FAG 6208-C3 Deep Groove Ball Bearing

The FAG 6208-C3 deep groove ball bearing is one of the most widely deployed single-row ball bearings in Saudi Arabia's rotating equipment inventory, serving as the standard general-purpose bearing for electric motors, pumps, fans, and gearboxes across every major industrial sector in the Kingdom. Manufactured by Schaeffler to ISO 492 / DIN 625 tolerances, the 6208-C3 carries an inner bore of 40 mm, outer diameter of 80 mm, and a width of 18 mm — dimensions that correspond to the E2 motor-frame family spanning 5.5 kW to 22 kW, which represents the single largest population of motor bearings in Saudi Arabia's process industries. The C3 internal clearance designation indicates a radial clearance greater than the CN (normal) class, ensuring that differential thermal expansion between shaft and housing during start-up in ambient temperatures exceeding 45°C does not preload the bearing into premature fatigue, a critical consideration in the Kingdom's summer operating environment.

Schaeffler's manufacturing process for the 6208-C3 employs case-hardened bearing-quality chrome steel (100Cr6) for both rings and balls, with raceway geometry held to sub-micron tolerances using their proprietary grinding and superfinishing lines in Schweinfurt. The result is a bearing with a basic dynamic load rating (C) of 29.1 kN and a basic static load rating (C0) of 17.8 kN, translating to a calculated L10 life that consistently exceeds competitor bearings in back-to-back field trials. The pressed steel cage is dimensioned to retain adequate lubricant — typically Shell Gadus S2 V100 2 or FAG Arcanol MULTI2 — through drain intervals common in Saudi industrial facilities. The open variant allows field re-lubrication via grease nipple, while shielded (ZR) and sealed (RSR) variants are available where bearing housings are not designed for periodic re-greasing.

In Saudi Arabia's rotating equipment market, the FAG 6208-C3 is specified by ARAMCO's EDD engineering department as a preferred alternative bearing for standard IEC motors on upstream wellhead pump drives in the Eastern Province. SABIC affiliates at Jubail Industrial City carry the 6208-C3 as a critical spare for polyethylene and methanol plant cooling tower fan motors, where the combination of high ambient temperature, vibration from imbalanced fan assemblies, and infrequent maintenance windows demands the highest available fatigue life at this bearing size. SWCC desalination plants along the Red Sea and Arabian Gulf coasts rely on FAG 6208-C3 bearings in seawater feed pump motors, where corrosive humid conditions further stress bearing materials. Razz Middle East maintains in-kingdom stock of the 6208-C3 and its shielded and sealed variants in Riyadh, Dammam, and Jeddah for same-day dispatch to plant maintenance teams.

Razz Middle East is the authorised Schaeffler distributor supplying FAG and INA products to customers across the Kingdom, including engineering contractors, OEM manufacturers, plant maintenance teams, and industrial MRO distributors. Our bearing specialists provide cross-reference matching, lubrication advice, and bearing selection support to help Saudi customers specify the correct Schaeffler product for their operating conditions, load case, and maintenance philosophy — whether that is a standard open bearing for a regreased motor or an X-life sealed variant for a maintenance-free critical drive.