Werma 461.320.60 Werma Signal Towers, Beacons and Sounders

Razz Middle East supplies Werma optical and audible signalling devices in Saudi Arabia, sourced to order and delivered duty-paid to site. The range covers stacked signal tower elements, single beacons, and horns and sounders for machines and plant. Part numbers are written in a dotted form such as 644.400.75, where the trailing group identifies the supply voltage variant, so quote the whole string.

Werma 461.320.60

This page covers Werma part number 461.320.60 — Werma Signal Towers, Beacons and Sounders. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Werma Signal Towers, Beacons and Sounders

A Werma signal tower is assembled rather than bought as one item. A base or mounting element fixes the column to the machine, in a foot mount, a tube mount or a wall bracket, and coloured light elements stack on top of it, usually red, amber, green, blue and clear in some combination. Each element is a separate part number and carries its own light function: permanent, flashing, rotating or a strobe effect, in LED and older filament versions. An audible element can sit in the same stack, so one column both shows and sounds the machine state. Alongside the towers, the range includes single beacons for wall and surface mounting and standalone horns and sounders with selectable tones and adjustable volume. The dotted part number is what distinguishes all of this: the leading groups identify the series and the element, and the last group identifies the supply voltage, so two otherwise identical elements for different control voltages differ only in the final digits.

Werma Signal Towers, Beacons and Sounders in Saudi Arabia

Signal towers are how a Saudi production hall shows its state at a glance. Packaging, bottling and filling lines in food and beverage factories run a column on each machine so a single operator can see which station has stopped from the far end of the hall. Cement plants, water treatment sites and pump stations use single beacons and sounders on pump houses, chlorine rooms and outdoor skids as local alarm indication. Machine builders and panel shops fitting out projects in Riyadh, Jeddah and the industrial cities specify them as standard machine equipment. Two local points are worth noting: outdoor units take direct sun and high ambient temperature, which favours LED elements over filament ones, and audible devices in a noisy plant should be selected for the tone that carries, not only the rated sound level.

Ordering and lead time

Give the full dotted part number for every element you want, and remember that a complete column is several part numbers: the base or mounting element, each coloured light element, any audible element, and the bracket or tube if it is not part of the base. State the control voltage you will feed it, because that is what the last group of digits encodes and it is the most common ordering mistake. State the light function you need, steady, flashing or rotating, since colour alone does not determine it. For sounders, state the tone and whether volume adjustment is required. For outdoor mounting, say so. Werma items are sourced to order with a lead time of about three weeks, delivered duty-paid to site.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.