Schneider Electric GV2LE05 TeSys GV2 Motor Circuit Breakers

Razz Middle East supplies Schneider Electric TeSys GV2 motor circuit breakers across Saudi Arabia — the adjustable-dial thermal-magnetic breaker range sized to protect a single motor, together with the rotary handles and mounting accessories used with it. Every item is sourced to order against the reference you quote and delivered duty-paid to your site. Typical lead time is three weeks from order confirmation.

Schneider Electric GV2LE05

This page covers Schneider Electric part number GV2LE05 — TeSys GV2 Motor Circuit Breakers. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About TeSys GV2 Motor Circuit Breakers

GV2 is the small-motor member of the TeSys motor circuit breaker family. Unlike a fixed-rating breaker, a GV2 is built around an adjustable dial that the panel builder or commissioning technician sets to the motor's actual full-load current rather than a fixed value printed on the device — the reference defines a current range the dial covers, not one rating. GV2G is the core breaker range, wired directly into the motor circuit; GV2L and GV2ME cover related variants within the family, differing in mounting and switching arrangement. GV2RT references are accessories, principally rotary operating handles fitted to a panel front or door so the breaker can be switched or locked off without opening the enclosure.

A GV2 combines two functions: magnetic short-circuit protection, tripping near-instantly on a fault current, and on most variants adjustable thermal overload protection tracking the motor's running current. It is not a stand-alone starter — a GV2 sits ahead of a TeSys contactor as the protective member of a starter combination, the contactor switching and the breaker protecting, both selected together against the same motor rating.

TeSys GV2 Motor Circuit Breakers in Saudi Arabia

GV2 combinations are everywhere small motors are switched in the Kingdom — booster and circulation pumps, extract and supply fans, conveyor drives on packaging lines, and compressor and blower motors on HVAC and water treatment skids. It is specified widely for the same reason it needs care at commissioning: the dial must be set to the motor's actual full-load current from its nameplate, and a dial left at a default or a previous motor's setting either trips on normal starting current or fails to protect the motor it now serves.

Panel ambient temperature affects the setting as with any thermal-magnetic device — a GV2 set at a reference ambient works into a different margin inside a 45–50 °C motor control centre, routine on unconditioned plant rooms and outdoor kiosks. Because GV2 is paired with a contactor, resetting one after a motor change is a task maintenance teams handle often, and getting the dial and coil voltage right together avoids a second visit to the panel.

Ordering and lead time

Quote the full GV2 reference from the device body, and tell us the motor's full-load current and voltage if you are specifying rather than replacing — the reference selects the current range the dial covers, and the range has to bracket the actual motor current. If you are replacing a device, a photograph of the label is the fastest route to the right reference.

Tell us whether the breaker will be paired with a TeSys D contactor supplied separately or already fitted in an existing starter, since the two are chosen against the same motor rating and it is worth confirming both together. For GV2RT accessories, state whether you need a front-mounted or door-mounted rotary handle and the panel door thickness where relevant. Typical lead time is three weeks from order confirmation, and items are supplied to order and delivered duty-paid.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.