Hager
Hager Vega Distribution Board 12-Way Single Phase
Model: VZ112N
4-hour response · Pricing in SAR · Delivery across all KSA regions
Hager Vega Distribution Board 12-Way Single Phase
The Hager Vega VZ112N is a 12-way single-phase surface or flush-mount distribution board designed for residential and light-commercial applications. Built to IEC 61439-3 (DBO standard), the VZ112N provides a robust, aesthetically refined enclosure for up to 12 single-module MCBs or 6 RCBOs, with a dedicated main incoming connection compartment and pre-wired neutral bar. The board's high-impact ABS/PC housing in a modern white finish is resistant to UV degradation and surface cracking, which is important in Saudi Arabia's solar radiation environment where plastic enclosures are regularly exposed to high irradiance through glass facades or in partly shaded outdoor cabinets. The IP30 protection rating is suitable for indoor electrical rooms, while optional IP40 door seals are available for dusty environments.
The Vega distribution board range has become one of the most widely used panel enclosure systems in Saudi Arabia's residential and commercial fit-out sector. Its combination of European design quality, competitive pricing relative to European alternatives, SASO certification, and Hager's local distribution network — supported by Razz Middle East — gives it a strong market position across villa projects, apartment developments, and commercial office fit-out. Interior designers and architects working on NEOM's luxury residential precincts and boutique hotel rooms in the Red Sea Project appreciate the Vega's clean fascia design, which integrates more discreetly into premium interior spaces than the utilitarian appearance of many alternative distribution boards.
Electrical contractors in Saudi Arabia value the VZ112N's tool-free wiring access and pre-marked circuit numbering system, which accelerates panel wiring and reduces errors on site. The dedicated incoming terminal block, with sufficient termination capacity for up to 35 mm² cables, accommodates the larger incoming cable sizes typical of circuits serving Saudi villas and apartment units with high cooling loads. The flush-mount variant (VZ112NF) integrates cleanly into plastered walls in tiled bathrooms and finished corridors, while the surface-mount version is used in service rooms and electrical cupboards. Both variants use the same internal chassis and accessories, simplifying contractor procurement and site management.
Razz Middle East carries the complete Vega DB range from 4-way to 36-way in single and three-phase configurations, along with all accessories including blanking plates, busbar covers, DIN rail extensions, and neutral/earth bar kits. We can supply Vega boards pre-populated with customer-specified Volta MCBs or RCBOs, saving wiring time on site and ensuring factory-verified assembly quality. This service is particularly valuable for large-scale hospitality and residential projects in Mecca, Medina, and NEOM where hundreds of identical panels are required.
Technical Specifications
Full specifications for the VZ112N
- Number of Ways
- 12 single-module
- Phases
- Single phase (1P+N)
- Rated Current (Incoming)
- 100 A
- Enclosure Material
- ABS/PC, UV-stabilised
- Protection Rating
- IP30 (indoor)
- Mounting
- Surface or flush
- Standard
- IEC 61439-3 / SASO
- Incoming Cable Capacity
- Up to 35 mm²
Key Features & Benefits
- 12-way single-phase configuration accommodates up to 12 single-module MCBs or 6 twin-module RCBOs, covering all final circuits in a standard Saudi residential villa guest suite or hotel guest room.
- Pre-wired neutral and earth bars with individual circuit terminations reduce panel assembly time on site, supporting faster electrical completion schedules on large-scale hospitality and residential projects.
- UV-stabilised ABS/PC housing in modern white finish withstands Saudi Arabia's intense solar radiation and elevated ambient temperatures without yellowing, cracking, or surface degradation over the product's service life.
- Flush-mount installation option integrates cleanly into plastered or tiled walls in premium interior spaces, satisfying the aesthetic requirements of luxury hotel brands operating in Mecca, Medina, and NEOM precincts.
- Tool-free wiring access with clearly marked circuit numbering and colour-coded wiring guides reduces installation errors and aids subsequent maintenance and fault-finding by facilities teams.
