Image for illustration purposes only. Actual product may vary in appearance.
SKF
SKF UCFL 208 Bearing Unit
Model: UCFL 208
Price: Ex-Works (EXW) India — shipping & customs duty billed separately at actual cost.
Payment by bank transfer · Order confirmed within 4 business hours
You May Also Need
SKF UCFL 210 Bearing Unit
UCFL 210
SKF UCP 204 Bearing Unit
UCP 204
SKF UCP 205 Bearing Unit
UCP 205
SKF UCP 205-14 Bearing Unit
UCP 205-14
SKF UCP 205-15 Bearing Unit
UCP 205-15
SKF UCP 205-16 Bearing Unit
UCP 205-16
SKF UCP 206 Bearing Unit
UCP 206
SKF UCP 206-18 Bearing Unit
UCP 206-18
4-hour response · Pricing in SAR · Delivery across all KSA regions
SKF UCFL 208 Bearing Unit
SKF Y-bearings are single-row deep groove ball bearings fitted with an extended inner ring and a convex, sphered outer ring surface, letting them seat directly into a matching housing and compensate for modest initial shaft misalignment. The extended inner ring locks straight onto a plain commercial shaft, most commonly through two grub screws as in the YAR 204-2F or through UC-type set-screw inserts, so there is no need for adapter sleeves or shoulders. Combined with pillow block housings such as UCP 205 or SY 25 TF, four-bolt flanged units like UCF and FY 30 TF, or two-bolt oval FYTB flanges, they form ready-to-mount units for light and medium duty machinery. Housings are supplied in grey cast iron or lightweight corrosion-resistant composite, and most inserts carry integral seals with flingers plus a relubrication groove and grease fitting for extended service in dusty or washdown environments. Across Saudi Arabia these units keep grain and date-processing conveyors, poultry and food plant lines, irrigation pumps, ventilation fans and cement bagging equipment running despite heat, dust and frequent washdowns. Key specifications for UCFL 208: d 40 mm Bore diameter; B 49.2 mm Width of inner ring; Basic dynamic load rating 32.5 kN; Basic static load rating 20 kN; Limiting speed 3 750 r/min; Material, bearing Bearing steel. UCFL 208 is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Technical Specifications
Full specifications for the UCFL 208
- Shaft diameter
- 40 mm
- Housing overall width
- 34 mm
- Width, total
- 51.2 mm
- Centre distance between bolt holes
- 144 mm
- Bearing width, total
- 49.2 mm
- Attachment bolt diameter
- 14 mm
- Basic dynamic load rating
- 32.5 kN
- Basic static load rating
- 20 kN
- Limiting speed
- 3 750 r/min
- Note
- Limiting speed with shaft tolerance h6
- Housing type
- Flanged
- Flanged housing type
- Oval
- Number of bolt holes for fasteners
- 2
- Fastening bolt hole type
- Plain
- Retaining feature, inner ring
- Set screws
- Bore type
- Cylindrical
- Rubber seating ring
- Without
- Material, housing
- Cast iron
- Material, bearing
- Bearing steel
- Coating
- Without
- Sealing, bearing
- Seal and flinger on both sides
- Sealing type
- Contact, standard
- Sealing, unit
- Optional end cover
- Lubricant
- Grease
- Relubrication hole
- With
- Grease fitting
- With
- Product net weight
- 1.56 kg
- eClass code
- 23-05-16-02
- UNSPSC code
- 31171536
- Compliance with standard
- JIS
- Purpose specific
- For material handling applications
- Sealing type, bearing
- Contact, standard
- d
- 40 mm Bore diameter
- d1
- ≈ 52.5 mm Outer diameter of inner ring
- A
- 34 mm Width of housing
- A1
- 14 mm Flange width
- A5
- 26 mm Width including end cover
- B
- 49.2 mm Width of inner ring
- B4
- 8 mm Distance from locking device side face to thread centre
- Db1
- 100 mm Top external diameter
Key Features & Benefits
- Sphered outer ring seats in matching housing to absorb initial misalignment
- Set-screw (grub screw) or eccentric collar locking directly on plain shafts
- Integral contact seals with flingers keep out dust and moisture
- Relubrication groove and grease nipple on most insert and unit designs
- Housings available in cast iron or hygienic corrosion-resistant composite
- Supplied ready-greased and ready-to-mount, cutting installation time
Industrial Applications in Saudi Arabia
- Belt and roller conveyors in bulk handling
- Agricultural machinery and grain handling equipment
- Food and beverage processing lines
- Ventilation fans and air handling units
- Textile and packaging machinery
- Water treatment screens and screw equipment
Industrial Supplier in Saudi Arabia
Get a Quote for the SKF UCFL 208 Bearing Unit
We respond within 4 business hours. Send model UCFL 208 for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — UCFL 208
Common questions from buyers in Saudi Arabia and the GCC
What is the SKF UCFL 208 Bearing Unit (UCFL 208) and what is it used for?
