FAG Arcanol MULTI2 Bearing Grease 400g Cartridge

FAG Arcanol MULTI2 is Schaeffler's premier universal bearing grease, formulated specifically for rolling bearings and designed to meet the demanding lubrication requirements of electric motors, pumps, gearboxes, and general industrial rotating equipment operating in Saudi Arabia's challenging climate. Based on a lithium-complex soap thickener and a mineral base oil with carefully selected VI improvers, MULTI2 achieves the combination of wide operating temperature range, good water resistance, anti-wear properties, and shear stability that make it the single most versatile bearing grease in the Arcanol range — and the pre-fill grease used by Schaeffler in the majority of its sealed and pre-greased bearing variants, including the X-life sealed series and the majority of Y-bearing and insert bearing products supplied to the Saudi market. The NLGI consistency grade 2 designation places MULTI2 in the standard consistency category for electric motor and pump bearing applications, with the worked penetration characteristics appropriate for the conventional pressed steel and polyamide cage designs used in the vast majority of FAG rolling bearings.

The technical performance of Arcanol MULTI2 is defined by its operating temperature range of -40°C to +160°C (short-term to +180°C), oil viscosity at 40°C of 100 mm²/s (ISO VG 100 equivalent), and a base oil viscosity index of above 100, ensuring adequate lubricating film thickness at Saudi Arabia's summer ambient temperatures while maintaining pumpability and flow through grease nipples at normal winter ambient temperatures. The lithium-complex thickener provides substantially better oxidation resistance and mechanical shear stability than conventional lithium soap greases, extending the re-lubrication interval in electric motor applications by a factor of 1.5–2.0 compared to standard lithium grease — a practical benefit in Saudi industrial facilities where the drive to reduce maintenance labour cost makes extending re-greasing intervals a direct economic advantage. The anti-wear additive package in MULTI2 meets the DIN 51819 FE8 standard, providing a documented level of protection against false brinelling and standstill corrosion during motor storage and transport — relevant in Saudi Arabia's industrial spare parts logistics, where bearings and motors may be stored at elevated ambient temperatures for months before installation.

FAG Arcanol MULTI2 is the factory pre-fill grease for the majority of Schaeffler sealed FAG bearings (2Z shielded and 2RSR sealed variants) and Y-bearing insert products supplied into the Saudi market, and it is the grease recommended by Schaeffler's engineering team for re-lubrication of open FAG bearings in electric motor, pump, and fan applications operating in Saudi Arabia's climate. ARAMCO motor maintenance specifications at several facilities have standardised on Arcanol MULTI2 as the approved motor bearing grease for use in both relubrication and motor overhaul activities, replacing a variety of previously used greases with a single approved product that is documented to be compatible with the FAG bearings fitted in ARAMCO's standard motor population. Saudi SABIC affiliate maintenance workshops at Jubail and Yanbu maintain Arcanol MULTI2 in bulk dispensing systems for electric motor maintenance operations. Razz Middle East stocks Arcanol MULTI2 in 35g tubes, 400g cartridges, 1 kg tins, and 25 kg pails, covering all dispensing methods from manual grease gun application to automatic re-lubrication systems.

Razz Middle East provides Arcanol MULTI2 with full Schaeffler technical data sheets, safety data sheets (SDS) in Arabic and English, and re-lubrication quantity and interval guidance for the most common Saudi motor, pump, and fan bearing sizes — supporting Saudi maintenance engineers in implementing a correct, documented bearing lubrication programme that meets ARAMCO and SABIC vendor maintenance standards.