Schneider Electric
Schneider Preventa XPSE Emergency Stop Safety Relay
Model: XPSE3710
4-hour response · Pricing in SAR · Delivery across all KSA regions
Schneider Preventa XPSE Emergency Stop Safety Relay
The Schneider Electric Preventa XPSE is a dedicated emergency stop safety relay module providing category 3 / PL d or category 4 / PL e machine safety stop function for emergency stop buttons, gate switches, and enabling switches in compliance with EN ISO 13849-1 and IEC 62061 machinery safety standards. The XPSE monitors dual-channel input wiring from emergency stop devices, detects single-fault conditions — open circuit, short circuit, and cross-fault between channels — and provides three safety output relay contacts rated at 6 A / 250 V AC for direct connection to motor contactor coils, variable speed drive enable terminals, or power supply disconnect inputs. Manual or auto-restart modes satisfy the EN ISO 13849-1 requirements for different machine risk assessment categories without additional wiring.
The XPSE's spring-clamp push-in terminals accept 0.2–2.5 mm² wire without tools, and the module's 22.5 mm width allows dense safety relay mounting in compact machine panels. The 24 V DC coil supply covers the standard safety circuit voltage used in Saudi OEM machine panels, and the module's LED status indicators (power, input channel 1, input channel 2, output) enable rapid fault diagnosis without a multimeter. A cross-fault detection sensitivity of 10 kΩ reliably identifies the wiring cross-faults that occur in long cable runs on large machine installations — a common issue in Saudi Arabia's large industrial plant machine panels where cable runs can exceed 50 m.
In Saudi Arabia, Preventa XPSE safety relays are specified in machine panel designs for Saudi manufacturing facilities requiring CE marking for export, SASO-compliant industrial machinery for domestic use, and equipment installed in ARAMCO and SABIC facilities that require IEC 62061 SIL certification documentation. The Kingdom's growing OEM machinery sector — supported by NIDLP incentives for domestic manufacturing — is increasingly required to document machine safety compliance, driving adoption of dedicated safety relay hardware in place of legacy standard relay implementations.
Razz Middle East stocks Preventa XPSE in 1NC+3NO output configurations for immediate delivery across Saudi Arabia. We provide safety circuit engineering consultation, EN ISO 13849-1 category verification calculations, and complete safety relay wiring documentation for Saudi machine builders, system integrators, and industrial facilities undergoing ARAMCO and SABIC HSE audit compliance programmes.
Technical Specifications
Full specifications for the XPSE3710
- Safety Category
- Cat. 3 / PLd or Cat. 4 / PLe
- Standard
- EN ISO 13849-1, IEC 62061
- Input
- Dual-channel, 24 V DC
- Fault Detection
- Open circuit, short circuit, cross-fault
- Outputs
- 3 NO + 1 NC safety relay contacts
- Output Rating
- 6 A / 250 V AC
- Restart
- Manual or automatic
- Width
- 22.5 mm DIN rail
Key Features & Benefits
- Dual-channel input monitoring with cross-fault detection sensitivity of 10 kΩ reliably identifies wiring faults on long cable runs in large Saudi industrial machine panels without nuisance false trips.
- Three 6 A / 250 V AC safety output contacts directly drive motor contactors, VFD enable terminals, and power supply inputs without intermediate relays, simplifying safety circuit wiring.
- Manual or auto-restart mode selection satisfies EN ISO 13849-1 requirements for different machine risk assessment outcomes without hardware changes or additional wiring.
- 22.5 mm width allows up to 18 XPSE modules per 400 mm DIN rail — the highest density safety relay installation for multi-axis machines with individual E-stop zones.
- LED status indicators for power, channel 1, channel 2, and output state enable rapid fault localisation by site technicians without measurement tools, reducing machine downtime at Saudi industrial facilities.
- Spring-clamp push-in terminals for 0.2–2.5 mm² wire accept both solid and stranded conductors without tools, reducing panel wiring time for machine builders assembling multiple units.
- 24 V DC coil supply is compatible with standard PLC and safety controller output modules, enabling direct integration into Modicon M221/M241 safety-rated digital output channels.
Industrial Applications in Saudi Arabia
- CE-marking machine panel emergency stop safety circuits for Saudi OEM machine builders exporting equipment to GCC and international markets requiring EN ISO 13849-1 compliance documentation.
- ARAMCO and SABIC facility machine safety upgrade projects where IEC 62061 SIL 2 certification is required for new and retrofitted process machinery under HSE management system audits.
