Looking for a Molex Distributor in Saudi Arabia?

Searching for a Molex distributor in Saudi Arabia usually means one thing: you need the right Molex parts, at a fair price, delivered to site. Razz Middle East supplies Molex products to industrial buyers across the Kingdom — send the part number and quantity, and we quote price and lead time, delivered duty-paid anywhere in Saudi Arabia.

Razz Middle East is an authentic Molex supplier in Saudi Arabia, supplying the Molex industrial connectivity portfolio — Brad M12 fieldbus connectors, Mini-Fit Jr power connectors, T90 circular connectors, Micro-Fit 3.0 board connectors and Molex industrial cable assemblies — to Saudi EPC panel builders, instrument engineers, DCS marshalling cabinet fabricators and maintenance teams across the Kingdom. Molex, founded in 1938 in Lisle, Illinois and now a wholly-owned subsidiary of Koch Industries, is one of the world's three largest connector manufacturers, with over 100,000 products covering electronic, industrial, automotive and medical connector applications.

The Molex Brad M12 circular connector family is the connector type referenced in Saudi Aramco engineering standard SAES-J-904 (Fieldbus for Process Control) for PROFIBUS DP and PROFINET fieldbus connections in Aramco process plant instrument networks. M12 connectors in 4-pin D-coded (PROFIBUS), 4-pin D-coded (Ethernet 100M), and 8-pin X-coded (Gigabit Ethernet) configurations are the standard physical interface for connecting field instruments, flow computers, motor starters and drives to Aramco's DCS and SIS fieldbus networks. Using the correct M12 IP67-rated connector is a specific Aramco field instrument engineering requirement, and the Brad M12 range from Molex is one of the named connector families that Aramco instrument engineers recognise and accept without alternative approval.

The Molex Mini-Fit Jr connector series (5557 housing, 5556 terminal, 5.08mm pitch, 2–24 circuit positions, up to 13A per circuit at 250V AC/DC) is the de-facto standard for DCS marshalling cabinet internal power wiring in Saudi process plants — connecting 24VDC control power from DIN-rail PSUs to I/O card power rails and HART multiplexer power connections. Razz Middle East supplies the Molex T90 industrial circular connector (ATEX Zone 2 rated, IP67, 7/12/19-pin configurations, rated to 250V and 16A) to order for Saudi field maintenance teams working on motor junction boxes and instrument distribution amplifiers in Zone 2 classified areas. Whether you are comparing Molex distributor quotations or sourcing a single replacement item, Razz Middle East responds within four working hours with SAR pricing, lead time and full documentation.

Molex connectivity products — Brad M12 fieldbus connectors, Mini-Fit Jr power connectors and T90 ATEX Zone 2 multi-pin connectors — are used throughout Saudi Aramco and SABIC process plant automation systems, DCS marshalling cabinets and field instrument connection applications.

Brad M12 industrial connectors are the de-facto standard for PROFIBUS DP (D-coded, 5-pin, B/A signal pairs) and PROFINET IO (D-coded Type 1, 4-pin, 100 Mbit/s) fieldbus connections in Saudi process automation. Saudi Aramco SAES-J-904 (Instrument Wiring) references M12 D-coded connectors as the approved connector type for PROFIBUS DP field device connections — including field transmitters, valve positioners, junction boxes and multi-variable transmitters connected to Aramco DCS field I/O stations. Because Saudi Aramco DCS field networks use PROFIBUS DP as the primary field device bus (Honeywell Experion, Emerson DeltaV and Yokogawa CENTUM VP all support PROFIBUS DP with M12 field connections), the installed base of Brad M12 connectors in active Aramco process units runs into hundreds of thousands of units — creating a continuous MRO demand for M12 replacement connectors, M12 cordsets and M12 field-installable connectors.

Molex Mini-Fit Jr (2-position through 24-position, 13A/250V, with dual-beam stamped contacts) is the most widely used 24VDC power connector in Saudi Aramco DCS marshalling cabinet power distribution — providing the blade terminal strip connections between the 24VDC power supply rails, the distributed fuse/relay cards and the individual instrument loop power feeds. Mini-Fit Jr's combination of high-insertion-force locking mechanism (preventing accidental disconnection in vibration-exposed cabinet environments), high contact density (up to 24 circuits in a single connector), and proven contact reliability in 24VDC signaling environments makes it the de-facto connector for Aramco DCS panel builders' in-cabinet power distribution wiring.

Molex T90 ATEX Zone 2 multi-pin circular connectors (7, 12 and 19-pin versions, IP67, IEC 60309 pin layout, ATEX II 3G EEx nA) are used for field instrument and valve positioner connections in Zone 2 classified areas on Saudi Aramco process plant — providing a single multi-function connector that carries both 24VDC power and HART/4-20mA signal in a single IP67 circular connector body, simplifying Zone 2 field wiring and reducing termination time compared to individual screw terminals.

Razz Middle East supplies to order Molex's most-requested Saudi items. Sourced to order: Brad M12 D-coded PROFIBUS connectors (male and female, straight and 90°, cable-end and panel-mount), Brad M12 D-coded PROFINET cordsets (0.5m, 1m, 2m, 5m PUR cable), Brad M12 A-coded and B-coded for I/O signal applications, Mini-Fit Jr 5557 receptacle housings (2-24 circuit) with 5556 crimp terminal contacts (18-22 AWG) and matching PCB-mount headers, and T90 ATEX Zone 2 connector bodies (7-pin and 12-pin) with individual contacts.

For Brad M12 X-coded (Cat6A Ethernet, 10 Gbit/s), Mini-Fit Jr tooling (MoFlex crimp tool 63811-3900), T90 19-pin, Molex industrial Ethernet and PCIE connector products, and project quantities of any item, we procure on short lead times. 4-hour RFQ response. T90 ATEX certificate (ATEX II 3G) and M12 IP67 IEC 61076-2-101 datasheets available with every supply.