Norgren TM/50/RAU/2S Norgren Pneumatic Actuator Assemblies

Razz Middle East supplies Norgren pneumatic actuators and cylinder assemblies in Saudi Arabia, sourced to order against the full ordering string. Norgren works in pneumatics - actuators, valves, air preparation and fittings - and its cylinder references are built codes rather than catalogue numbers: the digits set the bore, and the fields separated by slashes set the stroke, the mounting and the options.

Norgren TM/50/RAU/2S

This page covers Norgren part number TM/50/RAU/2S — Norgren Pneumatic Actuator Assemblies. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Norgren Pneumatic Actuator Assemblies

A pneumatic cylinder converts air pressure into linear force and stroke. Force is bore area multiplied by working pressure, less friction, so the bore figure in the reference is the first thing that has to be right. Stroke is a separate field. Beyond those two, the code carries the construction: profile, round-line or tie-rod body, single or double acting, cushioned or not, magnetic piston for position sensing or plain, rod thread and rod end, and the mounting - foot, flange, clevis, trunnion or through-hole. Seal material is the option that gets forgotten, and it decides whether the cylinder survives high ambient temperature, food-grade wash-down or an oil-mist environment. Because the code is composed rather than looked up, every character has a position and a meaning, and dropping one field produces a cylinder that mounts differently or has no magnet for the position sensors already wired to the machine. That is why an actuator is quoted against the whole string, and why the string on the existing unit is more reliable than a parts list produced when the machine was built.

Norgren Pneumatic Actuator Assemblies in Saudi Arabia

Compressed air runs the fast, repetitive motion in Saudi factories. Cylinders of this kind operate pushers, gates, clamps and diverters on packaging, filling and bottling lines in food, dairy and water plants; they open and close dampers and slide gates in cement, minerals and bulk handling; they actuate process valves on skids in petrochemical and water treatment service; and they do the clamping and ejection work on plastics machinery. Air quality is the local variable that decides how long they last. Ambient dust loads intake filters, and the moisture that condenses from humid Gulf air in an aftercooler carries through to the actuator unless air preparation is maintained, washing out lubrication and scoring seals. Heat is the other factor, and standard nitrile seals in a hot line or a sun-exposed skid harden faster than the same cylinder would indoors. A cylinder that fails repeatedly on one machine is usually reporting a problem in the air supply rather than a defect in itself.

Ordering and lead time

Send the complete ordering string as it appears on the actuator body or its label, including every field between the slashes. A partial code is not a specification: two cylinders with the same bore and stroke can differ in mounting, cushioning, rod end and whether the piston carries a magnet, and only the full string distinguishes them. If the marking has worn off, give the bore, the stroke, the body style, the mounting arrangement and the rod thread, and send a photograph showing how it is fixed to the machine. Say whether the existing cylinder has position sensors clamped to it, because the replacement must have a magnetic piston or those sensors will read nothing. State the working pressure and the ambient temperature if the service is unusual, so seal material can be checked. Supplied to order, three weeks to site, delivered duty-paid.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.