SKF 1202 SKF Bearings and Maintenance Products

Razz Middle East supplies SKF bearings and maintenance products across Saudi Arabia. The range covers rolling bearings and housings together with the mounting, alignment and condition-monitoring tools used to fit and watch them. Items are sourced to order against the exact SKF designation and delivered duty-paid to site.

SKF 1202

This page covers SKF part number 1202 — SKF Bearings and Maintenance Products. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About SKF Bearings and Maintenance Products

The bearing side of this family follows the ISO designation system, where the first digits give the type and series and the following digits give the bore, so a deep groove ball bearing such as 6205 is fixed in its principal dimensions regardless of maker. What varies is the suffix: 2RS and 2RSH indicate contact seals, ZZ or 2Z shields, C3 an increased internal clearance for hot running or interference fits, and further letters cover cage material and lubricant fill. Those suffixes are not cosmetic. A bearing supplied without the clearance class the machine was designed around will run hot and fail early. Alongside the bearings sit the tools that determine whether they survive: TIH induction heaters for controlled interference fitting, hydraulic and mechanical pullers, TMFT fitting tool sets, TKSA laser shaft alignment instruments, and CMDT and similar vibration and temperature sensors used for condition monitoring. Lubricants, automatic lubricators and seals complete the maintenance package.

SKF Bearings and Maintenance Products in Saudi Arabia

Bearings are the highest-turnover mechanical spare in any Saudi plant. Cement works at Yanbu, Riyadh and Hail run kiln support, fan and crusher bearings under continuous load and abrasive dust. Petrochemical complexes at Jubail and Yanbu carry pump and compressor bearings on critical duty, where an unplanned change costs far more than the part. Desalination and water transmission pumping stations, Ma'aden mining conveyors, steel rolling mills, and food and beverage lines all draw on the same catalogue. Ambient temperatures through the Saudi summer push bearing operating temperatures upward, which is why C3 clearance appears so often on locally installed equipment and why grease selection matters. Condition-monitoring tools have been adopted across Aramco-linked maintenance programmes, and portable alignment and induction heating equipment is increasingly held at plant workshop level rather than hired in.

Ordering and lead time

Quote the complete SKF designation including every suffix, for example 6205-2RSH/C3 rather than 6205, because the suffix carries sealing and clearance and those decide whether the bearing suits the application. If you are replacing an existing bearing, read the designation off the outer ring rather than working from shaft diameter alone, and note the machine and duty so clearance class can be checked. For housed units, state the housing type and the adapter sleeve or locking method. For tools, give the shaft or bearing bore range you need to cover, since induction heaters and pullers are sized by capacity. SKF is widely counterfeited, so orders are placed through recognised supply routes and packaging is checked on receipt. Bearings and tools in this family are sourced to order, typically three weeks, and delivered duty-paid to site.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.