Invertek ODE-3-120070-1F12 Invertek Optidrive Variable Speed Drives

Razz Middle East supplies Invertek Optidrive variable speed drives across Saudi Arabia. The range covers compact AC inverters for three-phase induction motors on pump, fan, conveyor and general machine duty, in single-phase and three-phase input versions. Drives are sourced to order against the exact ODE model code and delivered duty-paid to site.

Invertek ODE-3-120070-1F12

This page covers Invertek part number ODE-3-120070-1F12 — Invertek Optidrive Variable Speed Drives. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Invertek Optidrive Variable Speed Drives

An Optidrive takes a fixed-frequency mains supply, rectifies it and re-creates a variable-voltage variable-frequency output so that a standard induction motor can run at any speed the process needs. The ODE-3 ordering code is read in fields: the numeric block after the family gives frame and current rating, and the following characters give the input phase arrangement, the enclosure style and whether an EMC filter is fitted. That last field matters, because a drive supplied without the internal filter will need an external one to meet emission limits on a shared supply. The drives carry the usual general-purpose feature set: V/f and vector control modes, ramp and skip-frequency settings, PID control for closed-loop pressure or flow, fire mode and pump-specific functions on the appropriate variants, and a keypad or software route for parameter setting. Sizing is by motor current rather than kilowatt label alone, since a drive matched only on nameplate power can still trip on a high-inertia or high-starting-torque load.

Invertek Optidrive Variable Speed Drives in Saudi Arabia

Variable speed control is used in the Kingdom mainly to cut energy on pumps and fans and to protect mechanical plant from direct-on-line starting. Water transmission and district pumping stations, building HVAC plant rooms, cooling tower and AHU fans, and irrigation and borehole pumps are the common duties. Food and beverage, plastics, packaging and woodworking plants in Riyadh, Jeddah and the industrial cities use them on conveyors, mixers and extruders. Construction projects including NEOM and Red Sea developments specify drives on ventilation and pressurisation systems. Two local conditions govern selection: the supply is 380/400 V at 60 Hz, so motor base frequency and drive output must be set accordingly, and ambient temperature inside panels routinely exceeds the drive's rated ambient, which requires either derating or forced panel cooling. Dust ingress at cement and mining sites makes enclosure rating and filter maintenance a real reliability factor.

Ordering and lead time

Quote the complete ODE model code exactly as it appears on the drive label, for example ODE-3-340240-3F42, because the digits carry frame, current rating, input phases and filter fitment and a shortened code cannot be matched. When replacing a drive, also send the motor nameplate: full-load current, voltage, frequency and connection. Sizing is done on motor current, and on high-torque loads a frame step up is often required. State whether the incoming supply is single-phase or three-phase, whether an internal EMC filter is needed, and whether the drive mounts inside a panel or in a standalone enclosure. Note any options required, such as a remote keypad, braking resistor or communication module, as these are separate references. Drives are sourced to order with a typical lead time of three weeks and delivered duty-paid to site.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.