Schneider Electric ABL6TS02G Phaseo DIN-Rail Power Supplies (ABL)

Razz Middle East supplies Schneider Electric Phaseo DIN-rail power supplies across Saudi Arabia — the ABL range converting AC mains to regulated low-voltage DC for the PLCs, relays and sensors inside a control panel. Every item is sourced to order against the reference you quote and delivered duty-paid to your site. Typical lead time is three weeks.

Schneider Electric ABL6TS02G

This page covers Schneider Electric part number ABL6TS02G — Phaseo DIN-Rail Power Supplies (ABL). Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Phaseo DIN-Rail Power Supplies (ABL)

Every control panel needs one of these somewhere, even though it is rarely the part anyone notices. An ABL reference converts incoming AC mains into a regulated DC output, most commonly 24 V, that feeds everything doing the actual control work — the PLC, relays, sensors, indicator lamps and communication equipment. Without it, nothing else in the panel runs.

ABL1 references are the compact, economy tier, sized for smaller panels with modest DC loads. ABL6 and ABL8 are higher-power supplies, and some carry redundancy modules or boost options that let two supplies share a DC bus so a single failure does not take the whole panel down — worth specifying on a circuit where an unplanned shutdown is expensive rather than merely inconvenient.

Output current decides whether a supply fits its panel, and it must be checked against the actual connected DC load rather than assumed from the panel's size.

Phaseo DIN-Rail Power Supplies (ABL) in Saudi Arabia

Heat is the practical issue with this family in Saudi conditions, much as it is on a drive: a switch-mode supply's usable output current derates as ambient temperature climbs, and the derating curve is published against a reference temperature that a control room in Riyadh or a field kiosk near Jubail routinely exceeds. A supply sized exactly to its nameplate rating for a hot, unconditioned panel room already runs closer to its thermal limit than the datasheet suggests.

Local practice is to oversize modestly rather than select to the calculated load exactly, which costs little at this component's price and buys real margin against a panel that sees 45–50 °C ambient for months. This family appears in essentially every industry Razz serves — water treatment, cement, food and beverage, petrochemical control rooms.

Ordering and lead time

Quote the full ABL reference from the unit label. Tell us the DC output voltage and current you need, and list what the supply has to feed — PLC, relays, sensors, HMI — so we can check the total connected load against the rating rather than the panel's overall size.

If the panel runs in a hot or unconditioned space, say so; we generally suggest sizing a step above the calculated load rather than exactly to it, since a supply at its limit in a hot room has little margin left. If the assembly needs a redundancy or boost module, quote that too. If replacing an existing unit, a photograph of the label is the fastest route to the right reference. Typical lead time is three weeks, and items are supplied to order and delivered duty-paid.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.