Image for illustration purposes only. Actual product may vary in appearance.
SKF
SKF UCP 208 Bearing Unit
Model: UCP 208
4-hour response · Pricing in SAR · Delivery across all KSA regions
SKF UCP 208 Bearing Unit
SKF bearing units combine an insert bearing — a deep groove or self-aligning ball bearing with an extended inner ring and a locking collar or grub screws — with a cast housing in pillow block, flanged or take-up form, so the whole assembly bolts straight onto a machine frame without any separate housing design or bearing fitting work. The self-aligning outer ring compensates for initial misalignment between the housing mounting faces and the shaft, and the locking collar clamps the extended inner ring directly onto the shaft without an interference fit. Bearing units are the fastest way to add shaft support on conveyor systems, agitators and light industrial machinery across Saudi manufacturing and material-handling plants, where a bolt-on pillow block or flange unit replaces what would otherwise require a custom housing design. Key specifications for UCP 208: d 40 mm Bore diameter; B 49.2 mm Width of inner ring; Basic dynamic load rating 32.5 kN; Basic static load rating 20 kN; Limiting speed 3 750 r/min; Material, bearing Bearing steel. UCP 208 is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Technical Specifications
Full specifications for the UCP 208
- Shaft diameter
- 40 mm
- Centre height (pillow block)
- 49.2 mm
- Housing overall width
- 49 mm
- Centre distance between bolt holes
- 137 mm
- Bearing width, total
- 49.2 mm
- Attachment bolt diameter
- 14 mm
- Basic dynamic load rating
- 32.5 kN
- Basic static load rating
- 20 kN
- Limiting speed
- 3 750 r/min
- Note
- Limiting speed with shaft tolerance h6
- Housing type
- Pillow block, normal base
- Number of bolt holes for fasteners
- 2
- Fastening bolt hole type
- Plain
- Retaining feature, inner ring
- Set screws
- Bore type
- Cylindrical
- Rubber seating ring
- Without
- Material, housing
- Cast iron
- Material, bearing
- Bearing steel
- Coating
- Without
- Sealing, bearing
- Seal and flinger on both sides
- Sealing type
- Contact, standard
- Sealing, unit
- Without
- Lubricant
- Grease
- Relubrication hole
- With
- Grease fitting
- With
- Product net weight
- 2.14 kg
- eClass code
- 23-05-16-02
- UNSPSC code
- 31171536
- Compliance with standard
- JIS
- Purpose specific
- For material handling applications
- Sealing type, bearing
- Contact, standard
- d
- 40 mm Bore diameter
- d1
- ≈ 52.5 mm Shoulder diameter of inner ring
- A
- 49 mm Base width
- A1
- 30 mm Top width
- B
- 49.2 mm Width of inner ring
- B4
- 8 mm Distance from locking device side face to thread centre
- H
- 49.2 mm Height of spherical seat centre
- H1
- 20.5 mm Foot height
- H2
- 101 mm Overall height
Key Features & Benefits
- Self-aligning outer ring accommodates initial misalignment
- Locking collar or grub screws secure the shaft without an interference fit
- Pillow block, flanged and take-up housing styles for different mounting needs
- Pre-greased and sealed for maintenance-free operation in many variants
- Cast iron housings for industrial-duty load capacity
- Bolt-on installation with no separate bearing fitting required
Industrial Applications in Saudi Arabia
- Conveyor idler and drive shaft support
- Agricultural and material-handling machinery
- Light-duty industrial fans and blowers
- Packaging and food-processing equipment
- Agitator and mixer shaft support
- General-purpose shaft mounting in fabricated frames
Industrial Supplier in Saudi Arabia
Get a Quote for the SKF UCP 208 Bearing Unit
We respond within 4 business hours. Send model UCP 208 for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — UCP 208
Common questions from buyers in Saudi Arabia and the GCC
What is the SKF UCP 208 Bearing Unit (UCP 208) and what is it used for?
SKF bearing units combine an insert bearing — a deep groove or self-aligning ball bearing with an extended inner ring and a locking collar or grub screws — with a cast housing in pillow block, flanged or take-up form, so the whole assembly bolts straight onto a machine frame without any separate housing design or bearing fitting work. The self-aligning outer ring compensates for initial misalignment between the housing mounting faces and the shaft, and the locking collar clamps the extended inner ring directly onto the shaft without an interference fit. Bearing units are the fastest way to add shaft support on conveyor systems, agitators and light industrial machinery across Saudi manufacturing and material-handling plants, where a bolt-on pillow block or flange unit replaces what would otherwise require a custom housing design. Key specifications for UCP 208: d 40 mm Bore diameter; B 49.2 mm Width of inner ring; Basic dynamic load rating 32.5 kN; Basic static load rating 20 kN; Limiting speed 3 750 r/min; Material, bearing Bearing steel. UCP 208 is available from Razz Middle East in Jeddah, Saudi Arabia, with GCC-wide delivery and a 4-hour RFQ response.
Where can I buy the SKF UCP 208 in Saudi Arabia?
Razz Middle East supplies genuine SKF products including the SKF UCP 208 Bearing Unit (UCP 208) across all regions of Saudi Arabia — Riyadh, Jeddah, Dammam, Al Khobar, Jubail, Yanbu, Mecca, and Medina. We source fast-moving items to order and can source specialist configurations. Request a quote on this page for same-day pricing.
How do I get the best price for the UCP 208 in KSA?
Click "Request Free Quote" on this page or message us the model number UCP 208 on WhatsApp. Our technical sales team responds within 4 business hours with a competitive price in SAR and a confirmed delivery lead time — with no hidden charges or handling fees.
Does Razz Middle East supply genuine SKF products in Saudi Arabia?
Yes. Razz Middle East is an independent industrial supplier, not an appointed SKF distributor. We source through SKF OEM channels or through authorised SKF distributor channels and supply 100% genuine product with full manufacturer warranty and documentation, serving the oil & gas, petrochemical, power generation, water, construction and manufacturing sectors across the Kingdom.
What is the delivery lead time for the SKF UCP 208 Bearing Unit in Saudi Arabia?
Items are sourced to order and delivered duty-paid, typically 2-3 weeks, to Riyadh, Dammam, Jeddah and the Eastern Province. Project orders and non-standard configurations can take longer. Contact us with the exact model number UCP 208 to confirm the lead time for your quantity.
Can the UCP 208 be supplied for industrial projects in KSA?
Yes. Razz Middle East is an approved vendor to SABIC, Ma'aden, Sadara, Saudi Energy, ACWA Power, Safari Group and others. For project orders we provide the manufacturer's technical documentation and certificates of conformity for your vendor approval file. Contact our project team with your project specification.