Timken 74851CD Timken Tapered Roller Bearings

Razz supplies Timken tapered roller bearings in Saudi Arabia, sourced to order from the manufacturer's bearing range. These bearings support combined radial and thrust loads on rotating shafts. Orders are quoted against the customer's exact part number and delivered duty-paid to site, typically within three weeks.

Timken 74851CD

This page covers Timken part number 74851CD — Timken Tapered Roller Bearings. Quote the full part number with your enquiry and the item is unambiguous: one part number identifies one exact product variant, including options that are not visible in the description.

About Timken Tapered Roller Bearings

Timken is a long-established manufacturer of tapered roller bearings, which use conical rollers running between an inner cone and outer cup to carry combined radial and axial (thrust) load, common on wheel hubs, gearbox shafts, pumps and heavy rotating machinery where a shaft experiences load in more than one direction. Tapered bearings are supplied as a matched cone-and-cup pair, and the two components are always ordered and installed together rather than mixed with a component from a different manufacturer, since the taper angle and fit tolerance between the two are matched at manufacture. The part number, following the standard bearing numbering convention Timken and other manufacturers largely share, identifies bore diameter, outer diameter and width, and this is read directly off the bearing being replaced or the equipment's parts manual.

Timken Tapered Roller Bearings in Saudi Arabia

Tapered roller bearings of this type are used in gearboxes, pump shafts, conveyor rollers and heavy rotating machinery across Saudi cement, mining, steel and general manufacturing facilities, wherever a shaft carries both radial and thrust load together, including heavy-industry equipment at Jubail, Yanbu and Ma'aden operations. Timken bearings are sourced here mainly to replace a worn bearing during scheduled maintenance, matched to the exact bore, outer diameter and width dimensions of the original.

Ordering and lead time

Quote the full Timken part number stamped on the bearing (cone and cup numbers), or bore diameter, outer diameter and width measured off the original — the cone and cup are ordered together as a matched pair. Razz sources each unit on order from Timken's supply chain; no local stock is held, and lead time is typically three weeks from confirmed order to delivery in KSA, DDP.

Specifications are taken from the supplier's published catalogue data. Confirm against the manufacturer's current datasheet before ordering.