WEG CFW11 VSD CFW110010T4ON1Z 5HP 10.0A 380-480V

The WEG CFW110010T4ON1Z is a CFW11 variable-speed drive rated at 10.0A continuous output, controlling three-phase induction motors up to 5HP (3.7kW) on a 380-480V 3-Phase supply. WEG is a global leader in motors and drives, and the CFW11 family is widely deployed for pump, fan, compressor and conveyor control across Saudi industry. Razz Middle East stocks the CFW110010T4ON1Z in Saudi Arabia with SAR pricing and a 4-hour RFQ response.

Technical Overview The CFW110010T4ON1Z uses WEG's vector-control platform to deliver scalar V/f, quadratic V/f, WEG's VVW flux control and full sensorless-vector control for tight speed and torque regulation without an encoder. A high-frequency IGBT output stage provides 0-500Hz operation, and the drive carries a complete protection suite — over-current, over/under-voltage, motor overload (I²t), earth fault, short circuit and over-temperature. Built-in Modbus RTU (RS-485) and an integrated PID loop allow the CFW110010T4ON1Z to run closed-loop pressure, flow or level control standalone, or integrate into plant DCS/PLC systems. WEG's plug-in accessory architecture lets the CFW110010T4ON1Z accept optional fieldbus modules (PROFIBUS DP, CANopen, DeviceNet, EtherNet/IP and PROFINET), I/O expansion and a remote HMI, so the same base drive can be standardised across mixed Aramco, SABIC and utility control networks without changing the power section. The control firmware includes flying-start, DC-braking, multi-speed presets, skip-frequencies to avoid mechanical resonance, and a programmable SoftPLC for simple machine logic inside the drive.

Performance & Specifications Continuous output is 10.0A for motors up to 5HP (3.7kW), with 150% overload for 60 seconds and 200% for 0.5 seconds for high-inertia starts. The 380-480V 3-Phase input suits Saudi grid conditions, and the IP20 chassis is rated -10°C to +50°C with published derating above 40°C for the Kingdom's high ambient temperatures. Variable-torque pump and fan loads benefit from the drive's energy-optimisation and skip-frequency functions. Carrier (switching) frequency is adjustable so installers can trade acoustic noise against thermal derating, and the CFW110010T4ON1Z supports long motor-cable runs typical of large process plants where the drive sits in an air-conditioned switchroom and the motor is hundreds of metres away in the field. An internal braking transistor (DBN versions) handles regenerative loads such as decelerating high-inertia fans and downhill conveyors, dissipating energy in an external resistor to give controlled, repeatable stopping without over-voltage trips.

Applications in Saudi Arabia The CFW110010T4ON1Z controls high-lift and transfer pumps at SWCC and National Water Company stations around Riyadh, Dammam and Jeddah, cooling-tower and process fans at SABIC petrochemical plants in Jubail and Yanbu, conveyor and crusher drives at MAADEN mining operations in Ras Al-Khair, and HVAC and chilled-water plant across the NEOM, Red Sea and Qiddiya giga-projects. Variable-speed control delivers energy savings, soft starting and precise process regulation in line with the Saudi Energy Efficiency Center programme and Vision 2030 targets.

Why Choose Razz Middle East for WEG Products Razz Middle East supplies genuine WEG drives from local Saudi stock with full WEG documentation, 4-hour RFQ response and SAR pricing. We deliver Kingdom-wide to Riyadh, Dammam, Al Khobar, Jubail, Yanbu and NEOM, and our engineers provide drive sizing, parameter configuration, commissioning and after-sales support for the CFW110010T4ON1Z.