Image for illustration purposes only. Actual product may vary in appearance.
SKF
SKF TMHP 10E Puller
Model: TMHP 10E
Ships from our supplier in India — this is why import, clearance and duty are added at checkout. We handle the import, customs clearance and delivery to your door.
Goods price only — import, clearance and duty are calculated at checkout. Minimum order SAR 500 per country of shipment.
Shipping, customs clearance, duty and VAT are calculated at checkout from your full order — the cost per item falls as you add more.
Payment by bank transfer · Order confirmed within 4 business hours
You May Also Need
SKF TMHP 15/260 Puller
TMHP 15/260
SKF TMHP 15/260X Puller
TMHP 15/260X
SKF TMHP 30/170 Puller
TMHP 30/170
SKF TMHP 30/350 Puller
TMHP 30/350
SKF TMHP 30/350X Puller
TMHP 30/350X
SKF TMHP 30/600 Puller
TMHP 30/600
SKF TMHP 30/600X Puller
TMHP 30/600X
SKF TMHP 50/140 Puller
TMHP 50/140
4-hour response · Pricing in SAR · Delivery across all KSA regions
SKF TMHP 10E Puller
SKF hydraulic and mechanical pullers are purpose-built for removing bearings, gears, pulleys and couplings from a shaft without damaging either the component or the seat. A three-leg or two-leg jaw grips behind the part while a hydraulic or mechanical spindle draws it off in a controlled, even pull, avoiding the shock loading that a hammer-and-chisel removal transmits into the shaft and housing. Jaw reach and spread are matched to the job: shorter jaws suit tight, shielded bearings while long-reach jaws pull components recessed deep in a housing bore. Maintenance teams across Saudi Arabia's cement, mining and power-generation sites keep a puller set on hand for planned bearing changeouts, where a controlled pull protects an expensive replacement bearing from the induced shock damage that a rough removal can leave in the raceway. Key specifications for TMHP 10E: Workpiece outer diameter range, using arms Set 1: 75 to 170 mm Set 2: 80 to 250 mm Set 3: 110 to 280 mm; Reach, using arms (max) Set 1: 115 mm Set 2: 160 mm Set 3: 200 mm; Claw height 8 mm; Claw length 15 mm; Claw width 25 mm; Hydraulic spindle, piston stroke 80 mm. TMHP 10E is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Technical Specifications
Full specifications for the TMHP 10E
- Workpiece outer diameter range, using arms
- Set 1: 75 to 170 mm
- Set 2
- 80 to 250 mm
- Set 3
- 110 to 280 mm
- Reach, using arms (max)
- Set 1: 115 mm
- Set 2
- 160 mm
- Set 3
- 200 mm
- Claw height
- 8 mm
- Claw length
- 15 mm
- Claw width
- 25 mm
- Hydraulic spindle, piston stroke
- 80 mm
- Puller adaptor thread
- UN 1.5 x 16 tpi
- Total spindle length
- 655 mm (incl. 3 available extension pieces)
- Suitable for workpiece dismounting from a Housing
- No
- Suitable for bearing type(s)
- All
- Dismounting force generation
- Hydraulic spindle (TMHS 100)
- Pulling force (max)
- 100 kN
- Total number of arms in kit
- 3 sets of 3
- Spindle nose piece
- yes, ⌀ 30mm
- Colour
- Black
- Material
- Alloy engineering steels, hardened and tempered
- Coating
- Black phosphated, Hydraulic spindle with trivalent chromium parts
- Recommended storage temperature
- 5 – 40
- Relative humidity
- max 75%
- Case dimensions (l x h x w)
- 580 x 410 x 70 mm
- Country of Manufacturing (COM code)
- 49 - Taiwan
- Product net weight
- 15 kg
- eClass code
- 23-05-19-01
- UNSPSC code
- 27111712
- Spare arm for Hydraulic jaw puller kit and Hydraulic puller kit
- 3 x TMHP 10E-10
- Spare arm for Hydraulic jaw puller kit
- 3 x TMHP 10E-11
- Advanced hydraulic spindle
- TMHS 100
- Spare advanced hydraulic spindle, spindle only
- TMHS 100-1
- Spare set of extension pieces and nose piece for Hydraulic spindles
- TMHS 8T
- Spare arm for Hydraulic puller kit
- 3 x TMHP 10E-9
- Tri-section pulling plate
- TMMS 100
- Puller protection blanket
- TMMX 210
Silver
°C
Key Features & Benefits
- Even, controlled pull avoids shock damage to the shaft and housing
- Two-leg and three-leg jaw configurations for different component geometries
- Hydraulic spindle option for high pull-off forces on stubborn fits
- Reversible jaws extend reach for recessed components
- Forged jaw construction for repeated heavy-duty use
- Compact storage case keeps the full set organised on site
Industrial Applications in Saudi Arabia
- Bearing removal from motor and pump shafts
- Gear and coupling removal in gearboxes
- Pulley and sprocket removal on conveyor drives
- Planned maintenance bearing changeouts
- Field service and mobile maintenance kits
- Workshop bearing reconditioning
Industrial Supplier in Saudi Arabia
Get a Quote for the SKF TMHP 10E Puller
We respond within 4 business hours. Send model TMHP 10E for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — TMHP 10E
Common questions from buyers in Saudi Arabia and the GCC
What is the SKF TMHP 10E Puller (TMHP 10E) and what is it used for?
