Image for illustration purposes only. Actual product may vary in appearance.
SKF
SKF GE 15 ES Spherical Plain Bearing
Model: GE 15 ES
4-hour response · Pricing in SAR · Delivery across all KSA regions
SKF GE 15 ES Spherical Plain Bearing
Unlike rolling bearings, SKF spherical plain bearings carry load through sliding contact between a spherically ground inner ring and a matching outer ring seat, an arrangement that tolerates heavy alternating loads, shock and large angular misalignment far beyond what a rolling element can absorb. Steel-on-steel designs such as GE 30 ES use hardened, phosphated and MoS2-treated contact surfaces and must be relubricated through grooves and holes in the rings, making them the choice for very high loads at slow oscillating movement. Maintenance-free variants like GE 25 TXA-2LS replace the steel counter-face with a PTFE-based sliding liner and add double lip seals, so they run for life without grease, which suits pivot points that are hard to reach or where lubricant would attract dust. The GEZ series covers inch-dimensioned shafts, while matching SKF rod ends provide the same joint in a threaded eye housing for linkages and cylinders. Saudi buyers fit these joints in hydraulic cylinder eyes on construction and mining machines, gate and valve linkages in water treatment plants, and oscillating equipment across cement and steel works where dust makes greased points a liability. Key specifications for GE 15 ES: d 15 mm Bore diameter; B 12 mm Width; Bore diameter 15 mm; Outside diameter 26 mm; Basic dynamic load rating 17 kN; Basic static load rating 85 kN. GE 15 ES is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Technical Specifications
Full specifications for the GE 15 ES
- Bore diameter
- 15 mm
- Outside diameter
- 26 mm
- Width, inner ring
- 12 mm
- Width, outer ring
- 9 mm
- Basic dynamic load rating
- 17 kN
- Basic static load rating
- 85 kN
- Sliding contact surface combination
- Steel/steel, standard
- Material, inner ring
- Bearing steel
- Material, outer ring
- Bearing steel
- Maintenance
- Relubrication required
- Radial internal clearance
- CN
- Sealing
- Without
- Relubrication feature
- With
- Product net weight
- 0.0254 kg
- eClass code
- 23-05-01-06
- UNSPSC code
- 31171515
- d
- 15 mm Bore diameter
- B
- 12 mm Width
- C
- 9 mm Width outer ring
- α
- 8 ° Angle of tilt
- dk
- 22 mm Raceway diameter inner ring
- b1
- 2.4 mm Width annular lubrication groove at inner ring
- M
- 1.5 mm Diameter lubrication hole (outer ring)
- r1
- min. 0.3 mm Chamfer dimension bore
- r2
- min. 0.3 mm Chamfer dimension outer ring
- da
- min. 16.9 mm Abutment diameter shaft
- ra
- max. 0.3 mm Fillet radius shaft
- rb
- max. 0.3 mm Fillet radius housing
- Specific dynamic load factor
- K 100 N/mm²
- Specific static load factor
- K0 500 N/mm²
- Material constant
- KM 330
Key Features & Benefits
- Sliding contact carries heavy static, alternating and shock loads
- Accommodates several degrees of angular misalignment in service
- Steel-on-steel ES types are relubricatable via ring grooves and holes
- TXA-2LS types run maintenance-free on a PTFE-based liner
- Integral 2LS double lip seals retain lubricant and exclude dirt
- Metric, inch (GEZ) and rod end variants cover most joint designs
Industrial Applications in Saudi Arabia
- Hydraulic and pneumatic cylinder mountings
- Construction and earthmoving equipment pivots
- Steering and suspension linkages on heavy vehicles
- Gates, sluices and valve actuation in water plants
- Presses, shears and forging machinery
- Material handling booms and articulated arms
Industrial Supplier in Saudi Arabia
Get a Quote for the SKF GE 15 ES Spherical Plain Bearing
We respond within 4 business hours. Send model GE 15 ES for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — GE 15 ES
Common questions from buyers in Saudi Arabia and the GCC
What is the SKF GE 15 ES Spherical Plain Bearing (GE 15 ES) and what is it used for?
Unlike rolling bearings, SKF spherical plain bearings carry load through sliding contact between a spherically ground inner ring and a matching outer ring seat, an arrangement that tolerates heavy alternating loads, shock and large angular misalignment far beyond what a rolling element can absorb. Steel-on-steel designs such as GE 30 ES use hardened, phosphated and MoS2-treated contact surfaces and must be relubricated through grooves and holes in the rings, making them the choice for very high loads at slow oscillating movement. Maintenance-free variants like GE 25 TXA-2LS replace the steel counter-face with a PTFE-based sliding liner and add double lip seals, so they run for life without grease, which suits pivot points that are hard to reach or where lubricant would attract dust. The GEZ series covers inch-dimensioned shafts, while matching SKF rod ends provide the same joint in a threaded eye housing for linkages and cylinders. Saudi buyers fit these joints in hydraulic cylinder eyes on construction and mining machines, gate and valve linkages in water treatment plants, and oscillating equipment across cement and steel works where dust makes greased points a liability. Key specifications for GE 15 ES: d 15 mm Bore diameter; B 12 mm Width; Bore diameter 15 mm; Outside diameter 26 mm; Basic dynamic load rating 17 kN; Basic static load rating 85 kN. GE 15 ES is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Where can I buy the SKF GE 15 ES in Saudi Arabia?
Razz Middle East supplies genuine SKF products including the SKF GE 15 ES Spherical Plain Bearing (GE 15 ES) across all regions of Saudi Arabia — Riyadh, Jeddah, Dammam, Al Khobar, Jubail, Yanbu, Mecca, and Medina. We source fast-moving items to order and can source specialist configurations. Request a quote on this page for same-day pricing.
How do I get the best price for the GE 15 ES in KSA?
Click "Request Free Quote" on this page or message us the model number GE 15 ES on WhatsApp. Our technical sales team responds within 4 business hours with a competitive price in SAR and a confirmed delivery lead time — with no hidden charges or handling fees.
Does Razz Middle East supply genuine SKF products in Saudi Arabia?
Yes. Razz Middle East is an independent industrial supplier, not an appointed SKF distributor. We source through SKF OEM channels or through authorised SKF distributor channels and supply 100% genuine product with full manufacturer warranty and documentation, serving the oil & gas, petrochemical, power generation, water, construction and manufacturing sectors across the Kingdom.
What is the delivery lead time for the SKF GE 15 ES Spherical Plain Bearing in Saudi Arabia?
Items are sourced to order and delivered duty-paid, typically 2-3 weeks, to Riyadh, Dammam, Jeddah and the Eastern Province. Project orders and non-standard configurations can take longer. Contact us with the exact model number GE 15 ES to confirm the lead time for your quantity.
Can the GE 15 ES be supplied for industrial projects in KSA?
Yes. Razz Middle East is an approved vendor to SABIC, Ma'aden, Sadara, Saudi Energy, ACWA Power, Safari Group and others. For project orders we provide the manufacturer's technical documentation and certificates of conformity for your vendor approval file. Contact our project team with your project specification.