Mean Well GST60A24-P1J MEAN WELL Switch-Mode Power Supplies

Razz Middle East supplies the MEAN WELL switch-mode power supply range in Saudi Arabia, sourced to order against the full model code. The range covers enclosed and open-frame AC-DC units, DIN-rail supplies, desktop and wall-plug adaptors, DC-DC converters, LED drivers, battery chargers and units built for harsh or railway duty. Each model is ordered by its complete code and delivered duty-paid, normally within three weeks.

Mean Well GST60A24-P1J

This page covers Mean Well part number GST60A24-P1J — MEAN WELL Switch-Mode Power Supplies. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About MEAN WELL Switch-Mode Power Supplies

A MEAN WELL code reads as series, power class, output voltage and then option letters. In HEP-320-24A the HEP series is the conformally coated harsh-environment family, 320 marks the wattage class, 24 the nominal output and the trailing A the adjustable output version. RSD-30G-12 is a railway DC-DC converter, 30 W class, with G marking the input window and 12 the output. SD-100A-5 is a DC-DC unit whose letter sets the input voltage range. GS15E-5P1J is an external adaptor where the trailing group defines the AC input plug and the DC output connector. The catalogue spans single-output units of a few watts up to multi-kilowatt rack and parallel-capable supplies, plus dual and triple output models, programmable and bidirectional units, and PFC and non-PFC input stages. Practical differences between neighbouring model codes include output trim, remote sense and remote on-off, active current sharing, conformal coating, terminal block versus flying leads, and the safety approvals the unit is built to. Published derating curves define how much output remains at high ambient temperature, which matters more here than in Europe.

MEAN WELL Switch-Mode Power Supplies in Saudi Arabia

MEAN WELL units sit inside a large share of the control panels built in the Kingdom. Panel builders and machine shops in Riyadh, Dammam and Jeddah use 24 V supplies to feed PLCs, sensors, relays and HMI screens. Telecom, CCTV and access-control installers use 12 V and 24 V units in cabinets and camera poles. LED lighting contractors on facade, tunnel, street and signage projects use constant-voltage and constant-current drivers, including outdoor-rated models. Water utilities and irrigation schemes use DIN-rail supplies in RTU and dosing cabinets, and solar and off-grid installers use DC-DC converters and chargers. Panel ambient temperature is the deciding factor in much of the country: a cabinet on a rooftop or in an unconditioned plant room in Jubail or Yanbu runs hot, so units are usually specified with headroom rather than at nameplate. Input is normally 220-240 V single phase or 380-400 V three phase at 60 Hz, and imported equipment must meet the applicable SASO conformity requirements.

Ordering and lead time

Quote the whole model code, including every trailing letter. LRS-350-24 and a coated or adjustable variant of the same wattage are different orders, and a suffix that looks cosmetic often marks a different terminal arrangement, a different plug, or a different approval set. Give the input supply you have, the output voltage and the continuous load, not the peak, and say whether the unit sits in a sealed cabinet, a ventilated panel or outdoors. Where several units feed one bus, say so, because parallel operation requires a model that supports it. Adaptors need the AC plug type for Saudi sockets and the DC connector that fits the equipment. Units are sourced to order and delivered duty-paid, with a normal lead time of three weeks; less common series and high-wattage models can take longer.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.