Image for illustration purposes only. Actual product may vary in appearance.
SKF
SKF SIKAC 6 M Bearing Component
Model: SIKAC 6 M
4-hour response · Pricing in SAR · Delivery across all KSA regions
SKF SIKAC 6 M Bearing Component
For more than a century SKF has set the benchmark in rotating equipment technology, and this item belongs to a catalogue that spans deep groove ball bearings, spherical and cylindrical roller bearings, tapered and angular contact designs, housings, seals, lubrication products and maintenance tools. Every genuine SKF component is produced from clean, controlled steel to tight dimensional and running-accuracy tolerances, then verified against ISO standards, which is why plants specify the brand where unplanned downtime is expensive. Selecting the exact designation matters: suffixes encode internal clearance, cage material, seal or shield arrangement, grease fill and heat stabilisation, so a correctly matched part reaches its full calculated service life. Razz Middle East supplies this designation as a factory-fresh, traceable SKF product with the original packaging and markings intact. Our engineers can cross-reference legacy or competitor part numbers, confirm fits and clearances, and recommend the right mounting method and lubricant for your operating conditions. Industrial buyers across Saudi Arabia rely on genuine SKF parts to keep pumps, motors, gearboxes, conveyors and fans running in demanding sectors from cement and steel to food processing, water treatment and petrochemicals. Key specifications for SIKAC 6 M: d 6 mm Bore diameter; B 9 mm Width inner ring; Basic dynamic load rating 4.3 kN; Basic static load rating 5.4 kN; Sealing Without; Bore diameter, bearing inner ring 6 mm. SIKAC 6 M is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Technical Specifications
Full specifications for the SIKAC 6 M
- Bore diameter, bearing inner ring
- 6 mm
- Outside diameter, housing eye
- 21 mm
- Width, bearing inner ring
- 9 mm
- Thread designation
- M 6
- Width, housing eye
- 7.5 mm
- Centre height, housing (from end of shank)
- 30 mm
- Housing length, total
- 41 mm
- Basic dynamic load rating
- 4.3 kN
- Basic static load rating
- 5.4 kN
- Sliding contact surface combination
- Steel/bronze
- Material, housing
- Steel
- Material, inner ring
- Bearing steel
- Maintenance
- Relubrication required
- Attachment feature, rod end shank
- Right-hand female thread
- Sealing
- Without
- Product net weight
- 0.028 kg
- eClass code
- 23-05-01-05
- UNSPSC code
- 31171508
- d
- 6 mm Bore diameter
- d2
- max. 21 mm Diameter head
- B
- 9 mm Width inner ring
- G
- M 6 Thread
- C1
- max. 7.5 mm Width head
- h1
- 30 mm Height shank end face - centre rod end eye
- α
- 13 ° Angle of tilt
- dk
- 12.7 mm Raceway diameter inner ring
- d3
- ≈ 10 mm Housing diameter shank
- d4
- max. 14 mm Housing diameter shank
- l3
- min. 9 mm Length thread
- l4
- max. 41 mm Length (height) housing
- l5
- ≈ 5 mm Length wrench flat
- l7
- min. 11 mm Distance shank chamfer - centre rod end eye
- w
- 11 mm Size wrench
- r1
- min. 0.3 mm Chamfer dimension bore
- Specific dynamic load factor
- K 50 N/mm²
- Material constant
- KM 330
Key Features & Benefits
- Genuine SKF product with full traceability and original packaging
- Manufactured from high-cleanliness bearing steel to ISO tolerances
- Designation suffixes define clearance, seals, cage and grease options
- Engineered for long, predictable service life under rated conditions
- Backed by SKF documentation for mounting, fits and lubrication
- Cross-reference support available for legacy and competitor numbers
Industrial Applications in Saudi Arabia
- Electric motors and generators
- Pumps, compressors and fans
- Gearboxes and power transmission drives
- Conveyors and material handling systems
- Heavy process machinery in cement, steel and mining
- Food, pharmaceutical and water treatment equipment
Industrial Supplier in Saudi Arabia
Get a Quote for the SKF SIKAC 6 M Bearing Component
We respond within 4 business hours. Send model SIKAC 6 M for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — SIKAC 6 M
Common questions from buyers in Saudi Arabia and the GCC
What is the SKF SIKAC 6 M Bearing Component (SIKAC 6 M) and what is it used for?
For more than a century SKF has set the benchmark in rotating equipment technology, and this item belongs to a catalogue that spans deep groove ball bearings, spherical and cylindrical roller bearings, tapered and angular contact designs, housings, seals, lubrication products and maintenance tools. Every genuine SKF component is produced from clean, controlled steel to tight dimensional and running-accuracy tolerances, then verified against ISO standards, which is why plants specify the brand where unplanned downtime is expensive. Selecting the exact designation matters: suffixes encode internal clearance, cage material, seal or shield arrangement, grease fill and heat stabilisation, so a correctly matched part reaches its full calculated service life. Razz Middle East supplies this designation as a factory-fresh, traceable SKF product with the original packaging and markings intact. Our engineers can cross-reference legacy or competitor part numbers, confirm fits and clearances, and recommend the right mounting method and lubricant for your operating conditions. Industrial buyers across Saudi Arabia rely on genuine SKF parts to keep pumps, motors, gearboxes, conveyors and fans running in demanding sectors from cement and steel to food processing, water treatment and petrochemicals. Key specifications for SIKAC 6 M: d 6 mm Bore diameter; B 9 mm Width inner ring; Basic dynamic load rating 4.3 kN; Basic static load rating 5.4 kN; Sealing Without; Bore diameter, bearing inner ring 6 mm. SIKAC 6 M is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Where can I buy the SKF SIKAC 6 M in Saudi Arabia?
Razz Middle East supplies genuine SKF products including the SKF SIKAC 6 M Bearing Component (SIKAC 6 M) across all regions of Saudi Arabia — Riyadh, Jeddah, Dammam, Al Khobar, Jubail, Yanbu, Mecca, and Medina. We source fast-moving items to order and can source specialist configurations. Request a quote on this page for same-day pricing.
How do I get the best price for the SIKAC 6 M in KSA?
Click "Request Free Quote" on this page or message us the model number SIKAC 6 M on WhatsApp. Our technical sales team responds within 4 business hours with a competitive price in SAR and a confirmed delivery lead time — with no hidden charges or handling fees.
Does Razz Middle East supply genuine SKF products in Saudi Arabia?
Yes. Razz Middle East is an independent industrial supplier, not an appointed SKF distributor. We source through SKF OEM channels or through authorised SKF distributor channels and supply 100% genuine product with full manufacturer warranty and documentation, serving the oil & gas, petrochemical, power generation, water, construction and manufacturing sectors across the Kingdom.
What is the delivery lead time for the SKF SIKAC 6 M Bearing Component in Saudi Arabia?
Items are sourced to order and delivered duty-paid, typically 2-3 weeks, to Riyadh, Dammam, Jeddah and the Eastern Province. Project orders and non-standard configurations can take longer. Contact us with the exact model number SIKAC 6 M to confirm the lead time for your quantity.
Can the SIKAC 6 M be supplied for industrial projects in KSA?
Yes. Razz Middle East is an approved vendor to SABIC, Ma'aden, Sadara, Saudi Energy, ACWA Power, Safari Group and others. For project orders we provide the manufacturer's technical documentation and certificates of conformity for your vendor approval file. Contact our project team with your project specification.