- IEC 61439-3 and SASO certification confirms compliance with Saudi Building Code requirements for distribution board construction and labelling, supporting straightforward SEC connection approval.
Industrial Applications in Saudi Arabia
- Hotel guest room final distribution panels in luxury hotels across Mecca's Abraj Al-Bait development and Medina's Anwar Al-Madinah precinct, where compact 12-way boards accommodate all guest room circuits in a single flush-mounted enclosure.
- Villa sub-distribution panels in NEOM's Sindalah Island and Leyja resort residences, where the Vega's clean aesthetic integrates into the high-end interior finishes specified by NEOM's design consultants.
- Apartment unit distribution boards in Riyadh's mixed-use tower developments and Jeddah's North Obhur residential compounds, housing MCBs and RCBOs for all lighting, power, and air conditioning circuits.
- Commercial office tenant distribution boards in King Abdullah Financial District (KAFD) towers and Riyadh Business Gate, where 12-way capacity covers typical small-to-medium office suite circuit requirements.
- ARAMCO residential compound villa distribution upgrades in Dhahran, Ras Tanura, and Abqaiq, where standardisation on Hager Vega panels simplifies the ARAMCO maintenance team's spares holding and replacement panel stock.
Industrial Supplier in Saudi Arabia
Get a Quote for the Hager Vega Distribution Board 12-Way Single Phase
We respond within 4 business hours. Send model VZ112N for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — VZ112N
Common questions from buyers in Saudi Arabia and the GCC
What is the Hager Vega Distribution Board 12-Way Single Phase (VZ112N) and what is it used for?
The Hager Vega VZ112N is a 12-way single-phase surface or flush-mount distribution board designed for residential and light-commercial applications. Built to IEC 61439-3 (DBO standard), the VZ112N provides a robust, aesthetically refined enclosure for up to 12 single-module MCBs or 6 RCBOs, with a dedicated main incoming connection compartment and pre-wired neutral bar. The board's high-impact ABS/PC housing in a modern white finish is resistant to UV degradation and surface cracking, which is important in Saudi Arabia's solar radiation environment where plastic enclosures are regularly exposed to high irradiance through glass facades or in partly shaded outdoor cabinets. The IP30 protection rating is suitable for indoor electrical rooms, while optional IP40 door seals are available for dusty environments.
Where can I buy the Hager VZ112N in Saudi Arabia?
Razz Middle East supplies genuine Hager products including the Hager Vega Distribution Board 12-Way Single Phase (VZ112N) across all regions of Saudi Arabia — Riyadh, Jeddah, Dammam, Al Khobar, Jubail, Yanbu, Mecca, and Medina. We maintain local stock on fast-moving items and can source specialist configurations. Request a quote on this page for same-day pricing.
How do I get the best price for the VZ112N in KSA?
Click "Request Free Quote" on this page or message us the model number VZ112N on WhatsApp. Our technical sales team responds within 4 business hours with a competitive price in SAR, confirmed stock availability, and delivery lead time — with no hidden charges or handling fees.
Is Razz Middle East an authorized Hager supplier in Saudi Arabia?
Razz Middle East is a specialist industrial equipment supplier in Saudi Arabia focused on Hager and other leading global brands. We supply 100% genuine OEM products backed by full manufacturer warranty, serving the oil & gas, petrochemical, power generation, water, construction, and manufacturing sectors across the Kingdom.
What is the delivery lead time for the Hager Vega Distribution Board 12-Way Single Phase in Saudi Arabia?
In-stock items typically ship within 24-48 hours to Riyadh, Dammam, Jeddah, and the Eastern Province. Project orders and non-standard configurations generally take 2-6 weeks. Contact us with the exact model number VZ112N for a precise availability confirmation and delivery date.
Can the VZ112N be supplied for ARAMCO, SABIC, or NEOM projects in KSA?
Yes. Razz Middle East has experience supplying Hager equipment to major industrial projects and EPC contractors across Saudi Arabia. We can provide full technical documentation, Material Inspection Reports (MIR), and certificates of conformity to meet vendor approval requirements. Contact our project team to discuss your specific project requirements.