Image for illustration purposes only. Actual product may vary in appearance.
SKF
SKF UC 215 Bearing Unit
Model: UC 215
Ships from our supplier in India — this is why import, clearance and duty are added at checkout. We handle the import, customs clearance and delivery to your door.
Goods price only — import, clearance and duty are calculated at checkout. Minimum order SAR 500 per country of shipment.
Shipping, customs clearance, duty and VAT are calculated at checkout from your full order — the cost per item falls as you add more.
Payment by bank transfer · Order confirmed within 4 business hours
You May Also Need
SKF UC 216 Bearing Unit
UC 216
SKF UC 218 Bearing Unit
UC 218
SKF UCF 212 Bearing Unit
UCF 212
SKF UCF 212-36 Bearing Unit
UCF 212-36
SKF UCF 213 Bearing Unit
UCF 213
SKF UCF 213-40 Bearing Unit
UCF 213-40
SKF UCF 214 Bearing Unit
UCF 214
SKF UCF 215 Bearing Unit
UCF 215
4-hour response · Pricing in SAR · Delivery across all KSA regions
SKF UC 215 Bearing Unit
SKF Y-bearings are single-row deep groove ball bearings fitted with an extended inner ring and a convex, sphered outer ring surface, letting them seat directly into a matching housing and compensate for modest initial shaft misalignment. The extended inner ring locks straight onto a plain commercial shaft, most commonly through two grub screws as in the YAR 204-2F or through UC-type set-screw inserts, so there is no need for adapter sleeves or shoulders. Combined with pillow block housings such as UCP 205 or SY 25 TF, four-bolt flanged units like UCF and FY 30 TF, or two-bolt oval FYTB flanges, they form ready-to-mount units for light and medium duty machinery. Housings are supplied in grey cast iron or lightweight corrosion-resistant composite, and most inserts carry integral seals with flingers plus a relubrication groove and grease fitting for extended service in dusty or washdown environments. Across Saudi Arabia these units keep grain and date-processing conveyors, poultry and food plant lines, irrigation pumps, ventilation fans and cement bagging equipment running despite heat, dust and frequent washdowns. Key specifications for UC 215: d 75 mm Bore diameter; B 73.3 mm Width of inner ring; Bore diameter 75 mm; Outside diameter 130 mm; Basic dynamic load rating 66.3 kN; Basic static load rating 49 kN. UC 215 is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Technical Specifications
Full specifications for the UC 215
- Shaft diameter
- 75 mm
- Bore diameter
- 75 mm
- Outside diameter
- 130 mm
- Width, total
- 73.3 mm
- Width, inner ring
- 73.3 mm
- Width, outer ring
- 29 mm
- Basic dynamic load rating
- 66.3 kN
- Basic static load rating
- 49 kN
- Limiting speed
- 2 600 r/min
- Note
- Limiting speed with shaft tolerance h6
- Retaining feature, inner ring
- Set screws
- Bore type
- Cylindrical
- Rolling elements
- Balls
- Outer ring type
- Spherical
- Inner ring extension
- On both sides
- Cage
- Non-metallic
- Rubber seating ring
- Without
- Material, bearing
- Bearing steel
- Coating
- Without
- Sealing
- Seal and flinger on both sides
- Sealing type
- Contact, standard
- Lubricant
- Grease
- Relubrication feature
- With
- Product net weight
- 2.03 kg
- eClass code
- 23-05-08-02
- UNSPSC code
- 31171536
- d
- 75 mm Bore diameter
- B
- 73.3 mm Width of inner ring
- C
- 29 mm Width of outer ring
- d1
- ≈ 92.05 mm Outside diameter of inner ring
- B4
- 12 mm Distance face to thread centre
- r1,2
- min. 1.5 mm Chamfer dimension of inner ring
- s1
- 46.3 mm Distance from locking device side face to raceway centre
- Fatigue load limit
- Pu 2.04 kN
- Calculation factor
- f0 15
- Set screw
- G2 M10x1
- Hexagonal key size for set screw
- N 5 mm
Key Features & Benefits
- Sphered outer ring seats in matching housing to absorb initial misalignment
- Set-screw (grub screw) or eccentric collar locking directly on plain shafts
- Integral contact seals with flingers keep out dust and moisture
- Relubrication groove and grease nipple on most insert and unit designs
- Housings available in cast iron or hygienic corrosion-resistant composite
- Supplied ready-greased and ready-to-mount, cutting installation time
Industrial Applications in Saudi Arabia
- Belt and roller conveyors in bulk handling
- Agricultural machinery and grain handling equipment
- Food and beverage processing lines
- Ventilation fans and air handling units
- Textile and packaging machinery
- Water treatment screens and screw equipment
Industrial Supplier in Saudi Arabia
Get a Quote for the SKF UC 215 Bearing Unit
We respond within 4 business hours. Send model UC 215 for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — UC 215
Common questions from buyers in Saudi Arabia and the GCC
What is the SKF UC 215 Bearing Unit (UC 215) and what is it used for?
