Panduit LD10 Wiring Duct 100×100mm

The Panduit LD10X10W6 is a 100 mm wide by 100 mm deep solid-wall PVC wiring duct, engineered to the stringent requirements of IEC 61084-1 and UL 870 for industrial cable management in high-density control panels and switchgear enclosures. Fabricated from rigid, self-extinguishing PVC compound rated UL94-V0 for flame retardancy, the LD10 provides a fully enclosed cable routing pathway that protects conductors from mechanical damage, vibration, and the ingress of oils and contaminants common in petrochemical plant environments. The smooth interior bore and radiused base corners allow conductors to slide easily during installation without abrasion of the insulation jacket, and the continuous slot pattern on the cover permits cable egress at any point along the duct run — a critical advantage in control panels where field changes require rerouting without cutting the duct.

In Saudi Aramco control panel and marshalling cabinet applications, the LD10 wiring duct is the standard cable management component specified under GI-0002 and SAES-J-902, which mandate colour-coded segregation of power, signal, and instrumentation cables. At 100 mm × 100 mm, the LD10 is the preferred size for main trunk routes in large DCS and PLC panels where hundreds of instrument loop cables must be bundled and identified. Aramco-approved panel builders in Dammam, Al Jubail, and Ras Tanura regularly use this duct to achieve the tidy, audit-ready wiring layouts demanded during Aramco third-party inspection and pre-commissioning checks. SABIC's Jubail and Yanbu facilities impose similarly exacting wiring duct standards in their control room panels, and the LD10 satisfies SABIC's specification for PVC duct dimensions and flame-retardancy ratings.

The LD10X10W6 is supplied in 6-foot (approximately 1.83 m) sticks that snap together with Panduit's interlocking joint system, enabling straight runs of any length without tools or adhesives. The matching LD10 inside-corner, outside-corner, T-fitting, and reducer fittings allow complex panel layouts to be built with a fully mitred, professional finish that meets IEC 61439-2 switchgear assembly requirements. The rigid wall construction withstands the compressive loads that occur when heavy cable bundles are routed through floor penetrations or behind cable trays, and the UL94-V0 PVC compound provides reliable arc-track resistance in the event of an insulation fault inside the duct — a fire-safety feature required by Vision 2030 smart-city infrastructure specifications for NEOM and the Red Sea Project's electrical distribution rooms.

Razz Middle East stocks the full LD10 system — ducts, covers, and all fittings — in Riyadh and Dammam, with 24-hour delivery to major industrial sites across the Kingdom. Our applications engineers assist Saudi panel-builder workshops with material take-offs, and we provide official Panduit product data sheets and test certificates in Arabic and English to support SASO and Aramco materials receiving inspection.