WEG W22 NEMA Premium Efficiency Motor 60HP 4P 364T

The WEG 06018ET3E364T-W22 is a 60HP (45kW) 4-pole three-phase squirrel-cage induction motor from WEG's W22 NEMA Premium Efficiency line, mounted on the 364T NEMA T-frame and rated for 1770 RPM at 60Hz on a 230/460V supply. WEG is Brazil's largest motor manufacturer and one of the world's leading producers of electric motors and motion-control equipment, supplying more than 135 countries. Razz Middle East stocks the 06018ET3E364T-W22 in Saudi Arabia for fast supply to oil & gas, water, mining, cement and giga-project clients with SAR pricing and a 4-hour RFQ response.

Technical Overview The 06018ET3E364T-W22 is built around a one-piece cast-iron frame that carries WEG's optimised W22 cooling geometry — a high-efficiency fan, ribbed housing and redesigned air-flow path that lower operating temperature and reduce audible noise compared with conventional NEMA motors. The stator uses premium electrical steel and a high slot-fill copper winding to cut I²R losses, giving the NEMA Premium efficiency rating of 95.0% at full load. Insulation is Class F (inverter-ready) with a conservative Class B temperature rise of 80 K, leaving thermal headroom for Saudi Arabia's high ambient temperatures. The IP55 TEFC enclosure and V-ring shaft sealing protect the windings against dust, washdown and humidity. A NEMA Design B torque curve provides high locked-rotor and breakdown torque for direct-on-line starting, and the dynamically balanced rotor keeps vibration within the W22's low-vibration specification.

Performance & Specifications Rated output is 60HP (45kW) at 1770 RPM with a full-load current of about 140.0A at 230V or 70.0A at 460V and a power factor near 0.84. The NEMA Premium efficiency of 95.0% meets or exceeds the NEMA MG-1 premium thresholds and the IEC 60034-30-1 IE3 class. A 1.15 service factor allows continuous 14% overload, and the motor is rated for continuous S1 duty from -20°C to +40°C ambient at up to 1000 metres altitude. Bearings are sealed and pre-lubricated for long maintenance intervals, and the frame is fully interchangeable to the NEMA 364T standard for drop-in replacement of legacy motors.

Applications in Saudi Arabia The 06018ET3E364T-W22 is specified across Saudi industry. In oil & gas it drives water-injection and transfer pumps at Saudi Aramco facilities in the Eastern Province, Abqaiq and Khurais, and at crude-handling terminals in Yanbu and Ras Tanura. In petrochemicals it powers process pumps, cooling-tower fans and extruders at SABIC and affiliated complexes in Jubail and Al-Jubail Industrial City. Water and utilities use it for high-lift and transmission pumping at SWCC and National Water Company stations around Riyadh, Dammam, Jeddah and Al-Ahsa. MAADEN mining and minerals operations apply it to crushers, mills and conveyor drives at Ras Al-Khair and Al-Jalamid, and the cement sector uses it on kiln fans, raw mills and packing lines. The NEOM, Red Sea and Qiddiya giga-projects deploy it across HVAC, water and infrastructure plant. Its premium efficiency directly supports the Saudi Energy Efficiency Center (SEEC) motor standards and the Kingdom's Vision 2030 industrial-energy targets.

Why Choose Razz Middle East for WEG Products Razz Middle East supplies genuine WEG W22 motors from local stock in Saudi Arabia, with no grey imports — every 06018ET3E364T-W22 ships with WEG test certificates, conformity declarations and SASO import documentation. We respond to RFQs within 4 working hours with SAR-denominated pricing and deliver Kingdom-wide to Riyadh, Dammam, Al Khobar, Jubail, Yanbu, Jeddah, Al-Ahsa and NEOM. Our in-kingdom engineering team supports motor selection, frame and efficiency sizing, VFD compatibility and after-sales service, so EPC contractors and end users get the right motor, documented and delivered on schedule.