SKF Y-bearings are single-row deep groove ball bearings fitted with an extended inner ring and a convex, sphered outer ring surface, letting them seat directly into a matching housing and compensate for modest initial shaft misalignment. The extended inner ring locks straight onto a plain commercial shaft, most commonly through two grub screws as in the YAR 204-2F or through UC-type set-screw inserts, so there is no need for adapter sleeves or shoulders. Combined with pillow block housings such as UCP 205 or SY 25 TF, four-bolt flanged units like UCF and FY 30 TF, or two-bolt oval FYTB flanges, they form ready-to-mount units for light and medium duty machinery. Housings are supplied in grey cast iron or lightweight corrosion-resistant composite, and most inserts carry integral seals with flingers plus a relubrication groove and grease fitting for extended service in dusty or washdown environments. Across Saudi Arabia these units keep grain and date-processing conveyors, poultry and food plant lines, irrigation pumps, ventilation fans and cement bagging equipment running despite heat, dust and frequent washdowns. Key specifications for UC 215: d 75 mm Bore diameter; B 73.3 mm Width of inner ring; Bore diameter 75 mm; Outside diameter 130 mm; Basic dynamic load rating 66.3 kN; Basic static load rating 49 kN. UC 215 is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Where can I buy the SKF UC 215 in Saudi Arabia?
Razz Middle East supplies genuine SKF products including the SKF UC 215 Bearing Unit (UC 215) across all regions of Saudi Arabia — Riyadh, Jeddah, Dammam, Al Khobar, Jubail, Yanbu, Mecca, and Medina. We source fast-moving items to order and can source specialist configurations. Request a quote on this page for same-day pricing.
How do I get the best price for the UC 215 in KSA?
Click "Request Free Quote" on this page or message us the model number UC 215 on WhatsApp. Our technical sales team responds within 4 business hours with a competitive price in SAR and a confirmed delivery lead time — with no hidden charges or handling fees.
Does Razz Middle East supply genuine SKF products in Saudi Arabia?
Yes. Razz Middle East is an independent industrial supplier, not an appointed SKF distributor. We source through SKF OEM channels or through authorised SKF distributor channels and supply 100% genuine product with full manufacturer warranty and documentation, serving the oil & gas, petrochemical, power generation, water, construction and manufacturing sectors across the Kingdom.
What is the delivery lead time for the SKF UC 215 Bearing Unit in Saudi Arabia?
Items are sourced to order and delivered duty-paid, typically 2-3 weeks, to Riyadh, Dammam, Jeddah and the Eastern Province. Project orders and non-standard configurations can take longer. Contact us with the exact model number UC 215 to confirm the lead time for your quantity.
Can the UC 215 be supplied for industrial projects in KSA?
Yes. Razz Middle East is an approved vendor to SABIC, Ma'aden, Sadara, Saudi Energy, ACWA Power, Safari Group and others. For project orders we provide the manufacturer's technical documentation and certificates of conformity for your vendor approval file. Contact our project team with your project specification.