SKF Y-bearings are single-row deep groove ball bearings fitted with an extended inner ring and a convex, sphered outer ring surface, letting them seat directly into a matching housing and compensate for modest initial shaft misalignment. The extended inner ring locks straight onto a plain commercial shaft, most commonly through two grub screws as in the YAR 204-2F or through UC-type set-screw inserts, so there is no need for adapter sleeves or shoulders. Combined with pillow block housings such as UCP 205 or SY 25 TF, four-bolt flanged units like UCF and FY 30 TF, or two-bolt oval FYTB flanges, they form ready-to-mount units for light and medium duty machinery. Housings are supplied in grey cast iron or lightweight corrosion-resistant composite, and most inserts carry integral seals with flingers plus a relubrication groove and grease fitting for extended service in dusty or washdown environments. Across Saudi Arabia these units keep grain and date-processing conveyors, poultry and food plant lines, irrigation pumps, ventilation fans and cement bagging equipment running despite heat, dust and frequent washdowns. Key specifications for UCFL 208: d 40 mm Bore diameter; B 49.2 mm Width of inner ring; Basic dynamic load rating 32.5 kN; Basic static load rating 20 kN; Limiting speed 3 750 r/min; Material, bearing Bearing steel. UCFL 208 is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Where can I buy the SKF UCFL 208 in Saudi Arabia?
Razz Middle East supplies genuine SKF products including the SKF UCFL 208 Bearing Unit (UCFL 208) across all regions of Saudi Arabia — Riyadh, Jeddah, Dammam, Al Khobar, Jubail, Yanbu, Mecca, and Medina. We source fast-moving items to order and can source specialist configurations. Request a quote on this page for same-day pricing.
How do I get the best price for the UCFL 208 in KSA?
Click "Request Free Quote" on this page or message us the model number UCFL 208 on WhatsApp. Our technical sales team responds within 4 business hours with a competitive price in SAR, confirmed availability and delivery lead time — with no hidden charges or handling fees.
Is Razz Middle East an authorized SKF supplier in Saudi Arabia?
Razz Middle East is a specialist industrial equipment supplier in Saudi Arabia focused on SKF and other leading global brands. We supply 100% genuine OEM products backed by full manufacturer warranty, serving the oil & gas, petrochemical, power generation, water, construction, and manufacturing sectors across the Kingdom.
What is the delivery lead time for the SKF UCFL 208 Bearing Unit in Saudi Arabia?
In-stock items typically ship within 24-48 hours to Riyadh, Dammam, Jeddah, and the Eastern Province. Project orders and non-standard configurations generally take 2-6 weeks. Contact us with the exact model number UCFL 208 for a precise availability confirmation and delivery date.
Can the UCFL 208 be supplied for ARAMCO, SABIC, or NEOM projects in KSA?
Yes. Razz Middle East has experience supplying SKF equipment to major industrial projects and EPC contractors across Saudi Arabia. We can provide full technical documentation, Material Inspection Reports (MIR), and certificates of conformity to meet vendor approval requirements. Contact our project team to discuss your specific project requirements.