Panduit CD22 Slotted Wiring Duct 50×50mm

The Panduit CD2X2WH6 is a 50 mm wide by 50 mm deep slotted-wall PVC wiring duct manufactured to IEC 61084-1 and UL 870, specifically designed for medium-density control panel wiring where frequent field access and orderly conductor dressing are equally important. The slotted side walls — featuring rectangular openings spaced at regular pitch along the full length of the duct — allow individual conductors and cable bundles to exit the duct at virtually any position without the need to cut or notch the duct body, dramatically reducing the labour time required when wiring complex relay racks, terminal strip assemblies, and PLC I/O subracks in industrial control panels. The matching slotted cover snaps on and off without tools for easy inspection and rewiring during maintenance shutdowns.

The CD2X2WH6 is the most frequently specified wiring duct size for sub-panel wiring zones in Saudi Arabia's industrial automation panels. Aramco SAES-J-902 and the company's panel engineering standard GI-0002 require that all low-voltage instrument wiring be run in covered wiring ducts, and the 50 mm × 50 mm slotted CD22 is the workhorse size used between terminal strip rows and I/O module racks in typical Aramco-standard DCS sub-panels. SABIC's Jubail Engineering Centre specifies the same size for their standard PLC panel designs, and SEC-registered panel shops throughout Dammam, Riyadh, and Jeddah rely on the CD22 for distribution board and control panel secondary wiring. The self-extinguishing UL94-V0 PVC compound ensures compliance with IEC 61439-2 clause 8.4 fire performance requirements for low-voltage switchgear assemblies.

The slotted design is particularly valuable in panel commissioning and maintenance environments where conductors need to be traced, re-labelled, or replaced without disturbing adjacent circuits. In the context of Saudi Vision 2030 mega-projects — particularly NEOM's Sindalah island, the Red Sea Project resort infrastructure, and Qiddiya entertainment city — the electrical control rooms contain hundreds of instrumentation and BMS panels where tidy, accessible wiring is a contractual quality requirement enforced by the project management consultants. The CD2X2WH6 with its snap-fit cover and slot-wall egress meets these requirements while keeping conductor identification visible without opening the duct.

Razz Middle East holds the CD2X2WH6 in continuous local stock alongside the full Panduit CD-series fittings range. Our in-house panel-build support team assists engineering contractors and EPC firms across Saudi Arabia with material schedules, cut-list optimisation, and Panduit system documentation in both English and Arabic.