel ambient temperature in summer is high, which shortens the life of a power supply loaded near its rating and makes derating and ventilation worth designing in, and dust and vibration on encoder installations at cement, mining and bulk handling sites make shaft coupling and cable strain relief the usual failure points.

Ordering and lead time

Quote the Autonics model code in full, for example E50S8-3600-3-T-24 or BR100-DDT, because every field carries specification and a shortened code will not resolve. For an encoder, confirm the body diameter, shaft diameter and mounting flange, the pulses per revolution, the output circuit type and the supply voltage, and state the cable length to the controller, since long runs usually require a line driver output. For temperature controllers, give the panel cut-out size, the sensor type, the output type as relay, voltage pulse or analogue, the number of alarms and the supply voltage. For power supplies, state output voltage, output current and whether DIN rail mounting is required. Sensor selection needs range, target material, output type and connection. Items are sourced to order with a typical lead time of three weeks and delivered duty-paid to site.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.