Micro Detectors AM6/AP-2H Micro Detectors Proximity and Photoelectric Sensors

Razz Middle East supplies Micro Detectors proximity and photoelectric sensors across Saudi Arabia. The range covers inductive proximity sensors in cylindrical and rectangular housings, photoelectric sensors in diffuse, retro-reflective and through-beam forms, and the mounting brackets, reflectors and cordsets that go with them. Sensors are sourced to order against the exact type code and delivered duty-paid to site.

Micro Detectors AM6/AP-2H

This page covers Micro Detectors part number AM6/AP-2H — Micro Detectors Proximity and Photoelectric Sensors. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Micro Detectors Proximity and Photoelectric Sensors

An inductive proximity sensor detects metal without contact by sensing the damping of an oscillating field, and it is specified by five things: the housing form and thread size, the nominal sensing distance, whether the head is shielded for flush mounting in metal or unshielded for longer range, the output as PNP or NPN and normally open or normally closed, and the connection as flying lead or M12 plug. The nominal sensing distance is quoted for mild steel; aluminium, brass and stainless steel targets reduce it by a published correction factor, so a sensor selected on the nominal figure alone will often miss a non-ferrous target. Photoelectric versions cover the three standard optical arrangements, where a diffuse sensor depends on the reflectivity of the object, a retro-reflective sensor works against a supplied reflector, and a through-beam pair separates emitter and receiver for the longest and most contamination-tolerant sensing. Type codes are positional strings in which the prefix gives the family and the suffix the output and connection.

Micro Detectors Proximity and Photoelectric Sensors in Saudi Arabia

These sensors are consumed on machine maintenance rather than in process plant. Packaging and bottling lines, conveyors, palletisers and filling machines in food and beverage plants around Riyadh, Jeddah and Al Kharj use them for part presence, position confirmation and end-of-travel detection. Plastics, printing, woodworking and metal fabrication machines use them on cylinder position and guard position sensing. Logistics and warehouse conveyor systems use photoelectric sensors for parcel presence and gap control. Sensors are among the highest-turnover electrical spares on a production line because they sit in the path of moving product and take mechanical damage. Two local conditions shorten life: dust and product residue on a lens face causes intermittent detection long before outright failure, and high ambient temperature near ovens, extruders and hot fill equipment shortens electronics life, so cable routing and mounting position are worth reviewing when a sensor fails repeatedly.

Ordering and lead time

Quote the type code exactly as printed on the sensor barrel or label, for example AM1/AP-2A or AE1/AP-3F, including the characters after the slash, which carry the output and connection. If the marking has worn away, give the housing diameter or thread size and body length, the required sensing distance, the target material, whether the sensor must be mounted flush in metal, the output type as PNP or NPN and normally open or normally closed, the supply voltage and whether a cable or an M12 plug is needed. For photoelectric sensors, state the optical arrangement and whether a reflector is required, since it is a separate item. Mounting brackets and cordsets are also separate references. Sensors are sourced to order with a typical lead time of three weeks and delivered duty-paid to site.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.