Grundfos logo
SP 17A-25

Product image coming soon

Grundfos

Grundfos SP 17A-25 Deep-Well Submersible Pump 6"

Model: SP 17A-25

Flow Rate: 8–20 m³/hHead: Up to 262 m (25 stages)Borehole Diameter: 6" (min. 152 mm)Motor Power: 4–7.5 kW
Available — Ships within Saudi Arabia
WhatsApp

4-hour response · Pricing in SAR · Delivery across all KSA regions

Genuine OEM Products
4-Hour RFQ Response
KSA-Wide Delivery
Full Technical Support

SP 17A-25 — Grundfos SP 17A-25 Deep-Well Submersible Pump 6"

The Grundfos SP 17A-25 is a 6-inch borehole submersible pump delivering 17 m³/h at up to 262 m total dynamic head through 25 stages, positioned at the high-flow end of the SP range for municipal, industrial, and large-scale agricultural groundwater duties in Saudi Arabia. The 6-inch format accommodates the larger motor sizes (4–7.5 kW) needed to achieve this flow and head combination without exceeding the recommended borehole wall velocity for sediment draw — a critical hydraulic constraint in Saudi Arabia's deep gravel-lined boreholes where exceeding 0.3 m/s wall velocity accelerates gravel pack collapse. The SP 17A-25's hydraulic design incorporates Grundfos's radial bearing above each stage, which absorbs the side-thrust from asymmetric inflow in inclined or misaligned boreholes, preventing premature shaft wear that is a common failure mode in sandy aquifer conditions.

The SP 17A series motor is an eight-pole water-cooled hermetically sealed unit rated for continuous S1 duty at temperatures up to 40°C water, with a Class F insulation system providing thermal reserve for operation at water temperatures reaching 35°C commonly found in shallow Saudi aquifers during summer months. The pump and motor stainless steel connection joint uses Grundfos's patented MPS (motor-pump connection sleeve) system, which maintains perfect axial alignment between motor and pump shaft without adjustment tools, eliminating misalignment-induced bearing failure in the field — a significant advantage over competitor units where field joint alignment is technician-skill-dependent. The complete stainless steel outer column and motor housing resist the chloride-driven corrosion that affects carbon steel submersible pumps in Saudi Arabia's saline coastal aquifers.

In Saudi Arabia's water infrastructure landscape, the SP 17A-25 and comparable SP 17A units are specified for SWCC's inland brackish water treatment plant borehole intake fields, where arrays of six to twelve 6-inch submersible pumps feed water to reverse osmosis pre-treatment trains. Saudi Ministry of Environment, Water and Agriculture (MEWA) borehole projects for rural water supply in Hail, Al-Qassim, and Al-Jouf provinces specify the SP 17A range for its combination of high flow, sand resistance, and proven reliability in the arid conditions of the Najd plateau. Major Saudi date palm cultivation operations in Al-Ahsa, Al-Qatif, and Al-Madinah regions rely on SP 17A pump arrays for groundwater extraction at flow rates that can justify the larger 6-inch borehole construction cost, typically extracting from the Umm Er Radhuma limestone aquifer system at depths of 200–400 m.

Razz Middle East supplies the Grundfos SP 17A-25 with full borehole pump set packages including submersible cable, rising main, and Grundfos CU301 or CU354 control units with dry-running protection, motor temperature monitoring, and remote GSM telemetry for unattended agricultural and municipal pumping stations. We provide hydraulic borehole pump selection services and maintain regional field service capability for SP pump installation, commissioning, and retrieval across Saudi Arabia's main agricultural regions.

Technical Specifications

Full specifications for the SP 17A-25

Flow Rate
8–20 m³/h
Head
Up to 262 m (25 stages)
Borehole Diameter
6" (min. 152 mm)
Motor Power
4–7.5 kW
Shaft/Bowl Material
AISI 304 stainless steel
Max Sand Content
50 g/m³
Motor Cooling
Water-cooled hermetically sealed
Max Fluid Temperature
40°C

Key Features & Benefits

  • Twenty-five stage AISI 304 stainless steel construction delivers 17 m³/h at up to 262 m TDH, covering the full depth range of Saudi Arabia's deep Umm Er Radhuma, Wajid, and Saq aquifer boreholes from 100 m to 400 m.
  • Radial interstage bearing above each stage absorbs side-thrust from inclined or misaligned boreholes, preventing shaft wear in the sandy aquifer conditions prevalent across Saudi Arabia's central and eastern agricultural regions.
  • Grundfos MPS motor-pump connection sleeve system ensures perfect axial alignment without adjustment tools in the field, eliminating misalignment-induced premature bearing failure common with competitor submersible pump joints.
  • Full AISI 304 stainless steel outer column and motor housing resists chloride-driven corrosion in Saudi Arabia's saline coastal and brackish aquifer conditions, extending service life beyond 10 years under typical duty cycles.
  • Compatible with Grundfos CU301 and CU354 control units providing dry-running protection, motor temperature monitoring, and remote GSM/GPRS telemetry for unattended management of remote agricultural and municipal pumping stations.
  • Eight-pole water-cooled motor with Class F insulation handles up to 40°C water temperature, accommodating the warm shallow aquifer conditions encountered in Saudi Arabia's summer months without motor derating.

Industrial Applications in Saudi Arabia

  • SWCC inland brackish water treatment plant borehole intake fields, where arrays of SP 17A-25 pumps feed brackish groundwater to reverse osmosis pre-treatment trains at flow rates sufficient for mid-capacity RO plant feed duties.
  • Saudi MEWA rural water supply borehole projects in Hail, Al-Qassim, and Al-Jouf provinces, where the SP 17A-25's high sand resistance and remote monitoring compatibility enables unattended operation of distributed borehole pump stations.
  • Large-scale date palm, alfalfa, and vegetable irrigation borehole supply in Al-Ahsa, Al-Qatif, and Al-Madinah regions, where the SP 17A-25's flow capacity justifies 6-inch borehole construction for high-volume seasonal irrigation extraction.
  • Industrial process water supply boreholes at remote manufacturing facilities and mining operations in Saudi Arabia's interior regions, where the submersible format eliminates above-ground pump house construction requirements.
  • Saudi Aramco community development agricultural water supply programmes, where SP 17A series pumps extract groundwater from Wajid and Saq aquifer boreholes at depths of 200–400 m to supply regional agricultural development initiatives.

Industrial Supplier in Saudi Arabia

Get a Quote for the Grundfos SP 17A-25 Deep-Well Submersible Pump 6"

We respond within 4 business hours. Send model SP 17A-25 for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.

WhatsApp

Frequently Asked Questions — SP 17A-25

Common questions from buyers in Saudi Arabia and the GCC