Unitronics URD-0008CH Unitronics All-in-One PLC and HMI Controllers

Razz Middle East supplies Unitronics programmable controllers and expansion modules in Saudi Arabia. The range combines a PLC, an operator panel and on-board I/O in a single panel-mounted unit, and covers the Vision V130 and V200 series, Samba compact controllers, and UID and UIA expansion modules. Units are sourced to order against the exact model code and delivered duty-paid to site.

Unitronics URD-0008CH

This page covers Unitronics part number URD-0008CH — Unitronics All-in-One PLC and HMI Controllers. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Unitronics All-in-One PLC and HMI Controllers

Unitronics builds all-in-one controllers: the logic processor, the operator interface and the first block of I/O share one housing and one programming environment. Vision V130 units carry a small monochrome display with function keys and are used on single machines and pump sets. V200 series items, such as V200-18-E3XB, are snap-in or expansion modules that sit behind a Vision panel and extend its digital, analogue and high-speed channels. Samba SP models are the compact end of the line, with a colour touch screen and a fixed I/O count. Beyond the controller, UID and UIA modules add remote I/O over an expansion bus; UID-0016R type codes describe digital points with relay outputs, while UIA types mix analogue inputs and outputs. Model codes encode display type, I/O configuration and communication ports, so two controllers from the same series number can differ in what they can actually connect to.

Unitronics All-in-One PLC and HMI Controllers in Saudi Arabia

Unitronics controllers appear on skid-built and OEM machinery in the Kingdom rather than in large process plants under a distributed control system. Typical duties are irrigation and borehole pump control, package water treatment and reverse-osmosis skids, fuel station and car wash equipment, bakery and dairy machines in food and beverage plants, and building services such as chiller sequencing and pressure-boosting sets. The combined controller and panel suits a small enclosure where a separate PLC, HMI and I/O rack would not fit and where one local operator screen is all the plant needs. Machine-side supply is 380/400 V three-phase at 60 Hz, with the controller itself fed from a 24 V DC supply, so panels built to a 50 Hz European specification usually need the motor and drive side reviewed rather than the controller. Panels installed in the Kingdom are subject to SASO conformity.

Ordering and lead time

Quote the full model code from the label on the back of the unit. In a code such as V130-33-T2 or UID-0016R, the digits after the series name fix the display, the I/O mix and the output type, and a controller ordered on the series name alone will often not match the machine it is replacing. Note whether the item is a base controller or a snap-in expansion module, since these share number ranges. Record the communication ports fitted, serial, Ethernet or CANbus, because add-on port modules are ordered separately. Application programs are not supplied with the hardware; a replacement arrives blank and needs the existing project downloaded to it. Items are sourced to order with a lead time of about three weeks, delivered duty-paid to site.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.