Image for illustration purposes only. Actual product may vary in appearance.
SKF
SKF HJ 320 EC/VA301 Cylindrical Roller Bearing
Model: HJ 320 EC/VA301
Price: Ex-Works (EXW) India — shipping & customs duty billed separately at actual cost.
Payment by bank transfer · Order confirmed within 4 business hours
You May Also Need
SKF HK 0306 TN Needle Roller Bearing
HK 0306 TN
SKF HK 0408 Needle Roller Bearing
HK 0408
SKF HK 0509 Needle Roller Bearing
HK 0509
SKF HK 0609 Needle Roller Bearing
HK 0609
SKF HK 0709 Needle Roller Bearing
HK 0709
SKF HK 0808 Needle Roller Bearing
HK 0808
SKF HK 0812.2RS Needle Roller Bearing
HK 0812.2RS
SKF HK 0908 Needle Roller Bearing
HK 0908
4-hour response · Pricing in SAR · Delivery across all KSA regions
SKF HJ 320 EC/VA301 Cylindrical Roller Bearing
Cylindrical roller bearings use rollers in line contact with the raceways, spreading load over a far larger footprint than a ball bearing of the same envelope and delivering very high radial capacity at speed. The designation's first letters describe the flange layout. NU types carry two outer-ring flanges and a plain inner ring, so the shaft can float axially inside the bearing, ideal for the non-locating position in a two-bearing arrangement. NJ adds one inner-ring flange to hold the shaft in one axial direction, while NUP combines a fixed flange with a loose abutment ring to locate in both directions. N reverses the layout with inner-ring flanges, and NCF denotes full-complement designs that trade speed for maximum capacity. Suffixes describe the cage: ECP for reinforced polyamide, ECJ for pressed steel, ECML for machined brass, all on the high-capacity EC roller geometry. Engineers specify them wherever heavy radial load, stiffness and separable mounting matter, as in NU 205 ECP, NJ 309 ECJ or NUP 2210 ECP. Across Saudi Arabia these bearings run in gearbox shafts, electric motors, crane sheaves and rolling-mill stands, from Jubail and Yanbu petrochemical plants to cement lines in Riyadh and the Eastern Province. Key specifications for HJ 320 EC/VA301: Bore diameter 100 mm; Outside diameter 139.5 mm; Width in bore 13 mm; Material Bearing steel; Coating Without; Indicative carbon footprint for new product 3.2 kg CO2e. HJ 320 EC/VA301 is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Technical Specifications
Full specifications for the HJ 320 EC/VA301
- Bore diameter
- 100 mm
- Outside diameter
- 139.5 mm
- Width in bore
- 13 mm
- Material
- Bearing steel
- Coating
- Without
- Indicative carbon footprint for new product
- 3.2 kg CO2e
- Product net weight
- 0.87 kg
- eClass code
- 23-05-09-01
- UNSPSC code
- 31171505
Key Features & Benefits
- Line contact between rollers and raceways for high radial load capacity
- Separable rings simplify mounting, inspection and interference fits on both rings
- NU and N designs permit axial shaft displacement within the bearing
- NJ locates the shaft in one direction; NUP locates in both
- EC geometry with larger roller sets raises dynamic load ratings
- Cage options in polyamide (ECP), pressed steel (ECJ) or machined brass (ECML)
Industrial Applications in Saudi Arabia
- Industrial gearboxes and speed reducers
- Medium and large electric motors and generators
- Centrifugal pumps and axially loaded pump shafts (NJ/NUP positions)
- Steel and aluminium rolling mill roll necks
- Crane wheels, sheaves and material handling drives
- Compressors, blowers and industrial fans
Industrial Supplier in Saudi Arabia
Get a Quote for the SKF HJ 320 EC/VA301 Cylindrical Roller Bearing
We respond within 4 business hours. Send model HJ 320 EC/VA301 for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — HJ 320 EC/VA301
Common questions from buyers in Saudi Arabia and the GCC
What is the SKF HJ 320 EC/VA301 Cylindrical Roller Bearing (HJ 320 EC/VA301) and what is it used for?
Cylindrical roller bearings use rollers in line contact with the raceways, spreading load over a far larger footprint than a ball bearing of the same envelope and delivering very high radial capacity at speed. The designation's first letters describe the flange layout. NU types carry two outer-ring flanges and a plain inner ring, so the shaft can float axially inside the bearing, ideal for the non-locating position in a two-bearing arrangement. NJ adds one inner-ring flange to hold the shaft in one axial direction, while NUP combines a fixed flange with a loose abutment ring to locate in both directions. N reverses the layout with inner-ring flanges, and NCF denotes full-complement designs that trade speed for maximum capacity. Suffixes describe the cage: ECP for reinforced polyamide, ECJ for pressed steel, ECML for machined brass, all on the high-capacity EC roller geometry. Engineers specify them wherever heavy radial load, stiffness and separable mounting matter, as in NU 205 ECP, NJ 309 ECJ or NUP 2210 ECP. Across Saudi Arabia these bearings run in gearbox shafts, electric motors, crane sheaves and rolling-mill stands, from Jubail and Yanbu petrochemical plants to cement lines in Riyadh and the Eastern Province. Key specifications for HJ 320 EC/VA301: Bore diameter 100 mm; Outside diameter 139.5 mm; Width in bore 13 mm; Material Bearing steel; Coating Without; Indicative carbon footprint for new product 3.2 kg CO2e. HJ 320 EC/VA301 is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Where can I buy the SKF HJ 320 EC/VA301 in Saudi Arabia?
Razz Middle East supplies genuine SKF products including the SKF HJ 320 EC/VA301 Cylindrical Roller Bearing (HJ 320 EC/VA301) across all regions of Saudi Arabia — Riyadh, Jeddah, Dammam, Al Khobar, Jubail, Yanbu, Mecca, and Medina. We source fast-moving items to order and can source specialist configurations. Request a quote on this page for same-day pricing.
How do I get the best price for the HJ 320 EC/VA301 in KSA?
Click "Request Free Quote" on this page or message us the model number HJ 320 EC/VA301 on WhatsApp. Our technical sales team responds within 4 business hours with a competitive price in SAR, confirmed availability and delivery lead time — with no hidden charges or handling fees.
Is Razz Middle East an authorized SKF supplier in Saudi Arabia?
Razz Middle East is a specialist industrial equipment supplier in Saudi Arabia focused on SKF and other leading global brands. We supply 100% genuine OEM products backed by full manufacturer warranty, serving the oil & gas, petrochemical, power generation, water, construction, and manufacturing sectors across the Kingdom.
What is the delivery lead time for the SKF HJ 320 EC/VA301 Cylindrical Roller Bearing in Saudi Arabia?
In-stock items typically ship within 24-48 hours to Riyadh, Dammam, Jeddah, and the Eastern Province. Project orders and non-standard configurations generally take 2-6 weeks. Contact us with the exact model number HJ 320 EC/VA301 for a precise availability confirmation and delivery date.
Can the HJ 320 EC/VA301 be supplied for ARAMCO, SABIC, or NEOM projects in KSA?
Yes. Razz Middle East has experience supplying SKF equipment to major industrial projects and EPC contractors across Saudi Arabia. We can provide full technical documentation, Material Inspection Reports (MIR), and certificates of conformity to meet vendor approval requirements. Contact our project team to discuss your specific project requirements.