- Packaging line and conveyor guarding safety relay for food and beverage manufacturers in MODON industrial zones, where safety gate monitoring satisfies Saudi Labour Ministry workplace safety regulations.
- Robotic work cell safety perimeter guarding for automation projects at NEOM advanced manufacturing zone and Saudi industrial technology demonstration facilities.
- Press and stamping machine safety circuit for Saudi metal fabrication and automotive component manufacturers, where dual-channel E-stop monitoring is mandatory under machinery directive requirements.
- HVAC plant room access interlocking safety relay for commercial building plant rooms, where fan start interlocking with access gates prevents personnel injury during maintenance.
- Crane and overhead hoist safety relay for emergency stop circuits at Saudi Aramco, Ma'aden, and SABIC facility crane systems, where Cat. 4 / PLe is required by crane safety standard EN 13001.
Industrial Supplier in Saudi Arabia
Get a Quote for the Schneider Preventa XPSE Emergency Stop Safety Relay
We respond within 4 business hours. Send model XPSE3710 for competitive pricing in SAR with delivery across Saudi Arabia and the GCC.
Frequently Asked Questions — XPSE3710
Common questions from buyers in Saudi Arabia and the GCC
What is the Schneider Preventa XPSE Emergency Stop Safety Relay (XPSE3710) and what is it used for?
The Schneider Electric Preventa XPSE is a dedicated emergency stop safety relay module providing category 3 / PL d or category 4 / PL e machine safety stop function for emergency stop buttons, gate switches, and enabling switches in compliance with EN ISO 13849-1 and IEC 62061 machinery safety standards. The XPSE monitors dual-channel input wiring from emergency stop devices, detects single-fault conditions — open circuit, short circuit, and cross-fault between channels — and provides three safety output relay contacts rated at 6 A / 250 V AC for direct connection to motor contactor coils, variable speed drive enable terminals, or power supply disconnect inputs. Manual or auto-restart modes satisfy the EN ISO 13849-1 requirements for different machine risk assessment categories without additional wiring.
Where can I buy the Schneider Electric XPSE3710 in Saudi Arabia?
Razz Middle East supplies genuine Schneider Electric products including the Schneider Preventa XPSE Emergency Stop Safety Relay (XPSE3710) across all regions of Saudi Arabia — Riyadh, Jeddah, Dammam, Al Khobar, Jubail, Yanbu, Mecca, and Medina. We maintain local stock on fast-moving items and can source specialist configurations. Request a quote on this page for same-day pricing.
How do I get the best price for the XPSE3710 in KSA?
Click "Request Free Quote" on this page or message us the model number XPSE3710 on WhatsApp. Our technical sales team responds within 4 business hours with a competitive price in SAR, confirmed stock availability, and delivery lead time — with no hidden charges or handling fees.
Is Razz Middle East an authorized Schneider Electric supplier in Saudi Arabia?
Razz Middle East is a specialist industrial equipment supplier in Saudi Arabia focused on Schneider Electric and other leading global brands. We supply 100% genuine OEM products backed by full manufacturer warranty, serving the oil & gas, petrochemical, power generation, water, construction, and manufacturing sectors across the Kingdom.
What is the delivery lead time for the Schneider Preventa XPSE Emergency Stop Safety Relay in Saudi Arabia?
In-stock items typically ship within 24-48 hours to Riyadh, Dammam, Jeddah, and the Eastern Province. Project orders and non-standard configurations generally take 2-6 weeks. Contact us with the exact model number XPSE3710 for a precise availability confirmation and delivery date.
Can the XPSE3710 be supplied for ARAMCO, SABIC, or NEOM projects in KSA?
Yes. Razz Middle East has experience supplying Schneider Electric equipment to major industrial projects and EPC contractors across Saudi Arabia. We can provide full technical documentation, Material Inspection Reports (MIR), and certificates of conformity to meet vendor approval requirements. Contact our project team to discuss your specific project requirements.
More Schneider Electric Products
Schneider Electric PrismaSeT G Modular Panelboard
LVS03506
Schneider Electric PrismaSeT P Low Voltage Switchboard
LVS08501
Schneider Electric TeSys Island IoT Motor Starter Controller
LU9MR1
Schneider RM6 24 kV Compact MV Ring Main Unit
RM6-3
Schneider Electric S520059 Odace 16A 2P socket outlet (White)
S520059
Schneider Electric S520059S Odace 16A 2P+E socket (Aluminium)
S520059S