SKF hydraulic and mechanical pullers are purpose-built for removing bearings, gears, pulleys and couplings from a shaft without damaging either the component or the seat. A three-leg or two-leg jaw grips behind the part while a hydraulic or mechanical spindle draws it off in a controlled, even pull, avoiding the shock loading that a hammer-and-chisel removal transmits into the shaft and housing. Jaw reach and spread are matched to the job: shorter jaws suit tight, shielded bearings while long-reach jaws pull components recessed deep in a housing bore. Maintenance teams across Saudi Arabia's cement, mining and power-generation sites keep a puller set on hand for planned bearing changeouts, where a controlled pull protects an expensive replacement bearing from the induced shock damage that a rough removal can leave in the raceway. Key specifications for TMHP 10E: Workpiece outer diameter range, using arms Set 1: 75 to 170 mm Set 2: 80 to 250 mm Set 3: 110 to 280 mm; Reach, using arms (max) Set 1: 115 mm Set 2: 160 mm Set 3: 200 mm; Claw height 8 mm; Claw length 15 mm; Claw width 25 mm; Hydraulic spindle, piston stroke 80 mm. TMHP 10E is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Where can I buy the SKF TMHP 10E in Saudi Arabia?
Razz Middle East supplies genuine SKF products including the SKF TMHP 10E Puller (TMHP 10E) across all regions of Saudi Arabia — Riyadh, Jeddah, Dammam, Al Khobar, Jubail, Yanbu, Mecca, and Medina. We source fast-moving items to order and can source specialist configurations. Request a quote on this page for same-day pricing.
How do I get the best price for the TMHP 10E in KSA?
Click "Request Free Quote" on this page or message us the model number TMHP 10E on WhatsApp. Our technical sales team responds within 4 business hours with a competitive price in SAR and a confirmed delivery lead time — with no hidden charges or handling fees.
Does Razz Middle East supply genuine SKF products in Saudi Arabia?
Yes. Razz Middle East is an independent industrial supplier, not an appointed SKF distributor. We source through SKF OEM channels or through authorised SKF distributor channels and supply 100% genuine product with full manufacturer warranty and documentation, serving the oil & gas, petrochemical, power generation, water, construction and manufacturing sectors across the Kingdom.
What is the delivery lead time for the SKF TMHP 10E Puller in Saudi Arabia?
Items are sourced to order and delivered duty-paid, typically 2-3 weeks, to Riyadh, Dammam, Jeddah and the Eastern Province. Project orders and non-standard configurations can take longer. Contact us with the exact model number TMHP 10E to confirm the lead time for your quantity.
Can the TMHP 10E be supplied for industrial projects in KSA?
Yes. Razz Middle East is an approved vendor to SABIC, Ma'aden, Sadara, Saudi Energy, ACWA Power, Safari Group and others. For project orders we provide the manufacturer's technical documentation and certificates of conformity for your vendor approval file. Contact our project team with your project specification.